ALUMINIUM PROFILE WITH OPAL DIFFUSER EQUIPPED WITH LED STRIP
piece
39
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor and the architectural details DT6b, DT7a.
Technical specifications: aluminium profile with opal diffuser, equipped with LED strip - 9.6W/m, 120Led/m, 12Vdc or equivalent. Maximum dimensions: lxh: 15.9x7.mm, height 1.5m x 2 pieces
REFLECTOR TYPE LIGHT FIXTURE
piece
16
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications: aluminium profile, with maximum profile dimensions lxh:182x1122mm, 164mm cutout width, data mode with 2 spots: power 2x7W, 230Vac, adjustable 0-30grade or equivalent. Fascicle between 33grade and 50 grade.
MOVING HEAD WASH
piece
8
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications in which it should fit: LED moving head wash.
19 quad color LED's with RGBW color mixing. With wide linear zoom function starting from min 10 degrees up to max 60 degrees This wide zoom range allow you to use the fixture as a beam effect either a wash light. Equipped with high torque motors to ensure fast movements. Possibility of section control. DMX 512 control protocol
Light source and optics: 19 x 10W RGBW Full Color LEDs, Lumens: 3950 lm, Lux @3m: 16’000, Color synthesis: RGBW Full Color mixing (>16 million colors) for a limitless color range and variable CTC control, white temperature presets: 3200K~10000K, beam angle: 10°-60° Fast-Zoom Electronic linear zoom with motorized and scrolling lens panel, LEDs average life span: >50'000 h Dimmer/Shutter/Strobe/Colors: 0-100% linear dimmer, 4 different dimming curves available, Independent shutter and fading effects with adjustable speed, Strobe: Electronic, 1-20 flash per second, Virtual color wheel with LEE and rainbow presets, CTC control through independent DMX channel, Backlit single-lens optics for stunning visual effects.
Black LCD display for simplified access to control menu, configuration and DMX addressing. DMX configuration: 15 channels. Flicker-free operations (>400Hz) 2,4GHz Wireless DMX antenna receiver, Cooling: forced ventilation with variable-speed low-noise fans, no heat generation. Hi-resistance polymer case designed for improved heat dissipation. Motion Angle: Pan = 540° Tilt = 220°. Pan/Tilt resolution: 8-bit or 16-bit
Suspension and fixing: any possible working position through "quick lock" omega brackets (included)
Power supply: 100-240V 50/60Hz
Connections: PowerCON IN/OUT
MOVING HEAD LED SPOT
piece
8
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications in which it should fit: Moving head LED Spot with high efficient 70-150 W LED source, high efficient optics for maximizing the output, 8 colors, 7 gobo´s, motorized focus, 3-facet prism, electronic dimmer and fast strobe. DMX 512 control protocol
High-power white LED, Brightness: 24500 Lux @1mt
Projection angle: 17°/20° manual zoom
High efficiency optical system, High definition anti-reflection lenses with achromatic coating, Focus: motorized focusing, from 2 m to infinity, 0-100% linear dimmer, Independent shutter and fading effects with adjustable speed, strobe: mechanical, 1-20 flash per second, color wheel with 8 dichroic filters + open (linear-stepless selection), rainbow effect with speed adjustment, easy calibration and maintenance by magnetic repositioning, rotating gobo wheel: 7 interchangeable gobos (1 of which dichroic), gobos rotation in both CW and CCW direction, “Gobo-shake” effect and continuous rotation, easy access to gobo wheel for replacement through slot-n-lock panel, effect wheel with 3 facet prism rotating in both directions at different speed
Easy show: built-in programs with automatic/sound activated mode enabled by LCD control panel, User Interface: LED display to control unit DMX addressing, general settings, 2 DMX available configurations: 8 channels (8 bit) and 14 channels (16 bit) for advance or basic control mode, Input and output signal through XLR 3p connector
High resistance and flame retardant polymer case in black color, Motion Angle: Pan = 540° Tilt = 360°, Pan/Tilt resolution: 8-bit or 16-bit, Pan = 2,10° Pan Fine = 0,008° Tilt = 1,41° Tilt Fine = 0,006°,
Automatic repositioning of effects in case of accidental movements Suspension and fixing: any possible working position through omega kit (included)
Power unit: 100-240V 50/60Hz
PROFILE SPOT
piece
4
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications: Profile spot, small size
Profile spot small format - for theatre and stage use, 575W HPL. Accessories included. (lamp, c-clamp, safety wire, iris shutter)
Professional profiler using HPL575 230V-575W halogen lamp 3200°K (not included).Lamp holder: G9,5 base. Optics: high efficiency optical system with fine lamp centering adjustment. Field angle: 36°.Rotating Shaping System with steel shutter blades that allows the shaping of polygonal figures. Filter-frame with a spring hook for a quick filter change.
Power supply: 230V~ 50Hz, connection cable (without plug).
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Professional LED PAR fitted with 4in1 RGBW LEDs, 18 LED’s SMD/COB
Par LED 18x8W, design super-SLIM, RGBW/ FC, White color temperature preset: 3200K~10’000K, Flicker free operations (400Hz), DMX control:4/6/10ch operation, IP54, 200W, ≤5Kg, 45°
RECESSED LINE TYPE LAMP 85x1500mm
piece
16
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications : profile dimensions lxh: 85x90mm, L=900-907mm. Cutout depending on the profiles dimensions, equipped with LED, maximum power 40W
RECESSED LINE TYPE LAMP
85x4740mm
piece
1
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications : profile dimensions lxh: 85x90mm, L=86X4740mm. Cutout depending on the profiles dimensions, equipped with LED, aprox. power 4,35W/10cm
LED TUBE TYPE LAMP
piece
3
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications: linear light fixture, with LED tubeT5, 10W, 230V
or equivalent.
Dimensions L=850-890mm, l-45mm, h=90mm. 1 piece
Technical specifications: linear light fixture, with LED tube T5, 13W, 230V
or equivalent.
Dimensions L= 1190-1200, l=45mm, h=90mm. 2 pieces
SURFACE MOUNTED LAMP ON THE MIRROR
piece
3
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
Technical specifications: approximate dimensions 593-600mmx62mmx52mm, rectangular shape, placed on the mirror. Linear light fixture with LED tubeT5, 7W, 230V or equivalent.
For details check Annex no.2.B and the drawing A13.Lighting and sound – ground floor
PVC membrane tensioned upon heating and fitted on profiles fixed on the perimeter and above the membrane a flexible LED strip will be fixed with maximum 9.6W/m, 12V dc, 120Led/m, IP 20 or equivalent, for interior mounting. (A27+A28.Views of the guest bathroom ground floor)
