Annual Report Department

4.10Applied combustion

2003P04 K. VANOVERBERGHE, E. VAN DEN BULCK, W. HUBNER, M. TUMMERS, Multiflame patterns in swirl-driven partially premixed natural gas combustion, ASME Journal of Engineering for Gas Turbines and Power, Vol. 125, 2003, pp. 40-45.

2003P05 K. VANOVERBERGHE, E. VAN DEN BULCK, M. TUMMERS, Confined annular swirling jet combustion, Journal for Combustion Science and Technology, Vol. 175, No. 3, 2003, pp. 545-578.

2003P16 L. HELSEN, E. VAN DEN BULCK, M. VAN BAEL, J. MULLENS, Arsenic release during pyrolysis of CCA treated wood waste: current state of knowledge, Journal of Analytical and Applied Pyrolysis, Vol. 68-69, 2003, pp. 613-633.

2003P22 L. HELSEN, E. VAN DEN BULCK, H. COOREMAN, C. VANDECASTEELE, Development of a sampling train for arsenic in pyrolysis vapours resulting from pyrolysis of arsenic containing wood waste, Journal of Environmental Monitoring, Vol. 5, 2003, pp. 758-765.

2003P29 L. HELSEN, E. VAN DEN BULCK, Metal retention in the residue after low-temperature pyrolysis of chromated copper arsenate (CCA) treated wood, Environmental Engineering Science, Vol. 20, No. 6, 2003, pp. 569-580.

2003P18 E. VAN DEN BULCK, Generic linear acoustic analysis of longitudinal combustion chambers, The 5^th Euromech Fluid Mechanics Conference, Toulouse, France, August 24-28, 2003, book of abstracts.

2003P23 L. HELSEN, Disposal of chromated copper arsenate (CCA) treated wood waste: is low-temperature pyrolysis an option?, Invited lecture at the 6^th Workshop of COST Action E22 Environmental optimisation of wood protection, Zagreb, Croatia, September 22-23, 2003.

2003P49 M. VANIERSCHOT, K. VANOVERBERGHE, E. VAN DEN BULCK, Hysteresis and Coanda effects in annular swirling cold flows, The 5th Euromech Fluid Mechanics Conference, Toulouse, France, August 24-28, 2003, book of abstracts.

2003P07 K. VANOVERBERGHE, E. VAN DEN BULCK, Premixed swirling jet combustion; its relation to flow pattern, turbulence and emission control, 6^th National Congress on Theoretical and Applied Mechanics, Gent, May 26-27, 2003.

2003P09 M. VANIERSCHOT, K. VANOVERBERGHE, E. VAN DEN BULCK, Hysteresis and Coanda effects in annular swirling cold flows, 6^th National Congress on Theoretical and Applied Mechanics, Gent, May 26-27, 2003.

2003P27 M. VANIERSCHOT, E. VAN DEN BULCK, Curious effects in annular swirling jets, Proceedings of the annual workshop of the Belgian Ercoftac Pilot Centre, Brussels, Belgium, December 5, 2003.

2003P08 T. PERSOONS, E. VAN DEN BULCK, S. FAUSTO, Study of pulsating flow in a close-coupled catalyst manifold, 6th National Congress on Theoretical and Applied Mechanics, Gent, May 26-27, 2003. NCTAM-2003-115.

2003P11 L. HELSEN, E. VAN DEN BULCK, Low-temperature pyrolysis of CCA treated wood waste: mechanism responsible for arsenic release, Pyrolysis and gasification of biomass and waste, edited by A.V. Bridgwater, CPL Press, UK, ISBN 1 872691 77 3, 2003, Chapter 18, pp. 175-186.

4.11Safety Engineering

2003P41 F. VERPLAETSEN, Handboek Explosiebeveiliging, Wolters-Kluwer, ISBN 9067168211.

2003P39 F. VERPLAETSEN, Die Explosionschutz Regeln, Handboek Explosiebeveiliging, Wolters-Kluwer, ISBN 906716 8211, 2003, pp. 33240/01-26.

2003P40 F. VERPLAETSEN, Die Explosionschutz Regeln: Toepassingen, Handboek Explosiebeveiliging, Wolters-Kluwer, ISBN 906716 8211, 2003, pp. 33240/27-44.

4.12Biomedical engineering

2002PP055 E. PARLOO, P. GUILLAUME, J. ANTHONIS, W. HEYLEN, J. SWEVERS, Modelling of sprayer boom dynamics by means of maximum likelihood identification techniques, Part 1: A comparison of input-output and output-only modal testing, Biosystems Engineering, 2003, 85 (2): 163-171.

2002PP056 E. PARLOO, P. GUILLAUME, J. ANTHONIS, W. HEYLEN, J. SWEVERS, Modelling of sprayer boom dynamics by means of maximum likelihood identification techniques, Part 2: Sensitivity-based mode shape normalisation, Biosystems Engineering, 2003, 85 (3): 291-298.

03PB01 HIEU L.C., BOHEZ E., VANDER SLOTEN J., PHIEN H.N., VATCHARAPORN E., BINH P.H., AN P.V., ORIS P., Design for medical rapid prototyping of cranioplasty implants, Rapid Prototyping Journal, Vol. 9, No 3, 2003, 175-186.

03PB02 SITTHISERIPRATIP K., VAN OOSTERWYCK H., VANDER SLOTEN J., MAHAISAVARIYA B., BOHEZ E., SUWANPRATEEG J., VAN AUDEKERCKE R., ORIS P., Finite element study of trochanteric gamma nail for trochanteric fracture, Medical Engineering & Physics, Vol. 25, Nr; 2, 2003, 99-106.

03PB03 DENAYER I, THAELS K, VANDER SLOTEN J, GOBIN R Teaching a structured approach to the design process for undergraduate students by problem-based education, Eur. J. Eng. Ed. (2003) 28, 2, pp. 203-214.

03PB04 GERIS L., VAN OOSTERWYCK H., VANDER SLOTEN J., DUYCK J., NAERT I., Assesment of mechanobiological models for the numerical simulation of tissue differentiation around immediately loaded implants, Computer Methods in Biomechanics and Biomedical Engineering, 6 (5-6), 2003, 277-288.

03PB05 VAN LIERDE C., DEPREITERE B., VANDER SLOTEN J., VAN AUDERKERCKE R., VAN DER PERRE G., GOFFIN J., Skull biomechanics: The energy absorbability of the human skull frontal bone during fracture under quasi-static loading, Journal Applied Biomaterials and Biomechanics, 1, 2003, 194 – 199.

03PB06 DE GERSEM H., GERIS L., Zoektocht naar een levende prothese, Het Ingenieursblad, 72, 2003, 8-9.

2003PP173 K. DENIS, G. VAN HAM, J. VANDER SLOTERN, R. VAN AUDEKERCKE, G. VAN DER PERRE, J. DE SCHUTTER, J. BELLEMANS, G. FABRY, Registration of the tibia in robot-assisted total knee arthroplasty using surface matching, Computer Assisted Radiology and Surgery, 17th International Congress and Exhibition, London, June 25-28, 2003, 664-669.

2003PP174 K. DENIS, A. RANFTL, G. VANHAM, J. VANDER SLOTEN, R. VAN AUDEKERCKE, G. VAN DER PERRE, J. DE SCHUTTER, J. BELLEMANS, G. FABRY, Registration of the tibia in robot-assisted total knee arthroplasty: a comparison of different registration techniques, Medial Image Computing and Computer Assisted Intervention, Montréal, November 15-18, 2003, 182-189.

03PB07 GERIS L., VAN OOSTERWYCK H., ANDREYKIV A., VANDER SLOTEN J., VAN KEULEN F., DUYCK J., NAERT I., Numerical simulation of peri-implant tissue differentiation in a bone chamber , Proceedings of ECM IV, Davos in European Cells and Materials 2003; 5 (suppl. 2): p. 16-17.

03PB08 VANDAMME K., GERIS L., DUYCK J., VAN OOSTERWYCK H., VANDER SLOTEN J., DE COOMAN M., PUERS R. & NAERT I., Quantification of the role of mechanical parameters on the bone response around loaded titanium implants, Proceedings of ECM IV, Davos in European Cells and Materials 2003; 5 (suppl. 2): p. 96-97.

03PB09 SCHROOTEN J., VAN CLEYNENBREUGEL T., VAN OOSTERWYCK H., VANDER SLOTEN J., Biomechanical Design of Porous Ceramic Structures for Bone Growth Stimulation. Ceramics, Cells and Tissues: 8th Annual Seminar & Meeting, Faenza, Italy, March 18 – 21, 2003 in European Cells and Materials 2003; 5 (suppl. 2): p. 94-95.

03PB10 VANDER SLOTEN J, VAN OOSTERWYCK H, PATTIJN, VAN CLEYNENBREUGEL T, Numerical pre-clinical testing in hard tissue surgery, BioMedicine2003, Fifth International Conference on Simulations in Biomedicine, April 2-4, 2003, Ljubljana, Slovenia, p. 295-303.

03PB11 DENIS K, VAN HAM G, VANDER SLOTEN J, VAN AUDEKERCKE R, VAN DER PERRE G, DE SCHUTTER J, BELLEMANS J, FABRY G. Registration of the tibia in robot-assisted total knee arthroplasty using surface matching, Computer Assisted Radiology and Surgery, 17th International Congress and Exhibition, London, June 25-28, 2003, p 664-669.

03PB12 MOMMAERTS M.Y., JANSSENS G., JANS G., VANDER SLOTEN J., VAN DER PERRE G., Clinical validation of individual templates in cranial reconstruction, Computer Assisted Radiology and Surgery, 17th International Congress and Exhibition, London, June 25-28, 2003, p.1263-1268.

03PB13 DE WILDE T., HAEX B., FORAUSBERGER C., DENIS K., HUYSMANS T., VANDER SLOTEN J., A contact-free optical measuring system for the acquisition of anatomical structures in 3D, Proceedings of the XVth Triennial Congress of the International Ergonomics Association, August 24-29, 2003, Seoul, Korea (4 pages).

03PB14 HAEX B., HUYSMANS T., DE WILDE T., VAN BRUSSEL K., VANDER SLOTEN J., VAN AUDEKERCKE R., VAN DER PERRE G., An anthropometrics-based design assistant for the development of optimized sleeping systems, Proceedings of the XVth Triennial Congress of the International Ergonomics Association, August 24-29, 2003, Seoul, Korea (on CD-rom).

03PB15 VAN LIERDE C., DEPREITERE B., VANDER SLOTEN J., VAN AUDEKERCKE R., VAN DER PERRE G., GOFFIN J., How to optimize bicycle helmet design in order to avoid traumatic skull and brain damage, Proceedings of the XVth Triennial Congress of the International Ergonomics Association, August 24-29, Seoul, Korea (on CD-rom).

03PB16 HAEX B., DRUYTS H., HOSTENS I., DE CRAECKER W., HUYSAMANS T., COOREVITS P., VANDERSTRAETEN G., VAN AUDEKERCKE R., RAMON H., A composite approach towards whole-body vibration comfort analysis, Proceedings of the 15th Triennial Congress of the International Ergonomics Association and The 7th Joint Conference of Ergonomics Society of Korea/Japan, Ergonomics Society, 24-29 August 2003, Seoul, on CD-ROM.

03PB17 HOSTENS I., HAEX B., SCHAERLI H., BULLINGER A., STEFANI O, DANGELMAIER A., BEKIARIS E., AMDITIS A., RAMON H., Objective seat evaluation methodology for suspended seats, Proceedings of the 15th Triennial Congress of the International Ergonomics Association and The 7th Joint Conference of Ergonomics Society of Korea/Japan, Ergonomics Society, 24-29 August 2003, Seoul, on CD-ROM.

03PB18 DRUYTS H., DE CRAECKER W., HOSTENS I., HAEX B., COOREVITS P., VAN AUDEKERCKE R., VANDERSTRAETEN G., RAMON H., Measurements and analysis of whole-body vibration comfort parameters for advanced human modelling. Proceedings of the 38th Conference on Human Responses to Vibration, Gosport, United Kingdom, 19-21 September 2003, p 371-379.

03PB19 DENIS K, RANFTL A, VAN HAM G, VANDER SLOTEN J, VAN AUDEKERCKE R, VAN DER PERRE G, DE SCHUTTER J, BELLEMANS J, FABRY G. Registration of the tibia in robot-assisted total knee arthroplasty: a comparison of different registration techniques, Medical Image Computing and Computer Assisted Intervention, Montréal, November 15-18, 2003, 182-189.

03PB20 VANDER SLOTEN J., DENIS K., VAN HAM G., DE SCHUTTER J., VAN AUDEKERCKE R., VAN DERPERRE G., DE GERSEM G., VAN BRUSSEL H., VAN BRUSSEL K., Computer aided surgery systems, Proceedings of the 6th International Conference: Advances in Science and Technology 41, Materials in clinical applications VI, eds. P. Vincenzini, R. Barbucci, CIMTEC 2002, Techna Srl. 2003 – ISBN: 88-86538-43-X, 397-408.

03PB21 VAN DER PERRE G., Assessment of bone mechanical properties by ultrasound and vibration, Proceedings of the 6th International Conference: Advances in Science and Technology 41, Materials in clinical applications VI, eds. P. Vincenzini, R. Barbucci, CIMTEC 2002, Techna Srl. 2003 – ISBN:88-86538-43-X, 289-300.

03PB22 ZEMAN M.E., VAN OOSTERWYCK H., VANDER SLOTEN J., CERROLAZA M., Biological parameters involved in overload induced resorption: Implementation by means of a damage mechanics remodelling model, International Congress on computational Bioengineering, Eds. M. Doblaré, M. Cerrolaza and H. Rodrigues, September 2003, 6 p.

03PB23 SCHROOTEN J., JAECQUES S.V.N., ELOY R., DELUBAC C., SCHULTHEISS C., BRENNER P., BUTH L.H.O., VAN HUMBEECK J. and VANDER SLOTEN J., Bioactive glass coating for hard and soft tissue bonding on Ti6Al4V and silicone rubber using electron beam ablation, in: Key Engineering Materials Vols. 254-256 (2004), Proc. Bioceramics 16, 16th International Symposium on Ceramics in Medicine, Porto, 6-9/11/2003pp. 427-430.

03PB24 HEYLEN C., DIERCKX K., THAELS K. GOBIN R., VANDER SLOTEN J., Teaching a concurrent engineering approach in project based engineering design, International Workshop “New WEB technologies for collaborative design, learning and training”, Torino, November 14th 2003, 3 pages.

03PB25 VANDER SLOTEN J., Conception de prothèses squelettiques, 3 D MODELLING 2003, 23-24 April, 2003.

03PB26 VAN DER PERRE G., E-learning in regional and international networks of universities, presentation at the VLIR-International Symposium on ICT, Gent, 9 April 2003.

03PB27 DEPREITERE B., C VAN LIERDE, R VAN AUDEKERCKE, G VAN DER PERRE, J VANDER SLOTEN, C PLETS, J GOFFIN. Lateral head impacts and protection of the temporal area by bicycle safety helmets, Euroacademia Multidisciplinaria Neurotraumatologica, May 2003, Graz (Austria).

03PB28 VAN OOSTERWYCK H., GERIS L., VANDER SLOTEN J., ANDREYKIV A., VAN KEULEN F., DUYCK J., NAERT I., Numerical simulation of tissue ingrowth and differentiation around a loaded implant in a bone chamber, Integrated Systems in Dental Healthcare, Milan, Italy, 29-30 May, 2003.

03PB29 MURARU L., JAECQUES S.V.N., DE SMET E., VAN OOSTERWYCK H., WEVERS M., NAERT I., VANDER SLOTEN J., Adaptive bone response around mechanically stimulated threaded implants in guinea pig tibiae: exploration of micro-CT based finite element modelling as an in vivo follow-up tool, Symposium on Integrated Systems in Dental Healthcare, Milan, Italy, 29-30 May 2003.

03PB30 DE SMET E., JAECQUES S.V.N., JANSEN J.A., WEVERS M., VANDER SLOTEN J., VAN DER PERRE G. , NAERT I., Improving implant integration of early loaded implants by controlled mechanical stimulation: an animal experimental study, 81st General Session of the International Association for Dental Research (IADR 2003, June 25-28, 2003, Goteborg, Sweden, J Dent Res 82 (Spec Iss B): 2947, 2003.

03PB31 BIANCHI S.D., DEMENASCO A.F., MUNETA M.L., VANDER SLOTEN J., TORNINCASA S., WEBD: Web-based learning and training in the field of biomedical and design engineering, Computer Assisted Radiology and Surgery, 17th International Congress and Exhibition, London, June 25-28, 2003, p. 1332.

03PB32 JAECQUES S.V.N., MURARU L., DE SMET E., VAN OOSTERWYCK H., WEVERS M., NAERT I., VANDER SLOTEN J., Micro CT-based finite element analysis: an enhanced follow-up tool for bone remodelling around threaded implants, Computer Assisted Radiology and Surgery, 17th International Congress and Exhibition, London, June 25-28, 2003, p. 1356.

03PB33 VAN CLEYNENBREUGEL T., SCHROOTEN J., VAN OOSTERWYCK H., VANDER SLOTEN J., Biomechanical design of porous structures for bone growth stimulation, European Cells & Materials IV: Bone Tissue Engineering, Davos, Switzerland, June 30 – July 2, 2003.

03PB34 VAN DER PERRE G., JAECQUES S.V.N., Ultrasound and Vibration to measure bone mechanical properties: an overview, ESEM 2003 conference, 18-21 Sept. 2003, Halle, Germany, Programme & Abstracts, Edited by G. Bisschof & H.J. Hein, Martin Luther Univ. Halle-Wittenberg, p. 54.

03PB35 DIERCKX K., VANDER SLOTEN J., JONES D.V., NOBLE B., CARMELIET G., High frequency and low amplitude mechanical loading as a countermeasure for bone loss in astronauts, 7th Conference of the European Society for Engineering and Medicine (ESEM), September 18-21, 2003, Halle, Germany, p. 65.

03PB36 VAN OOSTERWYCK H., GERIS L., DUYCK J., DE COOMAN M., ANDREYKIV A., VAN KEULEN F., PUERS R, NAERT I., VANDER SLOTEN J., Experimental and numerical study on mechanoregulation of tissue differentiation around a loaded implant in a bone chamber, ESEM 2003, Halle, Germany, 18-21 September, 2003, p. 69.

03PB37 RANFTL A, DENIS K, VANDER SLOTEN J, DE SCHUTTER J, BRUYNINCKX H, BELLEMANS J., Autonomous compensation for tissue and patient motion during robot-assisted surgery, 7th conference of the European Society for Engineering in Medicine, September 18-21, 2003, Halle, Germany, p. 102.

03PB38 MURARU L., JAECQUES S.V.N., DE SMET E., VAN OOSTERWYCK H., WEVERS M., NAERT I., VANDER SLOTEN J., Micro-CT based finite element modelling as an in vivo follow-up tool for adaptive bone response around implants in guinea pig tibiae, ESEM 2003 conference, 18-21 Sept. 2003, Halle, Germany, Programme & Abstracts, Edited by G. Bisschof & H.J. Hein, Martin Luther Univ. Halle-Wittenberg, p. 135.

03PB39 VANDER SLOTEN J., Computer integrated surgery (CIS) improved patient care by integrating engineering and medicine, 7th Conference of the European Society for Engineering and Medicine (ESEM), September 18-21, 2003, Halle, Germany, p. 152.

03PB40 OCCHIPINTI AMATO R., VAN OOSTERWYCK H., VANDER SLOTEN J., LA ROSA G., Numerical analysis of bone remodelling around oral implants subject to controlled loading, 7th Conference of the European Society for Engineering and Medicine (ESEM), September 18-21, 2003, Halle, Germany, p. 179.

03PB41 JAECQUES S.V.N., STOIAN A., VAN OOSTERWYCK H., SCHROOTEN J., VANDER SLOTEN J., SCHULTHEISS C. , Failure prediction of Bioactive Glass targets in Electron Beam Ablation process using Finite Element Analysis, 18th European Conference on Biomaterials, October 1-4, 2003, Stuttgart, Germany, in: H. Planck, M. Doser, C. Linti, editors, Proc. 18th Eur. Conf. Biomaterials, 2003, p. P039.

03PB42 RANFTL A, DENIS K, VANDER SLOTEN J, DE SCHUTTER J, BRUYNINCKX H, BELLEMANS J. Dynamic registration in orthopaedics- a new approach, Computer und Roboterassistierte Chirurgie, Erlangen, November 4-7, 2003.

03PB43 VAN DER PERRE G., Biomedical engineering, a case-study in networked e-learning, cEVU International Conference on Networked e-learning for European Universities, Granada, Spain, 23 - 25th November 2003.

03PB44 VANDER SLOTEN J., Finite element analysis for endosseous implant design, Journee CSMA, 29-30 January 2003, Université de Technologie de Compiègne.

03PB45 DEPREITERE B., VAN LIERDE C., VAN AUDEKERCKE R.,. VAN DER PERRE G, VANDER SLOTEN J., PLETS C., GOFFIN J., Biomechanics of acute subdural haematomas, Meeting van de Belgische Wetenschappelijke Vereniging voor Neurochirurgie, 29 maart 2003, Mont-Godinne.

03PB46 VAN LIERDE C., DEPREITERE B., VAN AUDEKERCKE R., VAN DER PERRE G., VANDER SLOTEN J., PLETS C., GOFFIN J., Biomechanics of cortical contusions, Meeting van de Belgische Wetenschappelijke Vereniging voor Neurochirurgie, 29 maart 2003 in Mont-Godinne.

03PB47 VAN OOSTERWYCK H., The role of mechanical loading in bone adaptation and tissue differentiation around oral implants: a combined clinical, animal experimental and numerical study, Seminar, Trinity College, 24 April 2003, Dublin.

03PB48 VAN OOSTERWYCK H., Bone loading and adaptation around oral implants: implications for clinical use, Seminar, Rheinische Friedrich-Wilhelms Universität Bonn, 30 April 2003, Bonn.

03PB49 VAN DER PERRE G., Staten Generaal 'E-learning in het hoger onderwijs', inleidende voordracht, Leuven 8-9 mei 2003.

03PB50 VAN DER PERRE G., Echografische methodologie in het botdensitometrisch onderzoek, Avondsymposium 1: Echografie en Geneeskunde, donderdag 9 oktober 2003, KaHo St. Lieven, Aalst.

03PB51 HAEX B., HUYSMANS T., DE WILDE T., DENIS K., FORAUSBERGER C., VANDER SLOTEN J., A contact-free optical measuring system for the acquisition of anatomical structures in 3D, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003, Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 49.

03PB52 GERIS L., VAN OOSTERWYCK H., VANDER SLOTEN J., DUYCK J., NAERT I., Simulation of tissue ingrowth and differentiation around a loaded implant in a bone chamber, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003, Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 50.

03PB53 GELAUDE F., PATTIJN V., VANDER SLOTEN J., VAN AUDEKERCKE R., Simulation and biomechanical evaluation of reconstructive surgery of the hip in children, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003, Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 52.

03PB54 VAN CLEYNENBREUGEL T., SCHROOTEN J., VAN OOSTERWYCK H., VANDER SLOTEN J., Biomechanical design of porous structures for bone growth stimulation, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003, Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 53.

03PB55 MURARU L., JAECQUES S.V.N., VAN OOSTERWYCK H., DE SMET E., WEVERS M., NAERT I., VANDER SLOTEN J., Adaptive bone response around implants in guinea pig tibiae: micro-ct based finite element modelling as an in vivo follow-up tool, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003, Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 54.

03PB56 JAECQUES S.V.N., STOIAN A., VAN OOSTERWYCK H., SCHROOTEN J., VANDER SLOTEN J., SCHULTHEISS C., Finite element analysis to explain failure of bioactive glass targets in electron beam ablation process, Third National day on Biomedical Engineering, Brussel, 17 oktober 2003,Proceedings of the Third Belgian Day on Biomedical Engineering, C. Veraart and P. Verdonck (Editors), Published by the Koninklijke Vlaamse Academie van België voor Wetenschappen en Kunsten, 2003, p 55.

03PB57 DEMEULENAERE B., SPAEPEN P., DE SCHUTTER J., Input Torque Balancing Using a Cam-Based Centrifugal Pendulum, Proceedings of 6th National Conference on Theoretical and Applied Mechanics, Paper No. 37, Gent, Belgium, 2003.

03PB58 DENIS K, VANDER SLOTEN J, DE SCHUTTER J, VAN AUDEKERCKE R, VAN DER PERRE G, BELLEMANS J AND FABRY G. Robot-assisted total knee arthroplasty, First Flanders Engineering PhD symposium, Brussel, December, 11, 2003, p. 11.

03PB59 PATTIJN V. SAMSON I., VANDER SLOTEN J., VAN AUDEKERCKE R., SWAELENS B., and DE BUCK V., Medical image based, preformed titanium membrane-type implants, Industry-Ready Innovative Research, 1st Flanders Engineering PhD Symposium, 11 December 2003, Diamant Building, Brussels, p. 16.

03PB60 P. GEVERS, J. DE LANGHE, N. DELODDERE, N. DE WILDE, L. DE WILDE, K. THAELS, P. TYTGAT, Delta 5/6 Ruimtemeetkunde (6-8u), Wolters Plantyn Mechelen, 2003, ISBN 90 301 7782 9.

03PB61 P. GEVERS, J. DE LANGHE, N. DELODDERE, N. DE WILDE, L. DE WILDE, K. THAELS, P. TYTGAT, Delta 5/6 Ruimtemeetkunde (6-8u) Handleiding, Wolters Plantyn Mechelen, 2003, ISBN 90 301 7927 9.

03PB62 VAN OOSTERWYCK H., DUYCK J., VAN CLEYNENBREUGEL J., PUERS B., VANDER SLOTEN J., NAERT I., Computer-aided, pre-surgical analysis for oral rehabilitation, In: Natali A (ed.) Dental Biomechanics, Taylor and Francis Group, New York, USA, 2003: 52-68.

03PB63 VAN OOSTERWYCK H., VANDER SLOTEN J., DUYCK J., NAERT I., Bone loading and adaptation around oral implants, In: de Las Casas EB, Pamplona D (eds.), Computational Models in Biomechanics, CIMNE, ISBN 84-95999-26-9, Barcelona, Spain, 2003: 1-40.

03PB64 JAECQUES S.V.N., HELSEN J.A., VANDER SLOTEN J. , Thermoplastic vulcanisates: application as a biomaterial in a canine total hip replacement model, in Recent Research Developments in Applied Polymer Science, Vol. 1 (2002), pp. 483-500, ed. S.G. Pandalai, Research Signpost, Trivandrum, India, ISBN: 81-7736-157-0 (Book released and reprints received 2003).

03RB65 JAECQUES S.V.N., VAN OOSTERWYCK H., MURARU L., VAN CLEYNENBREUGEL T., DE SMET E., WEVERS M., NAERT I. and VANDER SLOTEN J., Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone, ‘accepted for publication in Biomaterials’.

03RB66 DENIS K., BELLEMANS J., VAN HAM G., VANDER SLOTEN J., FABRY G., DE SCHUTTER J., VAN AUDEKERCKE R., and VAN DER PERRE G., Hybrid force/velocity control for registration and bone-machining in robot-assisted total knee arthroplasty.

03RB67 GERIS L., ANDREYKIV A., VAN OOSTERWYCK H., VANDER SLOTEN J., VAN KEULEN F., DUYCK J., NAERT I., Numerical simulation of tissue differentiation around loaded titanium implants in a bone chamber, ‘accepted for publicationJournal of Biomechanics’

03RB68 DEPREITERE B., VAN LIERDE C., VANDER SLOTEN J., VAN DER PERRE G., VAN AUDEKERCKE R., PLETS C., GOFFIN J., Lateral head impacts and protection of the temporal area by bicycle safety helmets.

03RB69 DEPREITERE B., VAN LIERDE C., VAN AUDEKERCKE R., VANDER SLOTEN J., VAN DER PERRE G., PLETS C., GOFFIN J., Skull fracture mechanics: investigation of the energy absorbed by the skull as a predictor variable for fracture.

03RB70 DEPREITERE B., VAN LIERDE C., VAN AUDEKERCKE R., VANDER SLOTEN J., VAN DER PERRE G., PLETS C., GOFFIN J., The mechanics of acute subdural haematomas caused by bridging vein rupture.

03RB71 CLAEYS C., OP DE BEECK I., VAN DEN BRANDEN J., VAN DER PERRE G., Het gebruik van eLeren in het volwassenenonderwijs in Vlaanderen, eindverslag van het ‘eLeren voor volwassenen’-project in opdracht van DIVA, juli 2003.

03RB72 VAN DEN BRANDEN J., VAN DER PERRE G., VAN PETEGEM W., De toekomst van e-leren in het hoger onderwijs in Vlaanderen. Op weg naar een virtuele leerruimte. Rapport n.a.v. de Staten-Generaal, georganiseerd door EuroPACE op 7-8 mei 2003 te Leuven in opdracht van het Ministerie van de Vlaamse Gemeenschap, Afdeling Technologie en Innovatie in het kader van het VirtUE-Vlaanderen project.