Curriculum Vitae Omer Arda Vanli August 11, 2015 General Information

Curriculum Vitae
Omer Arda Vanli
August 11, 2015

General Information
University address: Industrial and Manufacturing Engineering
FAMU-FSU College of Engineering
2525 Pottsdamer Street B-320
Florida State University
Tallahassee, Florida 32310
Phone: [phone]; Fax: [phone]

E-mail address: [e-mail]

Web site: http://www.eng.fsu.edu/~oavanli/

Professional Preparation
2007 Ph.D., Pennsylvania State University, University Park, PA. Major: Industrial Engineering and Operations Research. Minor in Statistics. Supervisor: Enrique Del Castillo.
Omer Arda Vanli. (2007). Statistical Process Adjustment Problems in Short-Run Manufacturing. Unpublished doctoral dissertation, Pennsylvania State University, University Park, PA. Retrieved from etda.libraries.psu.edu.
2000 M.S., Pennsylvania State University, University Park, PA. Major: Mechanical Engineering. Supervisor: Timothy C. Ovaert.
Omer Arda Vanli. (2000). Design and Performance Evaluation of a Closed-Loop Micro-Scratch Tester. Unpublished master's thesis, Pennsylvania State University, University Park, PA.
1998 B.S., Middle East Technical University, Ankara, Turkey. Major: Mechanical Engineering.

Professional Experience
2014–present Associate Professor and Director of Graduate Studies, Department of Industrial and Manufacturing Engineering, Florida State University, High Performance Materials Institute.
2012–present Assistant Professor and Director of Graduate Studies, Department of Industrial and Manufacturing Engineering, Florida State University, High Performance Materials Institute. Research Interests: Statistical Monitoring, Control and Optimization of Manufacturing Processes. Condition Monitoring and Reliability Modeling of Engineering Systems. Bayesian Methods. Teaching Interests: Design of Experiments, Time series analysis and Forecasting, Production System Analysis, Discrete-Event System Simulation.
2008–2012 Assistant Professor, Department of Industrial and Manufacturing Engineering, Florida State University, High Performance Materials Institute.
2007–2008 Business Analyst, MarketRx Inc, a Cognizant Company. Consulting services for pharmaceutical sales force planning and optimization.
2006 Summer Intern, Intel Corporation, Chandler, AZ. Automatic controller design for semiconductor manufacturing processes.
2005 Summer Intern, General Motors, Technical Center, Warren, MI. Automobile assembly process flow analysis and optimization.
2001–2002 Project Engineer, Belcan Engineering, Caterpillar Inc.- Technical Center, Peoria, IL. Computer simulation of material processing for construction equipment.

Honors, Awards, and Prizes
Second place in NSF REU Site Poster Competition (with William Biesiadecki), High Performance Materials Institute (2013).

Undergraduate teaching award (Nominated), Florida State University (2013).

Graduate of the Last Decade Award (Nominated), Penn State, Industrial and Manufacturing Engineering Department (2012).

Second place in Undergraduate Summer Internship Poster Competition (with David England), High Performance Materials Institute (2009).

Best Paper Award, SEMATECH AEC/APC Symposium, SEMATECH (2007).

Recognition award for development of generic process simulation test bed, Intel Corporation (2006).

Graduated with Distinction: Ranked 7th among 330 senior undergraduate students, Middle East Technical University (1998).

Current Membership in Professional Organizations
American Society for Quality (ASQ), Member

Institute for Operations Research and the Management Sciences (INFORMS) Member

Institute of Industrial Engineers (IIE), Member

Teaching
Courses Taught
Engineering Data Analysis (ESI5243)

Engineering Experiments (ESI5247)

Quality Control and Reliability Engineering (ESI 4234)

Engineering Experiments (ESI5247)

Quality Control and Reliability Engineering (ESI 4234)

Simulation of Industrial Engineering Systems (ESI4523)

Graduate Seminar (EIN5936)

Design of Integrated Production Systems and Facilities Layout (EIN4333)

Response Surface Methodology and Process Optimization (EIN5930-04)

Statistical Topics in Engineering (EGN3443)

Engineering Time Series Analysis and Forecasting (EIN5930-01)

New Course Development
Engineering Time Series Analysis and Forecasting (2008)

Curriculum Development
Master of Science in Industrial Engineering, with a specialization in Engineering Management of Orthotics and Prosthetics (MSIE-EMOP). Graduate program jointly offered by Florida State University and St. Petersburg College. This program offers students a foundation in the principles and application of advanced materials and engineering management principles with respect to formulating and solving O&P problems. The courses will be offered by FSU via distance learning (2013)

Doctoral Committee Chair
Giroux, R., doctoral candidate. Multivariate statistical process control for highway safety.

Mishra, S., doctoral candidate. Sensor network based condition monitoring of structural systems.

Omidvar, A., doctoral student. Highway safety and travel time reliability for aging populations.

Doctoral Committee Cochair
Anthony, T., graduate. (2012). Improving Photovoltaic Efficiency For Residential And Other Applications Employing Novel Nanofluid Recuperative Heat Transfer Methodology.

Downes, R. D., doctoral candidate. Mechanisms of CNT stretching alignment and effect of the alignment on properties of CNT composites.

Doctoral Committee Member
Wang, K., graduate. (2013). Multistage modeling and control of batch Buckypaper composite manufacturing process.

Li, S., graduate. (2012). Electrical Properties Of Carbon Nanotube Networks: Characterization, Modeling And Sensor Applications.

Tsai, Chao-Hsi, graduate. (2010). Elastic Properties Prediction of Buckypaper-Polymer Nanocomposites.

Chen, Yi-Wen, graduate. (2009). Theoretical and Experimental Investigation of Buckypaper Field Emission.

Bejoy P. Alduse, doctoral candidate. Reliability Assessment of Structures Under Repeated Wind Loads Using Monitored Data.

Paruthyvalappil, B., doctoral candidate.

Wang, H., doctoral candidate. Mass Customization in Manufacturing of Orthotic and Prosthetic Devices.

Wheaton, I. M., doctoral candidate.

Yang, Ming-Chia, doctoral candidate. Process Modeling and Improvement of Carbon Nanotubes in Aqueous Suspensions.

Doctoral Committee University Representative
Langston, J. L., doctoral student.

Master's Committee Chair
Symum, H., graduate. (2015). Modeling of Variation Propagation in Multistage Systems.

Duge', D., graduate. (2012). Statistical methods for impact identification in composite structures using electrical resistance measurement.

Gory, R. S., graduate. (2012). Damage Detection In Carbon Fiber Composites Using Electrical Resistance Measurements.

Chen, Li-Jen, graduate. (2010). Uncertainty quantification and multiaccuracy modeling of Nano-composite Processes.

Ding, Y., graduate. (2010). Fault Detection and Diagnosis of Manufacturing Systems.

Master's Committee Member
Jahan, M. D., graduate. (2014).

Degraff, J. H., graduate. (2014).

Wekezer, J. A., graduate. (2013). Pressure Distribution in Lower Limb Prosthesis: Quantification and Correlation.

Young, C. A., graduate. (2012). Study of fiber reinforced composites electronic enclosure using design software and carbon nanaotube buckypaper composite materials.

Kynard, K. A., graduate. (2011). Energy Absorption Applications of Nanofoams.

Young, J. P., graduate. (2009). Continuous Buckypaper Manufacturing Process.

Martin, A., graduate. (2008). Experimental Design for a Real Time Digital Ship Simulator.

Yang, Y., graduate. (2008). Multiple-Criteria Third Order Response Surface Designs.

Zhang, M., graduate. (2008). Monitoring of Weibull Distributed Processes.

Das, T., student.

Roy, M., student.

Bachelor's Committee Chair
Parra, C., graduate. (2010). Neural network based pattern recognition methods for hand writing image analysis (Honors thesis).

Senior Design Project team advising
Vanli, O. A. (2012–2013). Warehouse layout optimization for retailer distribution center. Florida State University.

Research and Original Creative Work
Publications
Refereed Journal Articles
Alduse, B. P., Jung, S., Vanli, O. A., & Kwon, S. D. (2015). Effect of uncertainties in wind speed and direction on the fatigue damage of long-span bridges. Engineering Structures, 100, 468-478.
Alduse, B. P., Jung, S., & Vanli, O. (2015). Condition-Based Updating of the Fragility for Roof Covers under High Winds. Journal of Building Engineering, 2, 36-43.
Mishra, S., Vanli, O. A., & Park, C. (2015). A Multivariate Cumulative Sum Method for Continuous Damage Monitoring with Lamb-wave Sensors. International Journal of Prognostics and Health Management, 6, 11. Retrieved from http://www.phmsociety.org/sites/phmsociety.org/files/phm_submission/2015/ijphm_15_015.pdf
Njuguna, J., Vanli, O. A., & Liang, R. (2015). A Review of Spectral Methods for Dispersion Characterization of Carbon Nanotubes in Aqueous Suspensions. Journal of Spectroscopy, 2015, 11. doi:10.1155/2015/463156
Lian, Z., Vanli, O. A., & del Castillo, E. (2014). Setup Adjustment for Asymmetric Cost Functions under Unknown Process Parameters. Quality Technology and Quantitative Management, 11(4), 471-489.
Vanli, O. A., & Jung, S. (2014). Statistical Updating of Finite Element Model with Lamb Wave Sensing Data for Damage Detection Problems. Mechanical Systems and Signal Processing, 1-2, 137-151.
Vanli, O. A. (2014). A Failure-Time Prediction Method for Condition-Based Maintenance. Quality Engineering, 26, 23. doi:335-349
Vanli, O. A. (2014). Monitoring of Proportional-Integral Controlled Processes using a Bayesian Time Series Analysis Method. Quality and Reliability Engineering International, 30, 1341-1351. doi:10.1002/qre.1555
Vanli, O. A., Chen, Li -Jen, Tsai, Chao-His, Zhang, C., & Wang, B. (2014). An Uncertainty Quantification Method for Nanomaterial Prediction Models. International Journal of Advanced Manufacturing Technology, 70(1), 33-44. doi:10.1007/s00170-013-5250-0
Do, Q. H., Fielitz, T. R., Zeng, C., Vanli, O. A., Zhang, C., & Zheng, J. P. (2013). Vanadium oxide- carbon nanotube composite electrodes for energy storage by supercritical fluid deposition: experiment design and device performance. Nanotechnology, 24, 315401.
Jung, S., Vanli, O. A., & Kwon, S. D. (2013). Wind Energy Potential Assessment Considering the Uncertainties Due to Limited Data. Applied Energy, 102, 1492–1503. doi:10.1016/j.apenergy.2012.09.011
Vanli, O. A., Zhang, C., & Wang, B. (2013). An Adaptive Bayesian Approach for Robust Parameter Design with Observable Time Series Noise Factors. IIE Transactions, 45 (4), 392-408. doi:10.1080/0740817X.2012.689123
Vanli, O. A., Zhang, C., Nguyen, A., & Wang, B. (2012). A Minimax Sensor Placement Approach for Damage Detection in Composite Structures. Journal of Intelligent Material Systems and Structures, 23(8), 919-932. doi:10.1177/1045389X12440751
Vanli, O. A., Zhang, C., & Wang, B. (2011). Adaptive Bayesian Methods in Semiconductor Manufacturing Process Control with Small Experimental Data Sets. IEEE Transactions on Semiconductor Manufacturing, 24(3), 418 – 431. doi:10.1109/TSM.2011.2129545
Vanli, O. A., Zhang, C., Chen, L. -J., Wang, K., & Wang, B. (2010). A Bayesian Approach for Integration of Physical and Computer Experiments for Quality Improvement in Nano-Composite Manufacturing. Quality and Reliability Engineering International, 26(7), 749-764. doi:10.1002/qre.1130
Vanli, O. A., & Del Castillo, E. (2009). Bayesian approaches for on-line robust parameter design. IIE Transactions, 41(4), 359-371. doi:10.1080/07408170802108534
Vanli, O. A., & Del Castillo, E. (2007). Closed-Loop System Identification for Small Samples with Constraints. Technometrics, 49(4), 382-394.
Vanli, O. A., Patel, N. S., Janakiram, M., & Del Castillo, E. (2007). Model context selection for run-to-run control. IEEE Transactions on Semiconductor Manufacturing, 20(4), 506-516. doi:10.1109/TSM.2007.907628

Invited Book Chapters
Vanli, O. A., & Del Castillo, E. (2014). Statistical Process Control for Manufacturing Systems. In John Baillieul and Tariq Samad (Ed.), Encyclopedia of Systems and Control (pp. 1-7). Springer.

Refereed Proceedings
Giroux, R., Vanli, O., & Ozguven, E. E. (submitted). Spatiotemporal Crash Rate Monitoring for Highway Safety. Manuscript submitted for publication, 19 pages.
Omidvar, A., Vanli, O., Ozguven, E. E., Moses, R., & Barrett, A. (submitted). Effect of Traffic Patterns on the Frequency of Aging Driver-involved Highway Crashes: A Case Study on the Interstate-95 in Florida. Manuscript submitted for publication, 17 pages.
Yontay, P., Pan, R., & Vanli, O. A. (2013). Sampling Schedule Optimization of Embedded Wireless Sensors for Degradation Monitoring. In International Conference on Prognostics and Health Management, June 24-27, 2013, Gaithersburg, MD. IEEE.
Jung, S., Alduse, B. P., Vanli, O. A., & Kwon, S. D. (2011). Effect of uncertainties on the buffeting-induced fatigue of long-span bridges. In Proceedings of the 13th International Conference on Wind Engineering, Amsterdam, The Netherlands. Amsterdam, The Netherlands.
Vanli, O. A. (2010). Adaptive Bayesian Methods in Manufacturing Process Control with Small Experimental Data Sets. In ASME 2010 International Design Engineering Technical Conferences (pp. 177-187). Montreal, Quebec, Canada: American Society for Mechanical Engineers.
Langston, J., Edrington, C., Poroseva, S. V., Steurer, M., & Vanli, O. A. (2009). Uncertainty Quantification in Response Surface Models in Parametric Analyses. In Proceedings of the International Simulation Multiconference: Grand Challenges in Modeling and Simulation Conference, Istanbul, Turkey (pp. 128-135). Istanbul, Turkey.
Tsai, C. -H., Zhang, C., Vanli, A., & Wang, B. (2009). Investigation of nanostructure effects and interactions on the elastic properties of buckypaper-polymer nanocomposites. In 2009 SAMPE Fall Technical Conference and Exhibition - Global Material Technology: Soaring to New Horizons. Wichita, KS: Society for the Advancement of Material and Process Engineering.
Vanli, O. A., Patel, N. S., Janakiram, M., & Del Castillo, E. (2007). Model Context Selection for Run to Run Control. In 19th Advanced Equipment Control/Advanced Process Control (AEC/APC) Symposium, Indian Wells, CA (pp. 145-148). Sematech. Retrieved from http://www.proceedings.com/04579.html

Nonrefereed Journal Articles
Vanli, O. A., Wang, B., & Rivero, I. (2013). Advances in nano-manufacturing: process repeatability, scalability and affordability for nano materials and manufacturing (Edited Special Issue). International Journal of Advanced Manufacturing Technology, 64 (1-3), 513-600. doi:10.1007/s00170-012-4646-6
Vanli, O. A., Zhang, C., & Wang, B. (2013). Product consistency and repeatability in the face of environmental variations. IE Magazine, 45(3), 52-53.

Presentations
Nonrefereed Presentations at Conferences
Giroux, R., Vanli, O. A., & Ozguven, E. E. (presented 2014, November). Spatiotemporal monitoring for Highway Safety. Presentation at INFORMS Annual Meeting, INFORMS, San Francisco, CA. (International)
Kocatepe, A., Ozguven, E. E., & Vanli, O. A. (presented 2014, November). A Capacity and Travel Time Reliability Analysis on Transportation Networks for Emergency Operations. Presentation at INFORMS Annual Meeting, INFORMS, San Francisco, CA. (International)
Mishra, S., & Vanli, O. A. (presented 2014, November). Condition Monitoring of Composites with Guided-wave Sensors. Presentation at INFORMS Annual Meeting, INFORMS, San Francisco, CA. (International)
Kwon, S. D., Alduse, B. P., Jung, S., & Vanli, O. A. (presented 2013, June). Bayesian Approach for Fatigue Damage Assessment of a Bridge under Gust. Presentation at 12th Americas Conference on Wind Engineering, American Society for Wind Engineering, Seattle, WA. (National)
Vanli, O. A. (presented 2013, April). A failure time prediction method for condition based maintenance. Presentation at INFORMS Annual Meeting, INFORMS, Minneapolis, MN. (International)
Vanli, O. A., Mishra, S., & Hardisty, J. (presented 2013, April). Damage Detection in Carbon Fiber Composites Using Principal Components Analysis. Presentation at National Council on Undergraduate Research Conference, April 2013, NCUR, University of Wisconsin, La Crosse, WI. (National)
Vanli, O. A., Wang, K., Zhang, C., Liang, R., & Wang, B. (presented 2012, October). Calibration and Adjustment of Nanomaterials Property Prediction Model Using Experimental Data. Presentation at INFORMS Annual Meeting, INFORMS, Phoenix, AZ. (International)
Vanli, O. A., & Jung, S. (presented 2012, October). Statistical Updating of Finite Element Model with Lamb Wave Sensing Data for Structural Damage Detection. Presentation at INFORMS Annual Meeting, INFORMS, Phoenix, AZ, Oct 2012. (International)
Jung, S., Vanli, O. A., & Kwon, S. D. (presented 2012, June). Wind Energy Potential Assessment Considering the Uncertainty in Wind Speed Data. Presentation at Engineering Mechanics Institute Conference, Engineering Mechanics Institute, Notre Dame, IN. (International)
Vanli, O. A., Zhang, C., & Wang, B. (presented 2012, May). An Adaptive Bayesian Approach for Robust Parameter Design with Observable Time Series Noise Factors. Presentation at Industrial and Systems Engineering Research Conference, Institute of Industrial Engineers, Orlando, FL. (International)
Vanli, O. A., Zhang, C., Nguyen, A., & Wang, B. (presented 2011, November). Sensor placement for Damage Detection in Composite Structures. Presentation at INFORMS Annual Conference, INFORMS, Charlotte, NC. (International)
Vanli, O. A., Chen, L. J., Zhang, C., & Wang, B. (presented 2011, May). A minimax sensor placement approach for structural health monitoring of composite structures. Presentation at IERC Conference,, Institute of Industrial Engineers, Reno, NV. (International)
Wang, K., Chen, L. J., Vanli, O. A., Zhang, C., & Wang, B. (presented 2011, May). Sonication Process Control for Uniform Mechanical Properties in Buckypaper Nanocomposites. Presentation at IERC Conference, Institute of Industrial Engineers, Reno, NV. (International)
Vanli, O. A., Zhang, C., Chen, L. J., Wang, K., & Wang, B. (presented 2009, October). A Bayesian Approach for Integration of Physical and Computer Experiments for Quality Improvement in Nanocomposite Manufacturing. Presentation at INFORMS Annual Conference, INFORMS, San Diego, CA. (International)

Invited Lectures and Readings of Original Work
Vanli, O. A. (2011, February). Statistical Methods for Modeling and Optimization of Material Processes. Delivered at Department of Chemical and Biomedical Engineering, FAMU-FSU College of Engineering. (Local)
Vanli, O. A. (2010, March). Efficient Statistical Methods for Manufacturing Process Optimization. Delivered at Department of Scientific Computing, FSU. (Local)
Vanli, O. A. (2009, October). Wind Turbine Reliability. Delivered at High Performance Materials Institute Seminar, FSU. (Local)
Vanli, O. A. (2009, January). Statistical Analysis in Engineering Design. Delivered at ngineering Advisory Council Meeting, FAMU-FSU College of Engineering. (Local)

Contracts and Grants
Contracts and Grants Funded
Ozguven, E. E. (PI), Vanli, O., Barrett, A., Moses, R., & Sando, T. (Jan 2015–Aug 2016). Travel Time and Roadway Capacity Reliability for an Aging Population: The Development of a Model Integrating Roadway Traffic with Aging Adults' Driving Behavior. Funded by US Dept. of Transportation-Center for Accessibility and Safety for an Aging Population. Total award $225,000.
Jung, Sungmoon (PI), & Vanli, Omer Arda (Co-PI). (Dec 2014–Aug 2016). Promoting Preventive Mitigations Of Buildings Against Hurricanes Through Enhanced Risk-Assessment And Decision-Making. Funded by University of Florida. (UFDSP00010509). Total award $200,000.
Liang, Zhiyong (PI), & Vanli, Omer Arda (Co-PI). (Oct 2013–Sep 2017). SNM: Roll-To-Roll Manufacturing of High Quality Bucky-Tape With Aligned and Crosslinked Carbon Nanotubes Through In-Line Sensing and Control. Funded by National Science Foundation. (1344672). Total award $1,465,059.
Vanli, Omer Arda (PI). (Apr 2013–Jul 2014). Collaborative Research: Multi-Accuracy Bayesian Models for Improving Property Prediction Nanotube Buckypaper Composities. Funded by Georgia Institute of Technology. (RD977-G1). Total award $6,796.
Okoli, Okenwa (PI), & Vanli, O. A. (Aug 2012–May 2013). SLS Aft Core Attach Strut. Funded by ATK Launch Systems. Total award $159,226.
Vanli, Omer Arda (PI), & Jung, S. (Apr 2012–Mar 2013). Reliability Assessment of Aging Structures Subject to Hurricanes Using Sensor-Based Condition Data. Funded by Florida State University/ CRC-Planning Grant. Total award $12,000.
Wang, Hsu-Pin (Co-PI), Okoli, Okenwa (PI), & Vanli, Omer Arda (Co-PI). (Sep 2010–Aug 2014). Development of a Triboluminescence and Photocatalysis Based System for Intrinsic Structural Health Monitoring. Funded by National Science Foundation. (0969413). Total award $300,000.
Zhang, Chun (PI), Wang, Hsu-Pin (Co-PI), & Vanli, Omer Arda (Co-PI). (Aug 2010–Jul 2013). Collaborative Research: Multi-Accuracy Bayesian Models for Improving Property Prediction of Nanotube Buckypaper Composites. Funded by National Science Foundation. (1000099). Total award $219,767.
Zhang, Chun (Co-PI), Wang, Hsu-Pin (Co-PI), Okoli, Okenwa (PI), Pignatiello, Joseph J (Co-PI), Liang, Zhiyong (Co-PI), Zeng, Changchun (Co-PI), Liu, Tao (Co-PI), Zhang, Mei (Co-PI), & Vanli, Omer Arda (Co-PI). (Jul 2010–Jun 2014). REU Site: Non Participant Support -- Retaining Engineers through Research Entrepreneurship and Advanced - Materials Training. Funded by National Science Foundation. (1005016). Total award $327,969.
Okoli, Okenwa O (PI), Wang, Hsu-Pin, & Vanli, O. A. (May 2010–Apr 2013). Development of a Triboluminescence and Photocatalysis Based System for Intrinsic Structural Health Monitoring. Funded by National Science Foundation - CMMI Sensors and Sensing Systems. (0969413). Total award $403,762.
Vanli, O. A. (Jun 2009–Aug 2009). Robust Design and Control of Nano-manufacturing Processes. Funded by Florida State University. Total award $16,000.

Contracts and Grants Pending
Sobanjo, John O (Co-PI), Harvey, Bruce A (Co-PI), Moses, Ren (Co-PI), AbdelRazig, Yassir A (PI), Boot, Walter (Co-PI), Vanli, Omer Arda (Co-PI), & Ozguven, Eren Erman (Co-PI). (Jan 2014). Enhancing Airport Wayfinding for the Elderly and Persons with Disabilities. Submitted to Transportation Research Board.

Service
Florida State University
FSU College Service
Member, Information and Technology Committee, COE (2012–present).
Member, Council of Student Affairs and Curriculum, COE (2010–present).

FSU Department Service
Director of Graduate Studies, Graduate Program, IME Department (2012–present).
Faculty Advisor, Alpha Pi Mu, Honors Student Association (2010–present).
Member, Graduate Admissions Committee, IME Dept (2009–2012).
Member, Faculty Search Committee for new faculty hiring, IME Dept (2011).

The Profession
Guest Editing for Refereed Journals
Vanli, O. A., Wang, B., & Rivero, I. (Eds.). (2013). Advances in nano-manufacturing: process repeatability, scalability and affordability for nano materials and manufacturing [Special Issue]. International Journal of Advanced Manufacturing Technology, 64.

Editorial Board Membership(s)
Journal of Quality Technology (2008–2012).

Guest Reviewer for Refereed Journals
IEEE Transactions of Semiconductor Manufacturing (Sep 2008–present).
Industrial Journal of Production Research (Sep 2008–present).
Institute of Industrial Engineers (IIE) Transactions (Sep 2008–present).
Journal of Statistical Planning and Inference (Sep 2008–present).
Quality and Reliability Engineering International (Sep 2008–present).
Technometrics (Aug 2008–present).

Chair of a Symposium
Vanli, O. A. (Chair). (2013, October). Quality, Statistics and Reliability Track, Condition Monitoring and Prognostics Session, INFORMS Annual Meeting. Symposium conducted at the meeting of INFORMS, Minneapolis, MN.
Vanli, O. A. (Chair). (2009, May). Quality Control and Reliability Engineering Track, Industrial Engineering Research Conference. Symposium conducted at the meeting of Institute of Industrial Engineers, Miami, FL.

Reviewer or Panelist for Grant Applications
U.S. Department of Energy, SBIR/STTR Remote Wind Sensor Development (2011).
NSF, CMMI Division, Manufacturing Enterprise Systems Program (2010).
NSF, CMMI Division, Manufacturing Enterprise Systems Program (2010).

Workshop Participation
Vanli, O. A. (2009). Wind Turbine Reliability Workshop, Albuquerque, NM. Sandia National Laboratory.