Ednesday, 9 June Session 3a 900 Keynote

Session 12a

11²⁰

Use of Titanium as Material of Construction for Improved Performance of Pumps in Seawater Applications

Annemette Riis, Jacob Dirks, Grundfos a/s, Denmark

Corrosion Resistant Behaviour of Ti-31 Alloy for Marine Application in Seawater

Hu Yaojun, Liu Guozong, Chen Jun, North-west Institute for Non-ferrous Metal Research, China

Designing Peculiarities of Power Equipment Details of Titanium Alloys

V. Travin, L. Lysenco, "Kaluga Turbine Works" J.S.C., Russia

Alloys of Titanium in Comparison with Other Propeller Alloys for High-Speed Vessels

S.S. Ushkov, Yu.A. Filin, CRISM "Prometey", Russia

Life Time of Castings Made of Titanium Alloys in Sea water

S.S. Ushkov, Yu.A. Filin, N. F. Molchanova, CRISM "Prometey", Russia

Development of a Titanium Alloy and a Production Process for Tubes Used in Seashelf Oil and Gas Production

V.V. Tetyukhin, V.G. Smirnov, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

A.A. Fedorov, A.V. Safianov, ChTPZ, Russia

Wednesday, 9 June

Session 5f, 6f; Poster Symposium 6

14⁴⁰ – 18⁰⁰

About Experience of Designing Submarines and Deep Submersible Vehicles Made of Titanium Alloys in SPMBM "Malachite"

V.V. Krilov, U.K. Mineev, SPMBM "Malahite", St.-Petersburg, Russia

Symposium 7

Transport, Power Engineering, Medical and Other Applications

Thursday, 10 June
Session 9b

14⁴⁰
Keynote

Potential of Titanium for Automotive Application

Rainer Rauh, Hartmut Baur, Daimler Chrysler AG Research and Technology, Germany
Corrosion Resistance, Mechanical Properties, Corrosion Fatigue Strength and Biocompatibility of New Ti Alloys without Al and V for Medical Implants

Yoshimasa Ito, Titanium Metals Technology Department, KOBE STEEL, Ltd, Japan

Yoshimitsu Okazaki, Mechanical Engineering Laboratory, Agency of Science & Technology, Japan
Mechanical Properties, Microstructure and Fracture Micromechanisms of Neutron Irradiatiated Titanium -Alloys

I.I. Yarmolovich, O.A. Kozhevnikov, E.V. Nesterova, V.V. Rybin, CRISM "Prometey", Russia

The Size of Titanium Market in Future

Takashi Nishimura, NTC Corporation for Titanium Kobe, Japan

Session 10b

17⁰⁰

The Mechanical and Ballistic Properties of an Electron Beam Single Melt of Ti-6Al-4V Plate

Martin G.H. Wells, Army Research Laboratiry Weapons and Materials Research Directorate, USA

John Fanning, Matthew S.Burkins, Brian T. Pothier, Tutanium Metals Corp., USA

Brij Roopchand, U.S. Army Tank-Automotive Research, Development and Engineering Center, USA
Ballistic Evaluation of TIMETAL 6-4 Plate for Protection Against Armor Piercing Ammunition

J.C. Fanning, TIMET Henderson Technical Lab., USA

An Experience of Titanium Use for Manufacture of Gas-Purifying Equipment and Smoke Stacks

V.V. Tetyukhin, S.V. Ananyev, Y.E Shashkova , JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

O.P. Kotchetkov, "KOTCH", Republic Kazakhstan
Thinner Gage Titanium Tubes

Yoshimasa Ito, Yoshiyuki Miyamoto, Kobe Steel, Ltd, Japan

Eiichi Susuki, Kobe Special Tube, CO., Ltd, Japan
Experimental Approbation of Home-Made Intravascular Stents on Titanium Alloy Base

Shevchenko Yu.L., Belevitin A.B., Erofeev A.A., Military Medical Academy, St.Petersburg, Russia

Effect of Zr Addition on Mechanical Properties and Microstructure of Ti-Zr Alloy

Atsuhiko Kuroda, Sumitomo Metal Ind. Ltd., Jouetsu Niigata, Japan

Yoouichi Imamura, Sumitomo Metal Ind. Ltd., Amagasaki Hyogo, Japan
Friday, 11 June

Session 11b

9⁰⁰

Tailored Composite Titanium-Based Biomaterials

J. Breme, V. Biehl, T. Wack, E. Eisenbarth, Universitat des Saarlandes, Germany

Mechanical Performance of Newly Developed -Type Titanium Alloys for Biomedical Use

Mitsuo Niinomii, Department of Production Systems Engineering, Toyhashi Univ. of Tech., Japam

D. Kuroda, Graduate Student of Toyhashi Univ. of Tech., Japan

Yo. Kato, T. Yashiro, Market Development Department, Daido Steel Co. Ltd., Japan

Electronic Structure Simulation of Modulus and Strength of Ternary -Type Bio-Titanium Alloys

Y. Song, D.S. Xu, R. Yang, D. Li , Institute of Metal Research, Chinese Academy of Sciences, China

Y. Song, W.T. Wu, State Key Laboratory for Corrosion and Protection, Institute of Corrosion and Protection of Metals, China

Z.X. Guo, Department of Materials, Queen Mary & Westfield College, University of London, UK

Osteoblast-Like Cell Response to C.P. Titanium Implants Blasted with Different Particles

F.J. Gil, C. Aparicio, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, University Politechnique of Catalonia, Spain

C. Peraire, CIDASAL, Spain

A. Padros, Clinica Pad. Barselona, Spain

Prospects of Titanium Alloys Application in Structures of Joint Endoprothesis

A.A. Ilyin, S.V. Scvortsova, MATI-Russian State Technology University after Tsiolkovsky K.E., Russia

N.V. Zagorodny, Russian University of People’s Friendship, Russia

V.N. Karpov , CJSC “Implant-MT”, Russia

Application of Titanium and Titanium Alloys in Dental Implantology

D.V. Tetyukhin, E.N. Kozlov, "Comnet", Russia

Wednesday, 9 June

Session 5f, 6f; Poster Symposium 7

14⁴⁰ – 18⁰⁰

Development of Porous Products from Spherical Titanium Powders and Application in Medicine

K.E. Belyavin, D.V. Min’ko, Powder Metallurgy Research Institute with Pilot Plant, Minsk, Republic of Belarus

Corrosion and Metallic Ion Release in Titanium Dental Implants Coupled to Different Alloys Used in Dentistry

F.J. Gil, D. Rodriguez, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, University Politechnique of Catalonia, Spain

Comparison between the Mechanical Behaviour of Ti-Ni and Ti-Ni-Cu Shape Memory Alloys Used for Orthodontic Applications

F.J. Gil, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, University Politechnique of Catalonia, Spain

The Effect of Oxygen Content on the Mechanical and Ballistic Properties of Ti-6Al-4V Plate

Martin G.H. Wells, Matthew S.Burkins, Weapons and Materials Research Directorate, USA

William W. Love, RMI Titanium Company, USA
New Technologies of Titanium Alloys Treatment for Application in Structures of Joint Endoprothesis

A. Ilyin, Zagorodny N.V., Karpov V.N., Skvortsova S.V., MATI-Russian State Technology University, Russia

Characteristic Properties of Production and Application of Titanium Nickelide Implants with Shape Memory Effect

A.A. Ilyin, S.V. Scvortsova, M.Y. Kollerov, MATI-Russian State Technology University after Tsiolkovsky K.E., Russia

E.A. Davydov, Russian Scientific Research Neurosurgical Institute named after Polenov A.L., Russia

R. Gazzani , Implan, Italy

Investigation of the intermetallic Ti-Al-V alloys radiation erosion

V.L. Yakushin, B.A. Kalin, N.V. Volkov, A.V. Shul’ga, V.T. Fedotov, A.N. Pluschev, A.V. Mitrofanov, A. E. Grigoriev, Moscow State Engineering Physics Institute (Technical University), Department of Physical Problems of Material Science.

Application of Titanium Alloys in Manufacture of High-Temperature Stop Valves for Thermal Power Station

V.A. Kutsankin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

M.K. Smyslova, A.F. Ivakin, GNPP "Motor", Russia
Development of a Production Process for Manufacture of CP Titanium Bars for Implant, and Experience of Their Application

V.S. Dushin, V.G. Korobshikov, I.V. Levin, Kurochkina L.G., JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

K.M. Scherepo, UNTO, Russia

N.A. Iofis, “Electron”, Russia

Metal Structures in Titanium for Immersion Osteosynthesis

D.V. Tetyukhin, E.N. Kozlov, "Comnet", Russia

Manufacture of Heat Exchangers at VSMPO

V.V. Tetykhin, N.V. Shinnikov, V.I. Ustinov, L.I. Nelaev, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Titanium Devices and Structures for External Osteosynthesis

D.V. Tetykhin, E.N. Kozlov, "Comnet", Russia

Fracture Сharacteristics of Ddental Precision Castings of Pure Titanium and Ti-6Al-4V

Hisao Fukui, Jiro Hasegawa, Department of Dental Material Science, School of Dentistry, Aichi-Gakuin University, Japan

Kiyoharu Narita, Graduate Student of Aichi-Gakuin University, Japan

Mitsuo Niinomi, Kei-ichi Fukunaga, Department of Production Systems Engineering, Toyohashi University of Technology, Japan

Shiro Takahashi, Graduate Student of Toyohashi University of Technology, Japan
Surgical Instrument with Titanium Nitride Dusting

Shevchenko Yu.L., Belevitin A.B., Shaidakov E.V., Military Medical Academy, St.Petersburg, Russia

Vascular Stenst - “Prometey” (Experimental Study)

Shevchenko Yu.L., Belevitin A.B., Erofeev A.A., Military Medical Academy, St.Petersburg, Russia

The Recurrent Neural Networks Architectures and Adaptive Training Algorothms for Time Series Prediction

Theodore Laopoulos, Aristotle University of Thessaloniki, Department of Physics, Laboratory of Electronics, Aristotle University Campus, Greece

Vladimir Golovko , Jury Savitsky , Brest Polytechnic Institute, Department of Computers, Neural Network Group, Republic of Belarus

Anatoly Sachenko, Ternopil Academy of National Economy, Institute of Computer Information Tehnologies, Laboratory of Automated Systems and Networks, Ukraine

Lucio Grandinetti, University of Calabria, Department of Electronics, Informatics and Systems, Parallel Computing Laboratory, Contrada Arcavacata, Italy
Evaluation of TIMETAL®15-3 Sheet for Sharp Implement Thrust Protection

J.C. Fanning, TIMET Henderson Technical Lab., USA

Titanium Alloys for Application in Rehabilitation Facilities

I.V. Tetyuhkhin, “Conmet”, Russia

Application of titanium and titanium alloys in dental implantology

E.N. Kozlov, I.V. Tetyuhkhin, “Conmet”, Russia

Symposium 8

Raw Materials, Sponge Production, Melting and Recycling

Wednesday, 9 June
Session 3e

9⁰⁰

Keynote

Research Activities on Cost Effective Metallurgy of Titanium Alloys in Japan

Yoshikuni Kawabe, Chiba Institute of Technology, Japan
Titanium Raw Materials of the Kola Peninsula-Outlooks for Utilization

V.T. Kalinnikov, A.I. Nikolaev, I.V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Science Centre RAS, Russia

Outlook for Titania Slag Production in CIS Countries

V.V. Telin, Zaporozhye Titanium & Magnesium Plant, Ukraine

A.N. Petrunko , V.P. Pechenkin, Titanium Institute, Ukraine
Improvement of the Process and Apparatus in Production of Titanium Tetrachloride

A.I. Gulyakin, V.I. Mukliev, I.A. Karimov, Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia

Study on Mathematic Modelling of Fluidized Bed without Perforated-Plate for Producing TiCl₄ and its Industrial Applications

Wangguang Wen, Guangzhou Research Institute of Non-ferrous Metals, China

Session 4e

11²⁰

Technical Re-Equipment of Zaporozhye Titanium and Magnesium Plant on the Basis of Improved Metallothermal Equipment

V.V. Telin, V.P. Murashov, V.N. Slivin, Zaporozhye Titanium & Magnesium Plant, Ukraine

A.N. Petrunko, N.A. Pampushko, A.E. Andreev, G.N. Tereshenkov , Titanium Institute, Ukraine
Technology of Titanium Shavings Sriquetting

K.B. Abramova, S.D.SamujIov, Ioffe Institute, Russia

Yu.A. Filin, CRISM "Prometey", Russia
Production of Titanium Sponge Ingots with Increased Chlorine Content

A.N. Petrunko, A.E. Andreev , A.Ya. Deinega, Titanium Institute, Ukraine

V. V.Telin, , L.Ya. Shvartsman , Zaporozhye Titanium & Magnesium Plant Ukraine

Yu.V. Latash, I.V. Sheiko, V.S. Konstantinov, M.L. Zhadkevich, E.O. Paton Electrical Welding Institute, Ukraine

Investigation on Reduction of the Nitride Inclusions in Titanium Sponge

O.A.Putina, A.A.Putin, A.I.Gulayakin, N.P.Belokopytov, A.A.Zinina, D.A.Rymkevich

Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia

Public Joint-stock Company “AVISMA” Titanium and Magnesium Works, Russia

Private Joint-stock Company “Baltic Stainless Steel”, Russia
Development of Processes for Titanium Sponge Grinding

A.N. Petrunko, A.E. Andreev , G.A. Narushin, Titanium Institute, Ukraine

V. V.Telin., V.P. Murashov , A. P. Egorov, Zaporozhye Titanium & Magnesium Plant, Ukraine
Spectrophotometric Check of the Presence of Surfage Defects on Titanium Sponge Pieces

Yu.S Levin, A.E. Andreev, L.G. Terekhova, Titanium Institute, Ukraine

V.V. Telin, A.I. Semyonov , Zaporozhye Titanium & Magnesium Plant, Ukraine

Session 5e

14⁴⁰

A Novel Technique to Recovery Titanium Compound from Metallurgical Slags

Zhitong Sui, Taiping Lou, Yuhai Li, Nianxin Fu, Guangqiang Li, Zhida Sui, School of Materials and Metallurgy Northeastrn University, China

Magnesium-Thermal Process of Spongy Ti-Nb Alloys and Their Application

A.A. Putin, O.A. Putina, P.G. Detkov, A.V. Chub, A.A. Zinina,

Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia

Public Joint-stock Company “Solikamsk Magnesium Work”, Russia

Investigation of Producing Processes of Both Carbides and Nitrides of Titanium by Magniethermic Reduction Chlorides

S.V. Aleksandrovskij, V.M. Sizjakov, A.H. Ratner, M.B. Geilikman, St.Petersburg State Mining Institute, Russia

Casting of Titanium Slabs in the Scull Furnace

V.N. Chubarov, I.S. Polkin, All-Russia Institute of Light Alloys, Russia

Development of Macrostructure in Titanium and Titanium Alloys in Gots under Different Conditions

A.Sh. Fridman, M.I. Musatov, All-Russia Institute of Light Alloys, Russia

Refining of Ti Alloys Using Arc Hearth Furnace

M. Musatov, All-Russia Institute of Light Alloys, Russia

V.V. Tetyukhin, P.S. Altman, V.V. Saveliev, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia
Session 6e

17⁰⁰

Electron Beam Melting of Titanium

Paton B.E., Trigub N.P. , E.O. Paton Electric Welding Institute, Ukraine

ESR for Titanium: Yesterday. Today. Tomorrow

B.E. Paton, B.I. Medovar,M. Benz, L.B. Medovar, E.O. Paton Electric Welding Institute, Ukraine

M.G. Benz, GE Corporate Research & Development , USA

L.B. Medovar, Lev, ELMET-ROLL, Ukraine

Use of Electron Beam Skull Melting with Electromagnetic Stirring of Melt for the Titanium Alloy Castings Production

S. Ladokhin, A. Koshelap, N. Levitskiy, Physico-Technological Institute of Metals and Alloys of NAS, Ukraine

A New Electron Beam Titanium-Sponge Melting Furnace for the Production of CP-Titanium Ingots

M. Blum, U.Biedricher, A. Choudhury , ALD Vacuum Technologies GmbH, Germany

Electron Beam Cold Hearts Remelting of Titanium Alloys

N. K. Lashyk, V.N. Fedorov, V.A. Schekin-Krotov, Private-Joint Stock Company "FIKO", Ukraine

V.I. Trefilov, V.N. Minakov, N.V. Minakov, Institute for Problem of Material Science National Academy of Science, Ukraine
Electric-Slag Smelting with Magnetic Control (MEM)

Ya.Yu. Kompan , E.O. Paton Institute of Electric Welding, Ukraine

V.I. Trefilov, V.N. Minakov , Institute for Problem of Material Science National Academy of Science, Ukraine

Thursday, 10 June
Session 7e

9⁰⁰

Direct Oxygen Removal and Anticontamination Treatment of Titanium

Toru H. Okabe, Yoshiaki Umetsu, Institute for Advanced Materials Processing, Tohoku University, Japan

High and Low Density Inclusions in Titanium Alloys: Their Formation and Dissolution

P.S. Garratt, D.F.Neal , Timet UK (Research and Development), UK
Ebed Ti Alloys.

L.M. Bianchi, Metvac Inc.,USA

Microstructural Chracterization and Reaction Mechanisms of the Interface between Titanium and Zirconia

Kun-Fung Lin, Chien-Cheng Lin , Department of Materials Science and Engineering in National Chiao Tung University, Taiwan

K.Y. Niel, Y.L. Lin, C.P. Chang, Chung-Shang Institute of Science & Technology, Taiwan
Production of Low Cost -TiAl Valves for Automobiles of Next Generation

A. Choudhury, M. Blum, H.Scholz, G.Jarczyk, ALD Vacuum Technologies GmbH, Germany

P. Busse, ACCESSe,V., Germany
The use of Mathematical Models to Determine Parameters Minimizing the Volatilization Losses in the Electron Beam Melting Process

J.P. Bellot, H. Duval, M. Ritchie, D. Ablitzer, Laboratoire de Science et Genie des Materiaux Metalliques, France

Wednesday , 9 June

14⁴⁰-18⁰⁰

Session 5h, 6h

and

Thursday, 10 June

9⁰⁰-13²⁰

Session 7h, 8h; Poster symposium 8
Obtainment of Titanium Dioxide during Integrated Processing of Titanium Magnetites from Coastal and Shelf Deposits

Z.I. Alizadeh, Institute of Inorganic and Physical Chemistry of the Azerbaijan Academy of Science, Azerbaijan Republic

Distribution of Radionuclides of the Uranium and Thorium Series in the Process of the Ore Thermal Smelting

S.M. Grashchenko , Z.G. Gritchenko, L.V. Shishkunova, D.S. Abramov, V.V. Bulatov,

Yu.P. Kudryavskii. Yu.F. Trapeznikov, V.G. Khlopin Radium Institute, Russia
The Behaviour of Titanium Dioxide in the Slag Melts

I.Yu. Archakov, S.I. Shornicov, A.I. Ishkildin, T.Yu. Tchemekova, M.M. Shultz, Institute of Silicate Chemistry, RAS, Russia

Thermodynamic Properties of the Melts, Containing Titanium Dioxide

S.I. Shornicov, I.Yu. Archakov, A.I. Ishkildin, M.M. Shultz, Institute of Silicate Chemistry, RAS, Russia

The Design Optimization of Gas-Lift Chlorinator for Chlorination of the Titaniferous Raw Material in the Chlorides Melt

I.A. Karimov, V.I. Mukliev, Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia

Investigatuons on Improvement of the Titanium Sponge Production

S.V. Ogurtsov, Federal Scientific Centre “GIREDMET”, Russia

O. A. Putina, A.A. Putin, Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia
About Question of Residual Chlorine Nature in Spongy Titanium

S.V. Aleksandrovskij, St.-Petersburg State Mining Institute, Russia

Testing of Pilot Samples with Gasdynamic Coatings under Conditions of Titanium Sponge Production

N.P. Nechaev, A.I.Kashirin, A.V.Shalamov, D.A. Rymkevich, S.M. Shitov

Public Joint-stock Company “Russian Research and Design Institute of Titanium and Magnesium” (RITM), Russia

Public Joint-stock Company “AVISMA” Titanium and Magnesium Works, Russia

Study the Possibility of Ferrotitanium Production from Ilmenite Concentrate in Esr Furnance

V. M. Sokolov, Yu. N. Voytenkov, V.D. Babyuk, Physico-Technological Institute of Metals and Alloys of NASU, Ukraine

V.G Lysenko, Institute of Titanium, Ukraine
Titanium Scraps as an Initial Material for Ingots Melting

O.M. Shapovalova, T.I.Ivchenko, H.P.Babenko, H.V.Dolzhenkova, S.V.Suslenkova,I.A.Markova, Dniepropetrovsk State University, Ukraine

The Morphology of Crystallization Front and Its Effect on Structure Formation and Ingot Composition of Pseudo-Alpha-Titanium Alloys Produced by Vacuum ARC Remelting Process

S.S. Ushkov, Ed. A. Karasyev, A.S. Koudriavtsev, CRISM "Prometey", Russia

Peculiarities of Process of Magnetically-Controlled Electroslag Melting (MEM) of Titanium Alloys

Ya.Yu. Kompan, I.V.Protokovilov, E.O. Paton Electric Welding Institute, Ukraine

"Active Slag" ESR Refining of Titanium Alloys for Dissolution of Nitrogen-Rich Inclusions

A.D. Riabtsev, O.V.Tarlov, V.V. Pashinsky, ECON at Donetsk State Technical University, Ukraine

M.G. Benz, L.C.Perocchi, GE Corporate Research & Development, USA

V.N. Radchenko, Latrobe Steel Company, Latrobe, PA 15650-0031, USA

Development of Production Technology of the Secondary Titanium Alloys and Manufacturing Parts from Them

A.V.Sverdlin, Bradley University, USA

A.N. Treschevsky, V.V. Vikhman, A.A. Kosilov, Russia
Modification of Ti and Ti-Based Alloys Structure at the Electron Beam Skull Melting

A.V. Koshelap, Physico-Technological Institute of Metals and Alloys of NASU, Ukraine

Titanium Production by Magnesiothermic Reduction of TiCI₄ through an Electronically Mediated Reaction (EMR)

Tetsuya Uda, Toru H. Okabe, Yoshio Waseda, Center for Metallurgical Process Engineering, Institute for Advanced Materials Processing, Tohoku University, Japan

Application of Titanium Sponge Screenings for Obtaining Titanium Carbide and Carbidic Steel

G.A. Kolobov, A.V.Drozdenko, V.I. Drozdenko, State Engineering Academy, Ukraine

Magnetically-Controlled Electroslag Melting (MEM) of Aviation Alloys

Ya.Yu. Kompan, I.V.Protokovilov, E.O. Paton Electric Welding Institute of NASU, Ukraine

V.N. Moiseev, All-Russia Institute of Light Alloys, Russia
Some Aspects of Production Process for Titanium Alloys with Specified Physical and Chemical Properties

P.S. Altman, M.O. Leder, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Numeric Analysis of Thermophysical Model of Consumable Electrode Vacuum-arc Melting Process

P.S. Altman, Y.A. Nasyirov, A.N. Trubin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

M.I. Musatov, All-Russia Institute of Light Alloys, Russia
Status of Titanium VAR and Plasma and Electron Beam Cold Hearth Melting

Eldon Poulsen, Las Vegas, Nevada, USA

William Chinnis, Retech, Ukiah, CA, USA

Effect of Some Factor on the Al Evaporation Processes in Vacuum Arc Melting of Ti alloys

A.L. Bereslavskiy, Ed. A. Karasyev, CRISM "Prometey", Russia
Quality of Mass-Produced Ingots, Billets, and Forgings in Ti-10V-2Fe-3Al Alloys

V.V. Tetyukhin, I.V. Levin, A.S. Shibaniv, I.I. Puzakov, P.S. Altman, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Symposium 9

Forging, Casting, Mechanical Forming, and Modelling

Thursday, 10 June
Session 8e

11²⁰

Keynote

Design of Thermomechanical Processes for the Breakdown of Alpha/Beta Titanium Alloys with Colony Alpha Microstructures

S.L. Semiatin, Air Force Research Laboratory, USA

G.W. Kuhlman, Aluminium Company of America, USA

I. Weiss, Wright State University, USA

V. Seetharaman, UES, Inc., USA

Production of Equiaxed Microstructures in Titanium Alloys Using a Radial Forging Machine

A.F. Wilson, L.S. Radford, D.F. Neal, Timet UK (Research and Development), UK

Fine-Grained Billet Processing of Titanium Alloys

G.A. Salishchev, R. Galeyev, O. Valiakhmetov, S. Zherebtsov, Institute for Metals Superplasticity Problems, Russia

M.F.X. Gigliotti, B.V. Bewlay, GE Corporate Research and Development, USA
Engineering of Nanostructured Titanium for Structural Application

V.V. Latysh, G.I.Raab, V.V.Stolyarov, R.Z. Valiev, Institute of Physics of Advanced Materials Ufa State Aviation Technical University, Russia

T.C. Lowe, Y.T. Zhu, Los Alamos National Laboratory, USA
Development of Forging from Ti-6-22-22 for Structural Applications

G. Terlinde, G. Proske, G. Fischer, OTTO FUCHS Metallwerke, Germany