Title : Numerical Simulation Of Heat And Mass Transfer Effects On Moving Vertical Plate In The Presence Of Magnetic Field
Approved & Ongoing Proposal
Funding Agency : DRDO
Principal Investigator : Dr G Sumathi,
Professor & HoD/IT
Sanctioned Amount : Rs. 4.55 Lakhs
Title : A Frame work for Resource Monitoring & Fault Tolerant Scheduling in Heterogeneous Computation Grids.
Grants fetched
---
Departmental Achievements
a) IBM and SVCE have signed MoU and IBM had set-up a Centre of Excellence in IT department Laboratory. Students of circuit branches will be trained in IBM DB 2 and will be given IBM International Certification.
b) Faculty paper publications in Journals:
National: 1
International: 14
c) Faculty paper presentations in conferences:
National: 8
International: 12
d) R. Sindhuja, and P. Varsha, students of final year IT department bagged the "Best Paper Award" for the paper "ID Based Entitled Verifier Cryptography for Grid Systems" presented in the 4th ICEMC2 conference, PESSE Bangalore. The paper, which dealt with ID based cryptography for grid systems, was completed under the guidance of Dr. G. Sumathi, Prof & HOD, IT. The conference was sponsored by PESIT and co-sponsored by ISRO and Microsoft Research. 3) The students of this department have secured very good placements in various high profile companies. Our alumni who have gone on to distinguished careers as innovators in industry, living and working throughout the world, still have corporate and personal ties with the College through recruitment, mentoring, guest lectures, and other interactions.
Distinguished Alumni
Harshana .H – Working in M/s. Ericsson India Ltd.,
Sujitha N.K. – Working in M/s. Ericsson India Ltd.,
Department has recognized as research center by Anna university and Annamalai University. Faculties are pursuing their doctoral courses in Mechanical Engineering Department.
Foreign Collaborations, if any
One faculty is doing his research work collaborated with foreign university(University of Aveiro, Portugal) professor and published papers in referred journals
Professional Society Memberships
ISTE, IE (I), ISTD, SAE, CIPET and MMA
Professional activities
Society of Mechanical Engineers (SME),Society of Automotive Engineers (SAE) activities, conducting Short term/Long term courses, Organizing National / International Conference / Symposium / Workshops
Professional activities during the academic year 2010- 2011 Workshop Conducted – 1
Workshop/Conference/Short term course attended – 30
Research Publications in referred journals – 9
Conference Publications - 12
Guest Lectures Arranged – 09
Industrial Visits – 11
In – Plant Training - 43
Student’s Paper Presentation – 30
Consultancy activities
Year
Project Title
Amount Received/
Spent
Funding Agency
Name of the Faculty
2006-2007
Mathematical Modeling of Reciprocating Compressors-NLC-I
1,00000
M/s Sundaram Clayton Ltd., Chennai
Dr.TVBalasubramanian
Mr.J.Venatesan and Mr.R.Murugan
2007-2008
Mathematical Modeling of Reciprocating Compressors-NLC-II
1,37,000
M/s WABCO-TVS Ltd., Chennai
2009-2010
Mathematical Modeling of Reciprocating Compressors-NLC-II-Phase II
Department has received grant for Rs.3.5 Lakhs from AICTE under (RPS) scheme for a research project titled “Experimental investigation and ANN modeling of Al-SiC (10p) Metal Matrix Composites machining using PCD inserts for a duration of 3 years (2009 -2012). Dr. N.Muthukrishnan, Professor in Mechanical Engineering department is acting as a Principal investigator for this project and Mr.R.Ramanujam, Senior Lecturer is the Co – Investigator.
Departmental Achievements
(i) Department is accredited for five years consecutively for 3 times from 1998 Approved Ph D Guides by the Anna University of Technology 1.Dr.N.Nallusamy
2.Dr.R.Ramesh
3.Dr.K.Pitchandi
University Rank Holders - 4 (2005-2009 Batch)
2 (2006-2010 Batch)
(i) Prize won by the Students in Paper Presentation
2010
2009
2008
3
5
4
(ii) M. Balaji (II M.E (CAD) student), participated and won best paper award for the paper titled "Analysis of sliding behaviour of non conformal contacting surfaces subjected to shear traction" at Golden jubilee National Conference on Advances in Mechanical Engineering (AIM ENGG 2011) organized by the Department of Mechanical & Manufacturing Engineering, Manipal Institute of Technology, from 3 - 5 January 2011. The student was fully sponspored by SVCE
(iii) Varun .D (Third year student), was sponsored to present a paper titled "A comparative study of Mechanical Characterization of Carbon fabric - epoxy and Carbon fabric - polypropylene matrix composites" in 3rd International conference on Recent Advances in Composite Materials, held at Limoges, France during 13-15 Dec.
(iv) Sathish Pandian .R (Final year student), won Best Paper award and presented a paper titled "Simulation and performance study of 3-DOF parallel manipultor units" in International conference on Emerging Trends in Robotics and Communication Technologies, held at Sathyabama university, Chennai during 3-5 December.
(v) Varun .D (third year student), won the first place and best design award at the "Wright Design" contest held at IIT Madras.
(vi) Lakshmi Narayanan .T (final year student), was sponsored to present a paper titled "Investigation of thrust, torque, delamination on drilling of glass fabric/polypropylene matrix composite" in the International Conference on Mechanical & Electrical energy, IEEE, held at Singapore.
(vii)K.A.Anant and Abhinav Ramesh (third year students) was sponsored to present a paper titled "Performance evaluation of Manganese Phosphate coating on High Carbon High Chromium AISI D2 Steel" at the "7th International Material Technology Conference and Exhibiion" held at HELTON Kuching, Malayasia during June 12 - 16.
(viii) Kiran Paul .J of IV year was sponsored to present a paper titled “Performance study of latent heat TES system Integrated with natural circulating solar water heating unit using helical type heat exchangers” in the International conference on sustainable energy technology, 31st Aug – 3rd Sep, 2009, Aachen, Germany.
(ix) Shyam sundar of IV year was sponsored to present a paper titled “Emission and Performance characteristics of direct injection diesel engine fuelled with blended moringa olerifera oil”, in the SAE International (SAE 2009)- Powe trains Fuel and Lubricants meeting, June 15-17, 2009, Forence, Italy.
(iv) Venkatesh R. of IV year presented a paper titled “Machinability studies of Al/Sic/MMC using PCD insert tool (1300 grade)” in the International conference of Mechanical Engineering,-2009, London, U.K., 1-3, July, 2009.
(v) Vijaya padmaraja of III year student (2008) was sponsored to present a paper titled “Comparative study of sensible and latent heat storage system integrated with solar water heating system”, in the International Conference on Renewable Energy and Power quality-2008, March 12-14, 2008,Santander, Spain.
SPORTS:
N. Naresh (captain), A. Vishal, V. Nitish (final year students), Abinav & Haresh (third year students) are represented college football team from the department and secured Second Position (Runners up) in the Anna University Zonal level Football tournament.
Distinguished Alumni
1. Mr. John Praveen John - CTS Private Limited
2. Mr. Sai Kishan - Research scholar , IISC Bangalore
3. Mr. Palaniappan - Entrepreneur
Name of the Department
MARINE ENGINEERING
Course
BACHELOR OF ENGINEERING
Level
UG
1st year if approval by the council
July 1998
2010-11
2009-10
2008-09
Year wise sanctioned Intake
30
30
30
Year wise Actual Admissions
28
27+3*
23
Cut off marks-General quota
182.50
185
182.75
% Students passed with First Class
NA
95.83
97.44
Students Placed
06
14
28
Average Pay package, Rs./Year
5 Lakh
5 Lakh
5 Lakh
Students opted for Higher Studies
-
-
-
Accreditation Status of the course
Accredited / Provisionally Accredited / Not Accredited / Noteligible yet
Doctoral Courses
-
Foreign Collaborations, if any
-
Professional Society Memberships
Indian Society for Technical Education (ISTE), New Delhi
Indian Society for Technical Development (ISTD)
Madras Management Association (MMA)
Institution of Engineers (India), IE(I)
Professional activities
Marine Engineering Students Association- Guest lectures, Industrial Visits, Students Symposium, In plant training
Consultancy activities
-
Grants fetched
-
Departmental Achievements
100 % placement to eligible students arranged by the department
