8: 00 am 5: 00 pm Poster Thursday, October 22, 2015

P1A5-4  Generation of calibration curve with pulse compression technique for ultrasound-based temperature estimation Su A Lee^1, Jong Seob Jeong^1 ^1Medical Biotechnology, Dongguk University, Gyeonggi-do, Korea, Republic of	P1A5-12  The dynamic excitation of a chain of pre-stressed spheres for biomedical ultrasound applications: contact mechanics finite element analysis and validation Pierre Gelat^1, Nader Saffari^1, David Hutchins^2, Jia Yang^2, Omololu Akanji^2, Peter Thomas^2, Lee Davis^2, Steven Freear^3, Sevan Harput^3 ^1UCL Mechanical Engineering, University College London, United Kingdom, ^2School of Engineering, University of Warwick, United Kingdom, ^3School of Electronic and Electrical Engineering, University of Leeds, United Kingdom	P1A6-4  A Sub-Nyquist Sampling Analog Front-End with Mixer-Based Subarray Beamforming for B-Mode Ultrasound Imaging Jonathon Spaulding^1, Boris Murmann^1 ^1Stanford University, Stanford, California, USA	P1A7-1  In vivo Investigation for Accuracy Estimation of Vector Flow Mapping Tomohiko Tanaka^1, Takashi Okada^2, Tomohide Nishiyama^2, Yoshinori Seki^2, Ken-ichi Kawabata^1 ^1Hitachi, Ltd., Japan, ^2Hitachi Aloka Medical, Ltd., Japan	Session P2A1. Ultrasonics in Air and Water Chair: Jiromaru Tsujino Kanagawa University
P1A5-5  Visualization of the intensity field of a high intensity focused ultrasound (HIFU) source in situ Trong Nguyen^1, Minh Do^1, Michael L. Oelze^1 ^1Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, USA	P1A5-13  Extracorporeal Acute Cardiac Pacing by High Intensity Focused Ultrasound in Practice and Theory Amit Livneh^1, Eitan Kimmel^1, Dan Adam^1 ^1Biomedical Engineering, Technion-Israel Institute of Technology, Haifa, Israel	P1A6-5  Combined use of edge-detection and tissue Doppler for robust left ventricle segmentation Sigurd Storve^1, Fredrik Orderud^2, Hans Torp^1 ^1Department of Circulation and Medical Imaging, Norwegian University of Science and Technology, Norway, ^2GE Vingmed Ultrasound, Norway	P1A7-2  Validation of a novel vector method for blood peak detection in an anthropomorphic phantom Riccardo Matera^1, Stefano Ricci^1, Alfred C.H. Yu^2, Billy Y.S. Yiu^2, Piero Tortoli^1 ^1Information Engineering Dept., Università di Firenze, Florence, Italy, ^2Medical Engineering Program, University of Hong Kong, Pokfulam, Hong Kong	P2A1-1  Ultrasonic transducer characterization in air based on an indirect acoustic radiation pressure measurement Anastasia Guseva^1, Maik Hoffmann^1, Alexander Unger^2, Silvia Zulk^3, Mohamed Balla El Amien^4, Ennes Sarradj^1, Mario Kupnik^2 ^1BTU Cottbus-Senftenberg, Germany,^2Technische Universität Darmstadt, Germany, ^3Leibniz Universität Hannover, Germany, ^4University of Sharjah, United Arab Emirates
P1A5-6  Inducing antivascular effects in tumors with ultrasound stimulated micron sized bubbles Naomi Matsuura^1, Minseok Seo^2, Niroo Sivapalan^2, Siqi Zhu^2, Ben Leung^2, David Goertz^3,4 ^1Medical Imaging, University of Toronto, Canada, ^2Sunnybrook Research Institute, Canada, ^3Sunnybrook Research Institute, Toronto, ON, Canada, ^4Medical Biophysics, University of Toronto, Canada	P1A5-14  HIFU real-time feedback control using localized motion imaging with dynamic cross correlation window Xiaolei Qu^1, Takashi Azuma^1, Ryusuke Sugiyama^1, Kengo Kanazawa^1, Mika Seki^1, Akira Sasaki^1, Hideki Takeuchi^1, Keisuke Fujiwara^2, Kazunori Itani^2, Satoshi Tamano^3, Shu Takagi^1, Ichiro Sakuma^1, Yoichiro Matsumoto^1 ^1The University of Tokyo, Japan, ^2Hitachi Aloka Medical, Ltd., Japan, ^3Tohoku University, Japan	P1A6-6  Streak artifact reduction for blind deconvolution of multibeam image Kangwon Jeon^1, Hyuntaek Lee^1, Munkyeong Hwang^1, Yongsup Park^1 ^1Digital Media & Communications R&D Center, Samsung Electronics, Suwon, Gyeonggi, Korea, Republic of	P1A7-3  Novel Design of Patient-Specific Cerebral Aneurysm Phantoms for Intraoperative Ultrasound Investigations C. K. Ho^1, Adrian J. Y. Chee^1, Billy Y. S. Yiu^1, Anderson C. O. Tsang^2, K. W. Chow^3, Alfred C. H. Yu^1 ^1Medical Engineering Program, University of Hong Kong, Pokfulam, Hong Kong, ^2Department of Surgery, University of Hong Kong, Pokfulam, Hong Kong, ^3Department of Mechanical Engineering, University of Hong Kong, Pokfulam, Hong Kong	P2A1-2  Side Lobe Suppression for Air-Coupled Ultrasonic Transducers with Parabolic Horn Koji Ibata^1, Rokuzo Hara^1, Tomonori Kimura^1, Toru Fukasawa^1, Hiroaki Miyashita^1, Satoru Inoue^1 ^1Mitsubishi Electric Corporation, Japan
P1A5-7  Enhanced Cavitation Activities from Axial Split Foci Using Second/Third-Harmonic Superimposition for Focused Ultrasound Surgery Mingzhu Lu^1, Yubo Guan^1, Yujiao Li^1, Mingxi Wan^1 ^1Department of Biomedical Engineering,School of Life Science and Technology,Xi'an Jiaotong University, The key Laboratory of Biomedical Information Engineering of Ministry of Education, Xi'an, Shaanxi, China, People's Republic of	P1A5-15  Pulse Inversion Technique for HIFU Treatment Monitoring in Real Time Byungwoo Kang^1, Hyuncheol Kim^2,3, Jin Ho Chang^1,3 ^1Electronic Engineering, Sogang University, Korea, Republic of,^2Chemical and Biomolecular Engineering, Sogang University, Korea, Republic of,^3Interdiciplinary Program of Integrated Biotechnology, Sogang University, Korea, Republic of	P1A6-7  Dynamic Baseband Pulse Compression for Coded Excitation Imaging Yeajin Kim^1, Jinbum Kang^1, Yangmo Yoo^1,2 ^1Electronic Engineering, Sogang University, Seoul, Korea, Republic of, ^2Interdisciplinary Program of Integrated Biotechnology, Sogang University, Korea, Democratic People's Republic of	P1A7-4  Implementation and evaluation of slow-time Golay decoding for pre-clinical high-frequency color Doppler imaging in mice Che-Chou Shen^1, Jyun-Gong Yu^1, Gency Jeng^2 ^1Electrical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ^2S-Sharp Corporation, Taiwan	P2A1-3  Calibration of ultrasonic hydrophones based on spherically focused self-reciprocity technique Guangzhen Xing^1, Ping Yang^2, Pengcheng Hu^1 ^1Institute of Ultra-precision Optoelectronic Instrument Engineering, Harbin Institute of Technology, Harbin, Heilongjiang, China, People's Republic of, ^2Division of Mechanics and Acoustics, National Institute of Metrology, Beijing, Beijing, China, People's Republic of
8:00 am - 5:00 pm	Poster --- Thursday, October 22, 2015			4th floor
Session P2A2. SHM in Concrete Chair: Joel Harley University of Utah	P2A3-3  Optimal Lamb wave mode and frequency selection for assessment of creep damage in titanium alloy plates Yanxun Xiang^1, Fu-Zhen Xuan^2 ^1East China University of Science and Technology, Shanghai, Shanghai, China, People's Republic of, ^2East China University of Science and Technology, China, People's Republic of	P3A1-3  “Ultrasonic studies of physicochemical parameters of biofuels in a broad range of pressures and temperatures” Piotr Kielczynski^1, Marek Szalewski^1, Andrzej Balcerzak^1, Krzysztof Wieja^1, Aleksander Rostocki^2, Ryszard Siegoczyñski^2, Stanislaw Ptasznik^3 ^1Polish Academy of Sciences, Poland,^2Warsaw University of Technology, Poland, ^3Institute of Agricultural and Food Biotechnology, Poland	P3A1-11  LATERAL ELECTRIC FIELD EXCITED RESONATOR BASED ON PZT CERAMICS Andrey Teplykh^1, Boris Zaitsev^1, Iren Kuznetsova^2 ^1Kotel’nikov Institute of Radio Engineering and Electronics of RAS, Saratov Branch, Saratov, Russian Federation, ^2Kotel’nikov Institute of Radio Engineering and Electronics of RAS, Moscow, Russian Federation	Session P4A2. Microacoustic Resonators Chair: Maximilian Pitschi TDK Corporation
P2A2-1  Low Frequency Coded Waveform for the Inspection of Concrete Structure M.N.I.B. Mohamed^1, S. Laureti^1,2, M. Ricci^2, L.A.J. Davis^1, P. Burrascano^2, D.A. Hutchins^1 ^1School of Engineering, University of Warwick, Coventry, United Kingdom,^2Polo Scientifico Didattico di Terni, Università degli Studi di Perugia, Terni, Italy	P2A3-4  Detection of Low-frequency Components in Ultrasonic Waves Transmitted through Contact Solids Yuji Kato^1, Hirotaka Tanaka^1, Toshihiko Sugiura^1 ^1Keio University, Japan	P3A1-4  Experimental Investigation on the Jet-like Acoustic Streaming in front of an Oscillating Circular Piston Arturo Santillan^1 ^1Department of Technology and Innovation, University of Southern Denmark, Odense M, Fyn, Denmark	Session P4A1. Sensors & Applications I Chair: Mauricio Pereira da Cunha University of Maine	P4A2-1  Optimized Response of AlN Stack For Chipscale GHz Ultrasonics Jason Hoople^1, Justin Kuo^1, Jeffrey Soon Bo Woon^2, Navab Singh^2, Amit Lal^1 ^1Electrical and Computer Engineering, Cornell University, USA, ^2Institute of Micoelectronics, Singapore
P2A2-2  Reverse Time Migration Based Ultrasonic Imaging of Rebars Embedded in Concrete Surendra Beniwal^1, Abhijit Ganguli^1 ^1Civil Engineering, Indian Institute of Technology Delhi, Delhi, India	P2A3-5  Reconfigurable and Programmable System-on-Chip Hardware Platform for Real-time Ultrasonic Testing Applications Pramod Govindan^1, Boyang Wang^1, Pingping Wu^1, Ivan Palkov^1, Vidya Vasudevan^1, Jafar Saniie^1 ^1Electrical and Computer Engineering, Illinois Institute of Technology, Chicago, Illinois, USA	P3A1-5  Dyadic Universal Functions and Simultaneous Near-field/Far-field Regularization of Elasto-dynamic Dyadic Green’s Functions for 3D Mass-loading Analysis in Micro-acoustic Devices alireza baghai-wadji^1 ^1Electrical Engineering, University of Cape Town, Cape Town, South Africa	P4A1-1  Investigation of langasite surface acoustic wave pressure sensors with a structure of reinforcing its pressure sensitivity Honglang Li^1, Yabing Ke^1, Yiyu Zhao^1, Lina Cheng^1, Shitang He^1 ^1Institute of acoustics, China, People's Republic of	P4A2-2  Low Loss and Wide Band Filters Using New Dispersive@Interdigital Transduceres with Floating Electrodes Kazuhiko Yamanouchi^1 ^1Acoustic Wave Labo.,Ltd, Japan
P2A2-3  Study on Non-Contact Acoustic Imaging Method for Concrete Structures -The 2nd Construction Method using a Strong Ultrasonic Sound Source- Tsuneyoshi Sugimoto^1, Kazuko Sugimoto^2, Noriyuki Utagawa^3, Kageyoshi Katakura^4 ^1Graduate School of Engineering, Toin University of Yokohama, Yokohama, Japan, ^2Graduate School of Engineering, Toin University of Yokohama, Japan, ^3SatoKogyo Co., Ltd., Japan, ^4Meitoku Engineering, Japan	P2A3-6  Model-based parameter estimation for defect characterization in ultrasonic NDE applications Yufeng Lu^1, Jafar Saniie^2 ^1Electrical and Computer Engineering, Bradley University, Peoria, Illinois, USA,^2Electrical and Computer Engineering, Illinois Institute of Technology, Chicago, Illinois, USA	P3A1-6  Ultrasonic batch processing of ultra heavy crude oil for viscosity reudction on the industrial scale Delong Xu^1, Jingjun Deng^1, Weijun Lin^1, Chao Li^1, Lixin Bai^1 ^1Institute of Acoustics, Chinese Academy of Sciences, Beijing, China, People's Republic of	P4A1-2  Development of SAW current sensor based on the magnetomechanics effect Yana Jia^1, Wen Wang^1, Xinlu Liu^1, Shitang He^1 ^1Chinese Academy of Sciences, Institute of Acoustics, Beijing, China, People's Republic of	P4A2-3  Acoustic Micro-resonator Utilizing Hemispherical Air Cavity for Sensitivity Enhancement Anton Shkel^1, Eun Sok Kim^1 ^1Electrical Engineering, University of Southern California, Los Angeles, CA, USA