* copyright (C) 1984-2019 merrill consultants dallas texas usa
Yüklə 28,67 Mb.
|
|
MXG enhanced INFILE exit for CICS now supports DB2. TYPE89 28.331 INVALID DATA FOR SMF89CZT if APAR OA31615 installed. TYPE111 28.329 CTG records had zero observations in TY111CXI "IPIC". JCLINSTT 28.328 Complete JCL example to ftp/unterse/install on z/OS. TYPENDM 28.327 Connect Direct/NDM 'RT' record INCOMPATIBLY changed. TYPE102 28.325 DB2 SQL-text variables only 100 bytes if COMPRESS=NO. TYPEIMSA 28.311 Support for IMS/DBCTL transactions in IMSTRAN. TYPEIMS7 28.310 Support for IMS/DBCTL transactions in IMS0708. TYPE0 28.313 Variable CVTTZ in TYPE0 could be one second wrong. BUILDPDB 28.305 PDB.NJEPURGE did not contain all NJE-variables. ANALDUPE 28.308 Removal of Duplicate SMF (or any) records. TYPEVMXA 28.315 PFXCPUAD in VXSYTCUM is the LCPUADDR, no CPUID. TYPEVMXA 28.307 Short LINUXKRNL MONWRITE record caused errors. UTILGETM 28.312 No Reporting Class data in SMFSMALL with NRECORD=10. TYPE89 28.304 SMF 89 with no usage segment INPUT EXCEEDED error. TYPE30 28.302 TYPE30MU duplicate records exist, non-dupes removed. TYPETCP 28.300 TYPETCP (SMF 118) Port Numbers (Dec) wrong on ASCII. TYPE70EN 28.299 Wrong values for CPUID=0 in PDB.TYPE70EN.
TYPE113 28.279 "Near duplicate" ASUM113 intervals are corrected. TYPE89 28,282 Support for APAR OA31615, adds zIIP/zAAP CPU times. TYPENMON 28.275 Support for NMON FCREAD/FCWRITE/XFERIN/XFEROUT record TYPETNG 28.273 Support for more than 9999 instances in CA NSM/TNG. TYPETMVT 28.287 Support for ASG-TMON for VTAM subtype 'SX' record. TYPE110 28.285 CICS Statistics Subtype 2 STID=143 corrected. ASUMUOWT 28.284 ASUMUOWT (for ASG-TMON MRO) revised to use VMXGUOW. ASUMCICR 28.281 Count/average response time by DATE for each APPLID. DB2ACCT 28.277 NETSNAME/UOWTIME only created for QWHCATYP=4 (CICS). TYPE89 28.272 SMF89HOF/SMF89DTO for SCRT don't use last 3 nybbles. WEEKBLD 28.269 TYPE72DL NOT SORTED after Clock Set Back. ANALDBJS 28.290 DB2 analysis adds JESNR and REAdTIME to DB2ACCT. TYPE6156 28.289 Variables GATLIMIT and GATCNT added to TYPE6156. UTILNPRT 28.268 Identify non-print chars, for SAS Enterprise Guide.
MXG 28.06 was required to process the V10 data, but now, MXG 28.07 has full support plus the below documentation. TYPEOMMQ 28.263 Support for IBM/OMEGAMON XW MQ flat file (INCOMPAT) TYPEMIM 28.262 Support for CA MIM RESOURCE SHARING R11.7 (COMPAT) GRAFCEC 28.261 SAS/GRAPH example charts CEC Utilization by engine TYPETPX 28.260 IP address and Port Number now decoded in TPX SMF. UTILEXCL 28.259 Spurious "WRONG LENGTH OF 200 FOR CMRDATA" TYPE120 28.258 Support for WebSphere ID=120 SUBTYPE=20 records ANALID 28.257 ERROR: VARIABLE IDANDSUM ... with PDB,DISP=OLD EXITCICS 28.251 ASMA144E Begin-to-continue due to char in col 72. READDB2 28.250 COPYONLY logic now works. VMXGSUM 28.249 VMXGSUM enhanced with MODE and MEDIAN statistics TYPE110 28.247A Example using _Kdddddd to create new datasets revised TYPE30 28.246 New CPITCxTM/CPISRxTM wrong in MXG 28.06. TYPE7072 28.246 CP eng 64-95 vars shouldn't have been kept in TYPE70. TYPESTC 28.244 STC/STK/Oracle VSM user SMF records support revised. TYPE7072 28.242 In-Ready Work Unit SMF70U00-U15, etc were all wrong.
TYPEDB2 28.222 ITRM only, DB2STAT4 NOT SORTED ERROR. ASUMDB2- 28.220 DB2 Summary ASUMDBxx and Trending TRNDDBxx revisions. TRNDDB2- 28.220 DB2 Summary ASUMDBxx and Trending TRNDDBxx revisions. EXITCICS 28.223 Support for DB2 V10 Compressed SMF records. DFH$MOLS 28.223 JCL example to use IBM CICS decompression utility. TYPEITRF 28.227 INPUT STATEMENT EXCEEDED RECORD LENGTH type=17x. TYPEIMFS 28.193 Full support for IMF records in SMF format. TYPE113 28.226 Variable LPBUSY,LPARBUSY replaced LPARCPU. m TYPE74 28.212 TYPE74ID (small) created, saves pass of TYPE74CA. Major enhancements added in MXG 28.05, dated Aug 18, 2010 The z196 processor with more than 64 engines REQUIRES MXG 28.05. A z196 with LESS THAN 64 engines DOES NOT require MXG 28.05, as long as the operating system is z/OS 1.11 or earlier. z/OS 1.12 REQUIRES MXG 28.05. DO NOT USE MXG 28.04 WITH z/OS 1.12 RMF data records. IBM Maintenance APARs OA30563,OA33976 REQUIRES MXG 28.05. Many 28.175 Support for z/OS 1.12 (REQUIRES MXG 28.05). DO NOT USE MXG 28.04 WITH z/OS 1.12 DATA - INCOMPAT. TYPE70 28.175 Support for z196: REQUIRED ONLY WITH GT 64 ENGINES. (Lots of new data added compatibly.) TYPE113 28.166 Major revision - TYPE113 - John Burg's SHARE 2010. (Calculation of RNI, new z196 fields, new metrics). TYPE119 28.175 Support for SMF 119 new subtypes 32-37 and 48-52. TYPEITRF 28.162 Support for ITRF V420 IF2 (COMPATIBLE). TYPECTCP 28.160 Support for CleverView GMT offset, CTCPIPAD fixed. TYPE42 28.158 Support for APAR OA31648 TYPE42D1/D3 buff get retries TYPEVM 28.157 Support for VM ACCOUNT ID='09' ISFC record. TYPE102 28.156 Support for IFCID=27 specific variables. TYPENMON 28.176 Support for SARMON - Solaris SAR in NMON format. IMACCADI 28.172 Support for CA-Dispatch V11 SMF 6 INCOMPATIBLE. TYPETPFC 28.152 Support for zTPFC TPF Continuous Monitoring updates. TYPEZCOS 28.151 Support for zCost AutoSoftcapping V 1.5.00 SMF. UTILPDSL 28.179 Utility to read PDS/PDSE directories of a concat. BLDSMPDB 28.177 Continued minor enhancements. IMACZDAT 28.174 Example to set ZDATE when you rebuild a past PDB. ANALCAPD 28.169 Estimate the impact of a Defined Capacity Limit. MULTIPDB 28.168 Create a PDB library with all datasets from many PDBs TYPEIMS 28.165 LCODE=56x TPCPSSTY09x INPUT STATEMENT EXCEEDED. TYPE110 28.154 Improved detection of EXCLUDED CICS fields. TYPEXAM 28.153 XAM TCP dataset's TOTCPU incorrectly divided by 100. TYPE42 28.150 Type 42 subtype 15 correction for TYPE42S1 dataset.
ANALDB2R 28.146 Major enhancement to DB2PM-like reporting. TYPESVIE 28.138 Support for SysView Subtype 3 records. TYPEIMFS 28.137 Support for BMC IMF records written in SMF format. TYPE120 28.133 Support for WebSphere SMF 120 Subtype 20, untested. TYPESAVR 28.127 Support for revised CA $AVERS SMF record (INCOMPAT). TYPEMXI 28.126 Support for Rocket Software MXG User SMF record. TYPENTSM 28.119 Support for Performance Sentry NTSMF Version 3.1.4.4. TYPEMVAO 28.118 Support for BMC Mainview Auto Operator data file. TYPE102 28.116 Support for SMF 102 IFCID 263 decodes unique fields. BLDSMPDB 28.125 Support for Week/Month if first-day-of-week NOT MON. CONFIGVx 28.128 ERROR APPARENT MACRO TRIM NOT RESOVED: DOCUMENTATION. VMXGSRCH 28.147 Kewl Tool. Find all instances of VARIABLE='VALUE'. BUILDPDB 28.139 Recently added SMF30xxx variables kept in PDB.STEPS. UTILWORK 28.123 Utility for TYPE72GO to assist workload definitions.
TYPECTCP 28.108 Support for CleverView for TCP/IP TN3270 SMF subtype. TYPE80A 28.107 TOKDANAM LDAPHOST,BINDDN,BINDPW,APPLNAM,UTYPE,JPNUM. TYPE92 28.106 SMF92PPN, Path Name, was blank. VMXGSUM 28.105 Optional KEEPWEEK/MNTH/YEAR/DAYS/AFTER keeps TRENDs. TYPE7072 28.099 Variable CPULHKTM, CPU TIME Lock Promoted, TYPE72GO. VMXGSET 28.098 DSETOPT= optional argument for data set options. SMFRECNT 28.089 BUILDPDBs PDB.SMFRECNT now has bytes and counts. TYPE110 28.087 Internal Decompression Algorithm use now ERROR:'d. TYPECIMS 28.084 BMC IMF INPUTCLS and LASTCLAS variables restored. READDB2 28.083 READDB2/ANALDB2R did not honor MACDB2H/MACKEEP. FORMATS 28.082 UDDDDDD, all and $MGDDDSN updated. Major enhancements added in MXG 28.02, dated Apr 14, 2010 TYPE113 28.075 John Burg formulas for TYPE113 HIS data are added. VMXGINIT 28.079A Test for NOWORKINIT and USER ABEND 990 were REMOVED. VMXGINIT 28.081 OPTIONS VARLENCHK=NOWARN eliminates SAS V9.2 WARNINGS VMXGINIT 28.057 ERROR MACRO %ABORT IS NOT IMPLEMENTD, SAS 8.2 ONLY. TYPE84 28.077 Support for all JES3 JMF TYPE84 subtypes. ASMIMSL6 28.066 Support for IMS Version 11 (INCOMPATIBLE). TYPEIMS7 28.066 Support for IMS Version 11 (INCOMPATIBLE). TYPEMVCI 28.065 Support for BMC CICS CMRDETL C660 for CICS/TS 4.1 TYPEDB2 28.051 Support for DB2 APAR PK62161 new SQL Counters. TYPETMNT 28.079 WARNING: TOTAL LENGTH OF VARIABLES MUST BE LT 32760. TYPEDB2 28.073 DB2STATS had missing values for QW0225 variables. TYPE42 28.072 TYPE42X4 Above the BAR LRU dataset variables wrong. BUILDPDB 28.071 PDB.STEPS/PDB.JOBS duplicates if FLUSHED steps. MXGSAS92 28.070 SAS 9.2 TS2M2 DSNAMES may have changed TYPERMVV 28.048 RMFV CPUG3 was misaligned in z/OS 1.11
EXIT112 28.027* Do NOT assemble EXIT112 for SMF 110/112, use EXITCICS Errors fixed: ASMTAPEE 28.041 Do NOT use ASMTAPEE ML-45/46, CPU SPIKE: ML-47 fixed. TYPEVMXA 28.025 MXG CPU Loop in TYPEVMXA, new CEX3C PRCAPMCT=9 crypto TYPECIMS 28.028 BMC IMF INPUT STATEMENT EXCEEDED, short record. TYPEEDGR 28.029 RMM datetime vars have always been wrong time zone. TYPE120 28.038 SMF 120 SUBTYPE 9 INPUT STATEMENT EXCEEDED RECORD ANALZPCR 28.021 Major fixes/enhancements for complex zPCR models. TYPE0 28.009 INVALID DATA FOR CVTTZ in z/OS 1.11 Type 0 fixed. ASUMTAPE 28.008 SPIN.SPINSYSL dataset could grow forever. New stuff: VMXGFIND 28.012 Kewl tool, find all obs in all datasets meeting test, (like all obs with JOB='CICS' in all PDB datasets). TYPESTC 28.005 Support for Sun StorageTek VSM Version 6.2 and 7.0. TYPE89 28.015 Support for z/TPM SMF 89 record, subtype wrong byte. TYPENTSM 28.042 New Sentry VM 3.1.4.3 adds VMWARE objects/metrics. TYPE30 28.031 z/OS 1.11 GA added variables to SMF 30 and SMF 71. VMXGINIT 28.023 New MXGERROR/USER ABEND 990 if NOWORKINIT is enabled. TYPEZTPF 28.043* zTPF has major revisions in Performance Data TYPETMS 28.040 CA-1 Retention and VMRECORD extensions, need data. Changes:
TYPE74 28.039 R7451RID now one byte, R7451FLG/TYPE74CA overlays. BUILDPDB 28.037 PDB.SMFINTRV will have EXCP/IOTM counts for FLUSHED. TYPE103 28.036 TYPE1032 deaccum needed PORTNR, label changed. VGETOBS 28.034 %TRIM() references here removed, still in VMXGSUM. IMACICMR 28.032 Protect 200-byte CMRDATA on CICS/TS 3.2 (s/b 256). VGETDDS 28.014 Colon in DDNAMES= worked only with DDNAMES=PDB:) TYPEDB2 28.010 Variable SHIFT (from QWHSSTCK, END) kept in datasets. Please read CHANGESS for the complete list of major enhancements. See member NEWSLTRS or the Newsletters frame at http://www.mxg.com for current MXG Technical Notes. All of these enhancements are described in the Change Log, below.
Service Pack 4, on any supported SAS platform. SAS Hot Fix for SAS Note 37166 is required to use a VIEW with the MXG EXITCICS/CICSFIUE CICS/DB2 Decompression Infile Exit. And, only for z/OS 1.10 with SAS V9.1.3 with ANY version of MXG, the SAS Hot Fix for SN-35332 is REQUIRED (to be completely safe). Without this Hot Fix, "LIBREF XXXXXXXX IS NOT ASSIGNED" errors can occur even though //XXXXXXXX DD is a valid SAS Data Library. This error ONLY occurs with z/OS 1.10 and SAS V9.1.3; it does NOT occur with SAS V9.2, nor with z/OS 1.9. It can be circumvented by adding a LIBNAME statement that specifies the ENGINE name. See the Technical Note in Newsletters for SN-35332. Old MXG code may continue to execute with SAS V8.2, but V8 is now "Level B" support from SAS Institute, and there are known errors in V8.2 that are only fixed in SAS V9. I no longer QA with V8.2; While many MXG programs (accidentally) will still execute under V8.2, I can not guarantee that all of MXG executes error free. PLEASE INSTALL V9.2 ASAP, FOR BOTH OF US, TO AVOID FIXED PROBLEMS. MXG Software has not executed under SAS V6 in many years. The "PDB" libraries (i.e., SAS data libraries) must be created by SAS V8 or later, but any of those data libraries can be read or updated by the SAS Versions that MXG Supports, above. For SAS Version V9.2 (TS1M0): Big Picture: SAS Version V9.2 is COMPATIBLE with MXG Software. On z/OS, SAS changed the DSNAMES for some of the SAS libraries, so you do need to use the new MXGSAS92 JCL Procedure for MXG, but it still uses the CONFIGV9 configuration file.
However, NEW, and documented in Change 27.356, with SAS V9.2: The standard SAS JCL Procedure can be used for MXG: // EXEC SAS,CONFIG='MXG.SOURCLIB(CONFIMXG)' //MXGNAMES DD DSN=MXG.USERID.SOURCLIB(MXGNAMES),DISP=SHR instead of using the MXGSAS92 JCL Procedure example. ****************************************************************
V9.2-created "PDBs" can be read/written by SAS V8.2 or V9.1.3, and vice versa.
and with NO ERRORS reported. Pre-MXG 26.03, SAS Hot Fix F9BA07 was required to suppress a new SAS V9.2 WARNING, that on z/OS, set CC=4 (condition/return code). That warning is harmless (to MXG code) and all MXG created SAS datasets were correct, even with that warning. The ONLY exposure was ONLY on z/OS, and ONLY if condition code tests are used in your MXG jobstreams. SAS Version 9.2 requires z/OS 1.7 or later, both officially as documented by SAS Institute, and actually as V9.2 fails with 0C4 under z/OS 1.4.
not support long length character variables, it can't be used. SAS V9.1.3 with current Service Pack 4 is STRONGLY RECOMMENDED. For (back-level!) SAS V9.1 or V9.1.2 on z/OS: SN-013514 is REQUIRED to be able to read datasets that were created by V6SEQ (tape) engine. SN-012437 is REQUIRED to prevent creation of corrupt/unreadable datasets with tape engines V7SEQ, V8SEQ, or V9SEQ. Both fixes ARE included in SAS V9.1.3, but V9.1 or 9.1.2 is NOT SAFE without those two hot fixes, and if you do NOT have those two fixes on 9.1 or 9.1.2, you MUST set V6SEQ in CONFIGV9. With MXG 23.02 or later, V9SEQ is the default sequential engine specified in CONFIGV9, but if you are back at SAS V9.1 or V9.1.2 you MUST install the two hot fixes listed above.
as a absolute minimum level when that SAS Version was last supported by MXG Software. PLEASE INSTALL SAS V9.x ASAP.
V9SEQ was fixed in V9.1.3; it has been default in CONFIGV9. V8SEQ was always safe under SAS V8.2, but it wasted CPU time by always compressing when writing in tape format. V6SEQ, if used under V9.1.2, requires SN-013514, but V6SEQ should no longer be used, as it does not support long length variables.
on Windows XP with 32-bit INTEL, and on Windows Seven Ultimate both 32-bit and 64-bit OS on 64-bit hardware, but MXG is installed on many more hardware and software platforms: since they all work, we don't need to list them. If SAS executes so does MXG.
that time on Linux RH8 on Intel, on Solaris v2.8 on a Model V880, and on HP-UX v11.11 model rp5470, confirming full compatibility.
platform without errors! Each new MXG version is also tested with the SAS ITSV/ITRM product by the ITRM developers.
WPS Version 2.3.5 required MXG 27.05. See NEWSLETTERS for "MXG Support for WPS Software" IV. MXG Version Required for Hardware, Operating System Release, etc. Availability dates for the IBM products and MXG version required for error-free processing of that product's data records:
Product Name Date Required MVS/ESA 4.1 Oct 26, 1990 8.8 MVS/ESA 4.2 Mar 29, 1991 9.9 MVS/ESA 4.2.2 Aug 15, 1991 9.9 MVS/ESA 4.3 Mar 23, 1993 10.10 MVS/ESA 5.1.0 - compatibility Jun 24, 1994 12.02 MVS/ESA 5.1.0 - Goal Mode May 3, 1995 13.01 MVS/ESA 5.2.0 Jun 15, 1995 13.05 MVS/ESA 5.2.2 Oct 19, 1995 13.09 OS/390 1.1.0 Feb 22, 1996 14.01 OS/390 1.2.0 Sep 30, 1996 14.05 OS/390 1.3.0 Compatibility Mode Mar 28, 1997 14.14 OS/390 1.3.0 WLM Goal Mode Mar 28, 1997 15.02 OS/390 2.4.0 Sep 28, 1997 15.06 OS/390 2.5.0 Feb 24, 1998 15.06 OS/390 2.6.0 Sep 24, 1998 16.04 OS/390 2.7.0 Mar 26, 1999 16.09 OS/390 2.7.0 APAR OW41318 Mar 31, 2000 18.03 OS/390 2.8.0 Aug 24, 1999 16.09 OS/390 2.8.0 FICON/SHARK Aug 24, 1999 17.08 OS/390 2.8.0 APAR OW41317 Mar 31, 2000 18.03 OS/390 2.9.0 Mar 31, 2000 18.03 OS/390 2.10.0 Sep 15, 2000 18.06 OS/390 PAV Oct 24, 2000 18.09 z/OS 1.1 Mar 30, 2001 18.11 z/OS 1.1 on 2064s Mar 30, 2001 19.01 z/OS 1.1 with correct MSU Mar 30, 2001 19.02 z/OS 1.2 Oct 31, 2001 19.04 z/OS 1.1,1.2 APARs to 78 Oct 31, 2001 19.05 z/OS 1.2+ APAR OW52227 Apr 26, 2002 20.02 z/OS 1.3+ APAR OW52227 Apr 26, 2002 20.02 z/OS 1.2 JESNR Z2 MODE Apr 26, 2002 20.03 z/OS 1.3 JESNR Z2 MODE Apr 26, 2002 20.03 z/OS 1.4 Tolerate Sep 27, 2002 20.03 z/OS 1.4 Support Sep 27, 2002 20.06 z/OS 1.4 Over 16 CPUs/LPARs May 29, 2003 21.02 z/OS 1.4 DFSMS/rmm, RACF Aug 29, 2003 21.04 z/OS 1.5 Mar 31, 2004 21.21 z/OS IRD ASUM70PR/ASUMCEC Sep 22, 2003 *24.10 z/OS IRD TYPE70PR Mar 11, 2004 *24.10 z/OS IRD TYPE70,RMFINTRV Mar 22, 2002 *24.10 z/OS 1.6 - No IFAs Sep 30, 2004 *22.09 z/OS 1.6 - With IFAs Sep 30, 2004 *22.11 z/OS 1.7 (COMPATIBLE CHANGES) Sep 30, 2005 *24.10 z/OS 1.7 (SPLIT70 CORRECTION) Sep 30, 2005 *24.10 z/OS IFA data in RMF 79s Sep 30, 2005 23.10 z/OS 1.8 - ASMTAPEE assembly Sep 30, 2005 *25.03 z/OS 1.8 - SMF 119 INCOMPAT Sep 30, 2005 *25.06 z/OS More than 32 LPARs Jan 30, 2006 *24.24 z/OS SPLIT RMF 70 records Jan 30, 2006 *24.24 z/OS Dupe SYSTEMs in a SYSPLEX Jan 30, 2006 *24.02 z/OS IRD errors corrected May 15, 2006 24.03 z/OS ASUMCEC errors corrected May 15, 2006 *24.24 z/OS ASUM70LP errors corrected Jun 13, 2006 *24.24 z/OS zIIP Processor Support Jun 22, 2006 *24.24 z/OS Dedicated zIIP Support Mar 8, 2008 *26.01 z/OS Dedicated zAAP Support Mar 8, 2008 26.01 z/OS 1.8 (COMPATIBLE CHANGES) Sep 20, 2006 *24.24 z/OS 1.9 (INCOMPAT, 54 CPs) Sep 27, 2007 25.10 z/OS 1.9 MXGTMNT at ML-39 reASM Sep 27, 2007 25.10 z/OS new z10 variables Mar 5, 2008 26.01 z/OS 1.8 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.9 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.10 (INCOMPAT, MXG code) Sep 15, 2008 26.07 z/OS 1.10 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.10 RMF III, SMF 119 Jul 20, 2009 27.05 z/OS 1.11 Sep 2, 2009 27.08 z/OS 1.11 New 30 variables Apr 14, 2010 *28.02 z/OS 1.12 Aug 17, 2010 *28.05 z990 CPUs - CPUTYPE '2084'x Aug 25, 2003 21.04 z890 CPUs - CPUTYPE '2086'x Jun 24, 2004 22.07 z9 CPUs - CPUTYPE '2094'x Jul 20, 2005 *24.24 z9EC CPUs - CPUTYPE '2094'x: with 64-bit z/OS - no change required *24.24 with 32-bit z/OS only: Aug 26, 2006 24.06 z9BC CPUs - CPUTYPE '2096'x: with 64-bit z/OS - no change required 24.01 with 32-bit z/OS only: Jul 27, 2006 *24.24 z10 CPUs - CPUTYPE '2097'x Dec 7, 2008 25.11 z10 HiperDispatch/Parked Time Mar 3, 2008 *26.10 z196 (INCOMPAT IF GT 64 ENG) Aug 17, 2010 28.05 CICS/ESA 3.2 Jun 28, 1991 9.9 CICS/ESA 3.3 Mar 28, 1992 10.01 CICS/ESA 4.1 Oct 27, 1994 13.09 CICS/ESA 5.1 aka CICS/TS V1R1 Sep 10, 1996 14.07 CICS-Transaction Server V1R1 Sep 10, 1996 14.07 CICS-TS V1R1 with APAR UN98309 Sep 15, 1997 15.06 CICS-TS V1R2 CICS/TS 1.2 Oct 27, 1997 15.06 CICS-TS V1R3 CICS/TS 1.3 Mar 15, 1999 17.04 CICS-TS V2R2 CICS/TS 2.2 Feb 9, 2002 19.19 CICS-TS V2R3 CICS/TS 2.3 Aug 13, 2004 22.04 CICS-TS V3R1 CICS/TS 3.1 Jan 18, 2005 22.22 CICS-TS V3R2 CICS/TS 3.2 Dec 6, 2007 25.11 CICS-TS for Z/OS Version 2.1 Mar 15, 2001 18.11 CICS-TS for Z/OS Version 2.2 Jan 25, 2002 19.19 CICSTRAN subtype 1 support only *19.19 CICSTRAN subtype 2 completed *19.08 CICS-TS for Z/OS Version 2.3 Dec 19, 2003 Using UTILEXCL to create IMACEXCL: 21.04 Reading un-Excluded CICS with TYPE110, no IMACEXCL:*22.04 CICS-TS for Z/OS Version 3.1 Mar 15, 2005 Using UTILEXCL to create IMACEXCL: 22.13 Reading un-Excluded CICS with TYPE110, no IMACEXCL: 22.22 CICS-TS for Z/OS Version 3.2 Jun 29, 2007 25.03 CICS-TS/3.2 Compressed Records Nov 3, 2007 25.11 CICS-TS/4.1 (CICSTRAN INCOMPAT) Mar 13, 2009 27.01 CICS-TS/4.1 (STATISTICS ST=2) Sep 18, 2009 27.08 DB2 2.3.0 Oct 28, 1991 10.01 DB2 3.1.0 Dec 17, 1993 13.02A DB2 4.1.0 Tolerate Nov 7, 1995 13.07 DB2 4.1.0 Full support Sep 11, 1996 14.07 DB2 5.1.0 Tolerate Jun 27, 1997 14.14 DB2 5.1.0 Full support Jun 27, 1997 15.02 DB2 6.1.0 initial support Mar 15, 1999 16.09 DB2 6.1.0 all buffer pools Mar 15, 1999 18.01 DB2 6.1.0 parallel DB2 Mar 15, 1999 19.19 DB2 7.1.0 parallel DB2 Mar 31, 2001 19.19 DB2 7.1.0 corrections Mar 31, 2001 20.06 DB2 8.1 Tolerate, no packages Mar 31, 2004 20.20 DB2 8.1 New Data Packages wrong Mar 31, 2004 21.08 DB2 8.1 Support with Packages Mar 31, 2004 23.09* DB2 8.1 with all zIIP Variables Sep 30, 2006 24.08 DB2 8.1 +PK47659 Sep 12, 2008 26.08 DB2 9.1 See Change 25.265. Dec 7, 2007 25.11 DB2 9.1 Full Support +PK/56356 Sep 12, 2008 26.08 DB2 10.1 Tolerate Oct 1, 2010 28.06 DB2 10.1 Full plus Compressed. Nov 1, 2010 28.07* Yüklə 28,67 Mb. Dostları ilə paylaş:
|