Ednesday, 9 June Session 3a 900 Keynote
Yüklə 437,73 Kb.
|
- Bu səhifədəki naviqasiya:
- Thursday, 10 JUNE Session 7a
- Thursday, 10 JUNE Session 7g, 8g; Poster symposium 2 9 00 -13 20
- Symposium 3 Microstructur e, Physical and Mechanical Properties W ednesday, 9 June
- Thursday, 10 June
  Symposium 1
Theory of Alloys and Phase Transformations Wednesday, 9 June Session 3a 900 Keynote Effect of the Phase and Structural Transformation on the Mechanical and Functional Properties of the Titanium Alloys A.A. Ilyin, MATI-Russian State Technology University after Tsiolkovsky K.E., Russia I.S. Polkin, All-Russia Institute of Light Alloys, Russia Development Perspectives of Titanium Alloys V.N. Moisseev, N. V. Syisoyeva, All-Russian Institute of Aircraft Materials, Russia New Tendencies in the High-Temperature Strength Enhancement of the Titanium Based Alloys L.D. Kulak, O.I. Blankovsky, S.A. Firstov, Institute for Problems of Materials Science, NAS, Ukraine Structure of Solid Ti-Al Solutions with Aluminium Content Less than 7.5% S.S. Ushkov, I.N. Razuvaeva, CRISM "Prometey", Russia Formation of 2 in Near- Ti-Al Alloys H. Liew , G.D. W. Smith , Department of Materials, University of Oxford, UK J.Koike, A.Cerezo, Department of Materials Science, Tohoku University, Japan
1120 About the Combined Approach for Estimates of Ability to Mutual Solubility of Chemical Elements in a Solid-State Titanium L.N. Grishchishyna, V.N. Minakov, V.I.Trefilov, The I.N. Frantsevich Institute for Problems of Materials Science, NASU, Ukraine About the Purposefulness of Introduction of the Terms of Aluminum and Molybdenum Strength Equivalents of Alloying Elements in Titanium Alloys B.A. Kolachev, D.V. Ryndenkov Russian State Technological University named after K. Tsiolkovsky, Russia V.A. Volodin, Normal Corporation, Russia
Guo Zhanli, W. Sha, Department of Civil Engineering the Queen's University of Belfast, UK Phase Stability in Nitrogen-Containing Ti-64 and Ti-17 M.F.X. Gigliotti, B.P. Bewlay, General Electric Company, Corporate Research and Development, USA Session 5a 1440 Mechanisms of Martensite Formation and Tempering in Titanium Alloys and Their Relationship to Mechanical Property Development O.M. Ivasishin, Institute of Metal Physics, National Academy of Sciences, Ukraine H.M. Flower, Imperial College of Science, Technology and Medicine (ICSTM), UK G.Luetjering, Technical University Hamburg-Harburg, Germany A Critical Analysis of the / Interface Phase in Ti-Based Alloy Z.X. Guo, Q. Kang , Department of Materials Queen Mary & Westfield College, UK D. Li, Q. Kang , Laboratory of Titanium Alloys, Institute of Metal Research, Chinese Academy of Sciences, China Structural and Phase Transformations in Cold Strained Ultra Fine Grained Titanium Alloy N.A. Drozdova, A.A. Popov, I.Yu. Pushmintsev, Ural State Technical University, Russia
O.M. Shapovalova, A.V. Shapovalov, I.A. Markova, E.V. Zolotko, Dniepropetrovsk State University, Ukraine Investigation of Dynamic Recrystallization on Two-Phase Titanium Alloys Ti-6Al-2Mo-2Cr and Ti-6Al-4V Jan Sieniawski, K.Kubiak, W.Ziaja, Department of Materials Science, Rzeszow University of Technology, Poland Phase Transformations in Titanium with Hydrogen (Deuterium) at Large Plastic Deformation under Pressure O.A. Elkina, R.N. Eshchenko, A.M. Patselov, V.P. Pilyugin, G.G.Taluts, Institute of Metal Physics, Ural Div., RAS, Russia Session 6a 1700 Phase Transformation in Binary Titanium-Base Alloys with Metals of Groups I, IV-VIII of the Periodic Table A.V. Dobromyslov, Institute of Metal Physics, Ural Div., RAS , Russia Phase Transformations of Ti-6.8 Mo-4.5 Fe-1.5Al a Resistometric Study J. Debuigne, F.Prima, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France Role of the Phase Diagrams for Development Titanium Alloys Yu.K.Kovnerisly and P.B.Budberg, Baikov Institute of Metallurgy and Material Science, Russian Academy of Science, Moscow, Russia Carbides and Borides in Titanium Alloys Prepared by Rapid Quenching from the Melt N.V.Syisoyeva, V.N. Moisseev, S.G. Glazunov, All-Russian Institute of Aviation Materials, Russia Hydrides and Eutectoid Transformation Products in Ti-H Alloys Caibei Zhang, Qiang Kang, Zuhan Lai, Department of Materials Science, College of Science, Northeastern University, China Stability Studies of the Nitride Phase in the Ternary System Ti-Zr-N at 13500 С J. Debuigne, E. Etchessahar, J.P. Bars, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France
Phase Transformations and Deformation Structure in TiVCrAl Alloys P. Blenkinsop, Y.G. Li, M. H. Loretto, IRS in Materials for High Performance Applications, The University of Birmingham, UK D. Rugg , W. Voice , Rolls-Royce Plc, UK Analysis of the Role of Plastic Deformation on the Transformation Kinetics of the Metastable -Cez Titanium Alloy E. Gautier, E. Laude, D.Delannoy, P. Archambault, LSG2M- UMR CNRS/INPL/UHP, France Relation between Athermal Phase and Isothermal Phase in Ti-V Alloys Masahiko Ikeda, Shin-Ya Komatsu, Takashi Sugimoto, Faculty of Engineering, Kansai University, Japan Yukiko Shibao, Graduate Student of Kansai University, Japan
A. Bhattacharjee, Vydehi A. Joshi, S.M. Hussain, A.K. Gogia , Defence Metallurgical Research Laboratory, India A Statistical EPMA Method for Characterising Fine Scale Chemical Heterogeneities in Non-Equilibrium Microstructures of - Metastable Titanium Alloys T. Grosdidier, M.J. Philippe, LETAM, CNRS-URA 2090, France Phase Transformations and Heat Treatments of Two New Beta Titanium Alloys J. Debuigne, I.Thibon, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France Session 8a 1120 Ageing of Deformed Alloys VT22I, Ti-10-2-3 with Hydrogen A.A. Popov, A.G. Illarionov, A.V.Korelin, Ural State Technical University, Russia M.Yu. Kollerov, Russian State Aviation Technological University, Russia
E. Sukedai, J. Okuhara, H.Hashimoto, Okayama University of Science, Japan C. Ouchi, NKK Corporation, Japan
B.H. Choi, B.H. Lee, Department of Metallurgical Engineering, Kangnung National University, Korea Y.T. Lee, S.E. Kim, S.J. Kim, Department of Materials Technology, Korea Institute of Machinery and Materials, Korea
T. Grosdidier, M.J. Philippe, LETAM, CNRS-URA 2090, France Effects of Hydrogen on Stress-Induced Martensitic Transformation in Ti-10V-2Fe-3Al Alloy Hao Zhang, Tosoh SMD, Inc., USA Wednesday, 9 June Session 3f, 4f, Poster symposium 1 900 - 1320 Structural Evolution of Nd-Rich Phase Particle in Ti-55 Alloy G.P. Li, D.Li, Y.Y.Liu, Q.J. Wang, S.X.Guan, Department of Titanium Alloys Institute of Metal Research, Chinese Academy of Sciences, China
M.A. Skotnikova, Saint-Petersburg Machine Building Institute, Russia V.I.Syshchikov., S.S. Ushkov, CRISM “Prometey”, Russia Study into Decomposition of Metastable -Phase During Isothermal Treatment in the VT35 Titanium-Based Alloy A.G. Illarionov, A.A. Popov, D.A. Pumpiansky, Ural State Technical University, Russia
T.L. Trenogina V.A. Vozilkin, V.N. Derevyanko, Institute of Metal Physics, Ural Div., RAS, Russia Study of O-phase Formation under the Ageing of Super-2 Alloy S.L. Demakov, L.S. Stepanov, V.D. Kibalnic, Ural State Technical University, Russia Formation "- and -Phases in the Ti-Os Alloys A.V. Dobromyslov, V.A. Elkin, Institute of Metal Physics, Ural Div., RAS, Russia The Features of the Formation of the Non-Equilibrium Phases in the Titanium-Copper alloys A.V. Dobromyslov N.V. Kazantseva, Institute of Metal Physics, Ural Div., RAS, Russia Phase Diagram of the Ti-Ga System Antonova N.V., Tretyachenko L.A., Velikanova T.Ya., The I.N. Frantsevich Institute for Problems of Materials Science, NAS, Ukraine Equation of State and Atomic Characteristics for Ti, TiC and TiN D.A. Zakaryan, The I.N. Frantsevich Institute for Problems of Materials Science, NAS, Ukraine Peculiarities of Phase Transformations and Properties of Aging Shape Memory Ti-Ni Alloys L.I. Yurchenko, V.G. Pushin, T.G. Koroleva, A.Yu. Sokolova, Institute of Metal Physics, Ural Div., RAS, Russia Microstructure and Martensitic Transformations in Rapidly Quenched from Melt TiNi, TiNiCo, TiNiFe Shape Memory Alloys V.V. Popov, V.G. Pushin, T.E. Kunstevich, N.I. Kourov, Institute of Metal Physics, Ural Div., RAS , Russia N.M. Matveeva, Baikov Institute of Metallurgy, RAS, Russia Hardening of Titanium Alloys Using Concentrated Energy Flows A.I. Gordienko, V.V. Ivashko, Physical-Technical Institute of National Academy of Sciences of Belarus, Republic of Belarus
Intermetallics Wednesday, 9 June Session 3b 900 Keynote of USA Gamma Alloy Technology 1999 Dennis M. Dimiduk, Paul A., Y-W. Kirn, Materials & Manufacturing Directorate, Air Force Research Laboratory, AFRL/MLLM, OH, USA McQuay, Howmet Corporation Operhall Research Center, USA Gamma-Based Titanium Aluminide Sheet/Stringer and Honeycomb Structures for Use in High Temperature Aerospace Applications Clemens Helmut, Institut fuer Metallkunde, Universitaet Stuttgart, Germany Leholm Robert, BF Goodrich Aerospace, USA
Harvey M. Flower, Imperial College of Science, Technology and Medicine, UK Julie A. Christodoulou, U.S. Office of Naval Research, International Field Office, Europe
R. Yang, Y.L. Hao, D. Li, Institute of Metal Research, Chinese Academy of Sciences, China Properties, Processing and Applications of -Based TiAl Guether Volker, GfE Metalle und Materialien GmbH, Germany Session 4b 1120 Structure Aspects of Heat Treatment Dependence of Tensile Properties of Gamma Ti-Al Based Alloy Anoshkin N.F., Shakhanova G. V. , Smirnova T.R., All-Russia Institute of Light Alloys, Russia Microstructure and Mechanical Properties of an Orhorhombic Titanium Aluminide Alloy Kumpfert Jorg, DLR- Institute of Materials Research, Germany Grain Size Effect on Phase Transformation During Continuous Cooling in Ti48Al2Cr2Nb Alloys D. Hu, P.A. Blenkinsop, M.H. Loretto, University of Birmingham, UK The Effect of Thermo-mechanical Processing on the Microstructure and Mechanical Properties of Orthorhombic Titanium Alloys J.J. Colvin, M.R. Winstone, A. Partridge, Defence Evaluation and Research Agency (DERA), UK The Effect of Microstructure and Lamellar Orientation on Cyclic Fatigue Life of -TiAl Alloys M.R. Salmani, P.Bowen, IRS in Materials for High Performance Applications, The University of Birmingham, UK Microstructures and Mechanical Properties of Prealloyed P/M Ti-22Al-27Nb Satoshi Emura, Masuo Hagiwara, National Research Institute for Metals, Japan Session 5b 1440 Research and Development of Titanium Aluminides in Chinese Aeronautics Fu-Sheng Sun, C.X. Cao, J.X. Cao, J.M. Ma, M.G. Yan, Beijing Institute of Aeronautical Materials, China Development of New Orthorhombic (Ti25Al25Nb)/SiC Intermetallic Composites for Advanced Space Applications J. Coleto, J. Goni, C. Ortiz, J. Marcos, INASMET, Spain G. Ramusat, ESA/ESTEC/QMO, The Netherlands
Feng Tang, Satoshi Emurai, Masuo Hagiwara, National Research Institute for Metals, Japan Development of Fully Lamellar Microstructure with "Widmanstatten" Colonies in PM Ti-48Al-2Nb-2Cr Sheet Material M.C Chaturvedi, Q. Xu, The University of Manitoba, Canada Electronic Structural Study of Ordering Behaviour of Alloying Elements in Some Ti Based Compounds Dongsheng Xu, Yan Song, Dong Li, Zhuangqi Hu, Institute of Metal Research, Chinese Academy of Sciences, China
Y. Minonishi, Institute for Advanced Materials Processing, Tohoku University, Japan Session 6b 1700 Structure and Properties of Intermetallic TiAl(Cr,Mo,Si) Alloys for Lightweight Engine Parts S. Knippscheer, G. Frommeyer, Max-Planck-Institut fur Eisenforschung GmbH, Germany Hydrides in Thermally Charged Ti-24Al-14Nb-3V-0.5Mo Alloy L.L. He, Laboratory of Atomic imaging of Solids, Institute of Metal Research, Chinese Academy of Sciences, China L. Dong, C.B. Zhang, Northeastern University, China
S.L. Demakov, L.S. Stepanov, A.A. Popov, The Ural State Technical University, Russia Deformation Behaviour Anomalies of Gamma Titanium Aluminides O.V. Antonova, B.A. Greenberg, Institute of Metal Physics, Ural Branch, Russia M. A. Ivanov, Institute of Metal Physics, National Academy of Sciences, Ukraine
G.A. Bochvar, L.A. Bykova, L.I. Nikolaeva, All-Russia Institute of Light Alloys, Russia Thursday, 10 JUNE Session 7g, 8g; Poster symposium 2 900-1320 Superlight Heat-resistant TiAl3-based Alloys T.A. Barmina, Yu.I. Ponomarev, Yu.K. Barmin, B.N. Podgorskij, K.M. Konstantinov, Joint-stock Research and Production Corporation "KOMPOZIT", Russia
(HREM Observations of TiAl/Ti3Al Interfaces and Grain Boundaries in the TiAl Intermetallics) L.L. He, R. Yu, H.Q. Ye, Laboratory of Atomic imaging of Solids, Institute of Metal Research, Chinese Academy of Sciences, China L. Dong, Northeastern University, China Liquid State Interaction in Titanium Carbonitride - Titanium Nickelide Alloys with Addition of Titanium, Zirconium, Niobium and Molybdenum L.H. Askarova, I.G.Grigorov, E.V. Shipachev, A.N.Ermakov, V.V. Fedorenko, Yu.G.Zainulin Institute of Solid State Chemistry, Ural Branch of Russian Academy of Sciences, Russia The Heterophase Structures of Titanium Aluminides Synthesized by Explosive Reaction Pressing E.P. Romanov, B.A. Greenberg, S.V. Sudareva, Institute of Metal Physics, Ural Div., RAS, Russia E.V. Shorokhov, Russian Federal Nuclear Centre-VNIITF, Russia
V.G. Pushin, T.G. Koroleva , L.I.Yurchenko, S.B. Volkova, Institute of Metal Physics, Ural Div., RAS, Russia N.M. Matveeva, Baikov Institute of Metallurgy, RAS, Russia
V.G. Pushin, V.N.Khachin, L.I. Yurchenko, Institute of Metal Physics, Ural Div., RAS, Russia Polycomponent Shape Memory Ti-Ni Alloys V.G. Pushin, L. I. Yurchenko, N.V. Protasevich, V.N, Khachin, A.S. Chistyakov, K.A. Yurchenko, Institute of Metal Physics, Ural Div., RAS, Russia Mechanisms of Recrystallization in TiAl-Based Intermetallic Alloy Hersart de La Villemarque, Yann, C. Quesne, T. Baudin, R. Penelle, C.N.R.S.- Universite Paris-Sud Orsay, France Phase Evolution, Stability and Microstructure-Mechanical Properties Relations in Orthorhombic Ti-Al-Nb-Ta Alloy Y. Mao, D. X. Zou, J. W. Zhang, S. Q. Li, Z. Y. Zhong, Central Iron & Steel Research Institute, Beijing, China J. H. Peng, Southwestern Jiaotong Universtity, Chengdu, China
Microstructure and Mechanical Properties of Titanium Alloys J. Albrecht and G. Lutjering Technical University Hamburg-Harburg, Germany Relationship between Mechanical Properties, Microstructures and Parameters of Thermomechanical Processing under Complex Loading Conditions in Ti-6.5Al-3.5Mo-1.6Zr-0.27Si Alloy O.A. Kaibyshev, M.V. Karavaeva, R.M. Kashaev, L.A. Syutina, V.K. Berdin, Institute for Metals Superplasticity Problems, Russia Influence of Hot Deformation and Heat Treatment Regimes on Structure and Mechanical Properties of Titanium Alloy VT22 G. A. Salishchev, Institute for Metals Superplasticity Problems, RAS, Russia I.V.Levin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia L.A. Smolyakova, JS “All-Russian Institute of Light Alloys”, Russia Microstructure and Mechanical Property Relation of Ti-6Al-2Sn-2Zr-2Mo-2Cr-Si Zhang Xiao-Dong, The Ohio State University, USA W.A.Baeslack III, College of Engineering, The Ohio State University, USA D.Evans, Materials Directorate, WL/MLLM, USA T.Ginter, Dept. 73-C3, USA
G. Luetjering, C. Sauer, Technical University Hamburg-Harburg, Germany Session 4c 1120 Compositional Effects on Dynamic and Static Fracture Properties of Alpha-Beta Titanium Alloys in Laboratory Heats B. B. Rath, M.A. Imam, Naval Research Laboratory, USA I.L. Caplan, NSWC, Carderock Division, USA R.W. Judy, Retired, USA Analysis of Compositional Effects on Fracture and Stress Corrosion Cracking Properties of Titanium Alloys in Heavy Section Sizes B. B. Rath, M.A. Imam, Naval Research Laboratory, USA R.W. Judy, Retired, USA I.L. Caplan, NSWC, Carderock Division, USA Decomposition of Nonequilibrum Solid Solutions and Mechanical Properties of Titanium Alloys M. A. Skotnikova, Saint-Petersburg Machine Bilding Institutte, Russia S.S. Ushkov, CRISM “Prometey”, Russia
P. Blenkinsop, A.R. Coleman, P. Bowen, IRS in Materials for High Performance Applications, The University of Birmingham, UK Kinematical Mechanisms of Spallation in Shock-Loaded Titanium Alloys Yu.I. Mescheryakov, N.I. Zhigacheva, A.K. Divakov, Institute of Mechanical Engineering Problems RAS, Russia B.K. Barakhtin, CRISM "Prometey", Russia Effect of Heat Treatment on Strength Properties of Two-Phase Titanium Alloys with Lamellar Microstructure J. Sieniawski, W.Szkliniarz, R.Filip, K.Kubiak, University of Technology, Poland
1440 Microcrack Propagation in the LCF- and HCF-Regime in Ti-6Al-4V G. Luetjering, J.A.Hines, J.O. Peters, Technical University Hamburg-Harburg, Germany Influence of the Lazer Surface Treatment on the Fatigue Stress ( + )- Titanium Alloy VT3 V.L. Rodionov, I.S. Polkin, All-Russia Institute of Light Alloys, Russia Influence of Grain Size and Cooling Rate on the Fatigue Performance of Titanium Alloys Ivasishin O.M., Institute of Metal Physics, National Academy of Sciences, Ukraine Luetjering G., Technical University Hamburg-Harburg, Germany
H.J. Maier, S. Hardt, P.Pototzky, H.-J. Christ, Institute fur Werkstoffechnik University of Siegen, Germany The Cyclic Deformation Behaviour of Ti-6Al-4V Alloy with Widmanstatten Microstructure F.J. Gil, J.M. Manero, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, University Politechnique of Catalonia, Spain High Strength State and Fatigue Properties of Nanostructured Titanium Alloys Processed by Severe Plastic Deformation V.V. Stolyarov, L.O. Shestakova, A.I. Zharikov, V.V. Latysh, R.Z. Valiev, Institute of Physics of Advanced Materials Ufa State Aviation Technical University, Russia Session 6c 1700 Internal Damage Characterization of Cyclically Loaded Ti-9Al-4V Specimens Using TEM and Non-Linear Acoustics J. Maurer, J.Frouin, S.Sathish, T.Matikas, D.Eylon, The University of Dayton, USA Change in Mechanical Properties of Ti-6Al-4V ELI and Pure Titanium During Fatigue Failure Process Mitsuo Niinomi, Kei-ichi Fukunaga, Department of Production Systems Engineering, Japan Toshikazu Akahori, Toyohashi University of Technology, Japan
K. Le Biavant, S. Pommier, C. Prioul, LMSS-Mat, Ecole Centrale Paris, France Microstructure and Mechanical Properties of Hammer Forged Ti-10V-2Fe-3Al W. Horvath, G. Weber, Böhler Schmiedetechnik GmbH & CO KG, Austria Grain Growth Kinetics of Ti-0.2Pd: Effect of the Addition of Palladium on Pure Titanium F.J. Gil, J..M. Manero, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, Spain Picas J.A., Forn A., University Politechnique of Catalonia, Spain
B.A. Kolachev , B.B. Bylov, Russian State Technological University named after K. Tsiolkovsky, Russia Thursday, 10 June Session 7c 900 Keynote The Development of -Titanium Alloy Hui Songxiao, Zhang Zhu, Zhang Shuqi, General Research Institute for Non-ferrous Metals, China
O.M. Ivasishin., P.E.Markovsky, D.G.Sawakin, Institute of Metal Physics, Ukraine P.G. Allen, TIMET, Henderson Technical Laboratory, USA
Takayuki Kidai, Hideto Ohyama, Titanium Matalls Technology Dept. KOBE STEEL, Ltd, Japan Shinya Ishigai, Shoju Masaki, Steel Casting & Forging Plant. KOBE STEEL, Ltd, Japan Takao Ikushima, Materials Technology Dept. Ishikawajima-Harima Heavy Industries Co., Ltd, Japan Fatigue Crack Growths Mechanisms in Ti-10V-2Fe-3Al Alloys Produced Using Powder Blended Elemental Compacts Teruo Kishi, Hisashi .Mori, Research Centre for Advanced Science and Technology, The University of Tokyo, Japan P. Bowen, LRS in Materials for High Performance Applications/School of Metallurgy and Materials, The University of Birmingham, UK
V.L. Rodionov, T.V. Ishunkina, E.S. Lebedeva, A.V. Demidenkov, All-Russia Institute of Light Alloys, Russia Yüklə 437,73 Kb. Dostları ilə paylaş:
|