R4-021514 Addition of Repeater configuration (CR 015 to 25.143 Rel-4) (Mikom/ Allgon)
Han van Bussel (T-Mobile) commented that the use of "must" should be replaced by "shall" according to the drafting rules
Decision: The CR is revised
R4-021680 Addition of Repeater configuration (CR 015r1 to 25.143 Rel-4) (Mikom/ Allgon)
R4-021681 Addition of Repeater configuration (CR 016r1 to 25.143 Rel-5) (Mikom/ Allgon)
Decision: The CRs are agreed
R4-021516 Definition of the power to select the right table for the spectrum emission mask requirement. (CR 017 to 25.143 Rel-4) (Mikom/ Allgon)
R4-021517 Definition of the power to select the right table for the spectrum emission mask requirement. (CR 018 to 25.143 Rel-5) (Mikom/ Allgon)
Decision: The CRs are agreed
R4-021519 EVM Test: Change requirement for the use of HSDPA. (CR 019 to 25.143 Rel-5) (Mikom/ Allgon)
A Rel-4 CR is required, see R4-021518. It was commented that a 16QAM should be used for the EVM test, like test model 5 was introduced in the BS specification for the EVM test with 16QAM. It was discussed what the impact of the modulation would be on the test. Mikom agreed to add the reference to test case 5 in the repeaters specification, since the type of modulation of the signal is established in the test model.
Decision: The CR is agreed
R4-021682 EVM Test: Change requirement for the use of HSDPA. (CR 27 to 25.143 Rel-4) (Mikom/ Allgon)
Decision: The CR is agreed
R4-021520 EVM Test: Change from Test Model 4 to Test Model 1 (CR 020 to 25.143 Rel-5) (Mikom/ Allgon)
It was agreed to in the previous discussion to introduce test model 5 for this test in the future, so the need of this CR is unclear. Johan Skold (Ericsson) noted that test model 5 is only used in Release 5 for the BS.
Decision: The CR is agreed
R4-021685 EVM Test: Change from Test Model 4 to Test Model 1 (CR 28 to 25.143 Rel-4) (Mikom/ Allgon)
Decision: The CR is agreed
On the EVM test discussion, Michael Jeck (Ericsson) reminded that may be in the future the test case to be used will need to be revised.
R4-021523 Input intermodulation: Correction of co-location and addition of co-existence (CR 021 to 25.143 Rel-4) (Mikom/ Allgon)
See R4-021521.
Decision: The CR is revised
R4-021683 Input intermodulation: Correction of co-location and addition of co-existence (CR 021r1 to 25.143 Rel-4) (Mikom/ Allgon)
R4-021684 Input intermodulation: Correction of co-location and addition of co-existence (CR 022r1 to 25.143 Rel-5) (Mikom/ Allgon)
Decision: The CRs are agreed
R4-021527 Spurious emission: correction of the procedure (CR 023 to 25.143 Rel-4) (Mikom/ Allgon)
R4-021528 Spurious emission: correction of the procedure (CR 024 to 25.143 Rel-5) (Mikom/ Allgon)
No comments
Decision: The CRs are agreed
R4-021584 Out of band gain (CR 025 to 25.143 Rel-4) (Mikom/ Allgon)
R4-021585 Out of band gain (CR 026 to 25.143 Rel-5) (Mikom/ Allgon)
No comments
Decision: The CRs are agreed
Dostları ilə paylaş: |