Ednesday, 9 June Session 3a 900 Keynote

Session 8c

11²⁰

Effect of Heat Treatment on Tensile Behaviour of Ti-10V-2Fe-3Al Alloy

A. Bhattacharjee, Vydehi A. Joshi, A.K.Gogia, Defence Metallurgical Research Laboratory, India

Microstructure and Tensile Behaviour of a Low Cost Alloy

A. Bhattacharjee, Vydehi A. Joshi, A.K.Gogia, Defence Metallurgical Research Laboratory, India

Study of a New High Strength and Toughness beta Titanium Alloy

Chen Jun, Chang Hui, Li Yongxin, Zhao Xiangmiao, De Ju, Yang GuanJun, North-west Institute for Non-ferrous Metal Research, China

Microstructure and Mechanical Properties of Titanium Alloys with Bi-Lamellar Microstructures

G. Luetjering, G.Schroeder , J.Albrecht, Technische Universitet Hamburg-Harburg, Germany

Study on Fracture Toughness and Crack Growth Rate of Ti-15-3 Alloy

Hong Quang, Wu Yiqin, Luo Guozhe, North-west Institute for Non-ferrous Metal Research, China

Effects of Composition and Primary -phase on Ductility of Ti-Fe Alloys

Shin-Ya Komatsu, Masahiko Ikeda, T. Sugimoto, Faculty of Engineering, Kansai University, Japan

Koichiro Inoue, Graduate school, Kansai University (present location; Daido steel Co. Ltd), Japan

E. Higashikawa, Student of Kansai University (present location; Shin-maywa Industries Co. Ltd) Japan

M. Ueda, Student of Kansai University (present location; Graduate school, Osaka University), Japan
Session 9c

14⁴⁰

Aging Response of New Type Metastable beta Titanium Alloy

H. Chang, Y.X. Lin, J. Chen, X.M. Zhao, W.S. Wang, J. Den, G.J. Yan, Y.L. Li , North-west Institute for Non-ferrous Metal Research, China

On the Mechanical Properties of Titanium Containing Materials in Condition of Essentially Non-Equilibrium Loading

V.E. Khartsiev, E.M.Drobyshevski, B.G.Zhukov, A.F. Ioffe Physical Technical Institute, RAS, Russia

L. Merhari, European Centre for Ceramic Research, France

A.H.Ratner, S.V. Aleksandrovsky, St.Petersburg State Mining Institute, Russia

I.B.Ban'kovskaja , G.N. Gorbatova, Institute of Silicate Chemistry, RAS, Russia
Effect of Dispersoids on High Temperature Properties of Near Titanium Alloy

A.K. Gogia, A.G. Paradkar, Defence Metallurgical Research Laboratory, India

Influence of Silicides on the Formation of Structure and Properties of High-Temperature Titanium-Based Alloys

A.A. Popov, O.A. Elkina, N.A. Drozdova, Ural State Technical University, Russia

A.V. Trubochkin, “VSMPO”, Russia
Cracking Behaviours of a Titanium Alloy Containing Rare Earth Nd

Z.S. Zhu, J..M. Ma, Y. Gao, C.X. Cao, M.G. Yan, Beijing Institute of Aeronautical Materials, China

Session 10c

17⁰⁰

Creep Failure Mechanisms in Ti-6Al-4V Alloys

A.M. Irisarri, F.J. Seco, FUNDACION INASMET, Spain

Primary Creep Resistance and Deformation Microstructure in Ti-6-22-22S Alloy

J. Koike, K.Maruyama, Dept. of Materials Science, Tohoku University, Japan

H. Oikawa, College of Industrial Technology, Japan
Resent Developments in the Ambient Temperature Creep Deformation Behaviour of Two-Phase Titanium Alloys

S. Ankem , C.A. Greene, Department of Materials and Nuclear Engineering, University of Maryland, USA

Creep Behaviour at Elevated Temperature in Ti-55 High Temperature Titanium Alloy

Jiafeng Lei, Dong Li, Zhongguang Wang, Zhuangqi Hu , Institute of Metal Research, Chinese Academy of Sciences, China

Effect of Ni, Fe and Primary Alpha on the Creep of Alpha-Beta Processed and Annealed Ti-6Al-2Sn-4Zr-2Mo-09Si

P.A. Russo, K.O. Yu, RMI Titanium Company, USA

Creep of Two-Phase Titanium Alloy and Numerical Modelling

W. Ziaja, R. Filip, J. Sieniawski , Rzeszw Universito of Technology, Poland

Friday, 11 June

Session 11c

9⁰⁰

Study of the Plastic Deformation of Ti-6Al-4V at Cryogenic Temperatures

L. Guetaz, A. Ambard, L.Briottet, X.Baillin, CEA/CEREM/DEM, France

D.Guichard, SEP Division de Snecma, France

The Effect of Adding Mo Element on the Tensile Strain Behaviour of a Single -Phase Ti-Alloy AT 20K

Yang Guanjun, Cai Xuezhang, Du Yu Deng Ju, Zhou Lian, North-west Institute for Non-ferrous Metal Research, China

Internal Crack Initiation in High-Cycle Fatigue of Ti-Fe-O Alloy at Liquid Nitrogen Temperature

Hisanaga Yokoyama, Graduate student Kogakuin University, Japan

Osamu Umezawa, Kotobu Nagai, National Research Institute for Metals, Japan

Toshiyuki Suzuki, Kunio Kokubo, Kogakuin University, Japan

The Influence of Hydrogen Treatment on the Microstructure and Mechanical Properties of Ti-6242

A. Ilyin, A. Mamonov, MATI-Russian State Technology University, Russia

J. Albrecht, G. Lutjering, Technical University Hamburg-Harburg, Germany
Hydrogen-Induced Cracking in Titanium Alloys

A. Nоzue, K. Endo, S. Tateishi, Faculty of Science and Technology, Sophia University, Japan

Elasto-Plastic Behaviour of Alpha-Titanium Alloy Without (Ti40) and with Hydrides

(Ti40-H)

M. Clavel, I. Guillot, X. Feaugas, UIC, LG2mS UPRESA CNRS, France
Session 12c

11²⁰

Submicrocrystalline Titanium and its Alloys: Structure and Mechanical Properties

G. Salishchev, R. Galeyev, O. Valiakhmetov, S. Zherebtsov, S. Mironov, S. Malysheva, Institute for Metals Superplasticity Problems, Russia

A. Smyslov, E. Safin, Ufa State Aviation Technical University, Russia
Study on the Titanium Alloys with High Elastic Modulus and High Strength

Xizhe Wang, Jianyun Shen, Zhu Zhang, Weidong Zhuang, Zhihui Zhang, Shiwei Liu, Songxiao Hui, Yongliang Wang, Jinsheng Xiao, General Research Institute for Non-ferrous Metals, China

The Relationship between Heat-treatment and Properties of Ti-6.5Al-2.5Sn-4Zr-0.5Mo-1Nb-0.15Si Alloy

(Sbor. Tesis-The Heat Treatment, Microstructure and Properties of Ti-6.5Al-2.5Sn-4Zr-0.5Mo-1Nb-0.15Si Alloy)

Xu Guodong, Wang Guisheng, General Research Institute for Non-ferrous Metals, China

Xiao Jinsheng, China National Non-ferrous Metals Industry Corporation, China

The Ti-0.2Pd Alloys Properties Improvement Through Heat Treatments

A. Forn Alonso, J. A. Picas Barrachina E.U. Politecnica de Vilanova i la Geltru., Spain

F.J. Gil Mur, E.T.S. Enginyers Indusrtials de Barselona. Universitat Politecnica de Catalunya, Spain
The Strength & Ductiliry of Textured Ti-Alloys

A. Ilyin, S.Betsofen, MATI-Russian State Technology University, Russia

L. Bunin, Rocket-Space Corp. “Energija”, Russia

Fatigue Crack Nucleation in VAC and AIR at 500 ⁰C of MI 834

J. Mendez, S. Mailly, E.N.S.M.A., France

G. Luetjering, O. Schauerte, A. Gysler ,Technical University Hamburg-Harburg, Germany

Wednesday, 9 June

Session 3g, 4g, 5g, 6g; Poster symposium 3

9⁰⁰ - 18⁰⁰

Behaviours of Hot Plastic Deformation of Ti-17 Alloy

Wang Yong Liang, Zhong Zhu, Wang Xi Zhe, General Research Institute for Non-ferrous Metals, China
Superplastic Properties of Mechanically Alloyed Ti-6Al-4V with Boron Additions

C. M. Ward-Close, A. Wisbey , T. Hinder,P. Goodwin , Defence Evaluation and Research Agency (DERA), UK

Cyclic Performance of a TiNi Shape Memory Alloy Spring

Mi Xujun, Zhu Ming, Guo Jinfang, General Research Institute for Non-ferrous Metals, China

Influence of Deformation Fraction on the Texture and Structure of VT1-0 Alloy

S.V. Grebenkin, A.G. Illarionov, A.A. Popov , Ural State Technical University, Russia

Effect of Hydrogen Additions on Deformation Mechanism During Cold Rolling -Titanium Alloy

L.I. Anisimova T.A. Sokolova, Institute of Machines Science RAS, Ural Division , RAS, Russia

B.K. Sokolov, Institute of Metal Physics, Ural Division , RAS, Russia
High Temperature Deformation Mechanism of Ti 40 Burn Resistant Titanium Alloy

ZhaoYongqing ,Zhou Lian, Deng Ju, North-west Institute for Non-ferrous Metal Research, China

Structure and Properties of Two-phase Titanium Alloys. Influence of History of Superplastic Deformation on Formation of Specified Properties in Articles

A.G. Ermachenko, Institute for Metals Superplasticity Problems, RAS, Russia

Anisotropy Parameter Evaluation in Textured Titanium Alloy Sheets

Serebryany V.N., Koknaev R.G., All-Russia Institute of Light Alloys, Russia

Investigation of Structural-Textural Marine Titanium Pseudo --Alloys

Y. N. Rasuvaeva, S.S. Ushkov, V.N. Kopylov, CRISM "Prometey", Russia

The Effect of Ni, Fe and Si on the Creep of Ti-6Al-2Sn-4Zr-6Mo

P.A. Russo, K.O. Yu, RMI Titanium Company, USA

Hot Compressive Microstructural Study of TIMETAL 21S Alloy

Peng Yiqun, General Research Institute for Non-ferrous Metals, China

Shen Guiqing, Beijing University of Aeronautics and Astronaotics, China
Investigation on Low Cycle Fatigue Properties of Ti-2Al-2.5Zr Alloy Tube and Rod

Yu Zhentao, Deng Ju, Zhou Lian , North-west Institute for Non-ferrous Metal Research, China

Deformation and Fracture of Titanium Alloys under Shock Loading and Their Micromechanisms

S. A. Atroshenko, D.M. Olenin, Institute of Mechanical Engineering Problems RAS, Russia

S.N. Khomov, CRISM “Prometey”, Russia
Effect Alloying with Hydrogen and Plastic Deformation on the Density, Structure and Properties of Compacted Spongy Titanium

L.I. Anisimova, V.L. Kolmogorov, A.B. Bukhvalov, Institute of Engineering Science RAS (Ural Branch), Russia

M.M. Gorshkov, B.V. Litvinov, Russian Federal Nuclear Centre Research Institute of Engineering Physics, Russia
Structure and Mechanical Properties of the Ti-Al-Ga Alloys

N.V. Antonova, L.A. Tretyachenko, T.Ya. Velikanova, I.N. Frantsevich Institute for Problems of Materials Science, NAS, Ukraine

Titanium Sample Preparation

Glaser Robert, Allied High Tech Products, Inc, USA

The Effect of Composition and Technology Parameters of TiNi-Base Alloy Semiproducts on Their Microstructure, Mechanical and Damping Characteristics

A.S. Fainbron, S.Y. Lukyanichev , All-Russia Institute of Light Alloys, Russia

Substructure of Titanium Alloys after Cyclic Heat Treatment

Wojciech Szkliniarz, Department of Materials Science, Silesian University, Poland

Investigation of The Mechanical and Physical Properties of TA₇ELI at Cryogenic Temperature

Liu Yaxiu Qian Dongfan Gao Baodong Wan Jiangbo

(General Research Institute for Non-Ferrous Metals of Beijing , China
A Research of Elastic Stresses Influence on the Course of Phase Transformations of VT 22 Alloy During Ageing

N.I. Moder, G.V. Savvateeva, G.A. Bondaryuk, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Symposium 4

Behaviour in Different Environments, Surface and Protection

Wednesday, 9 June
Session 3d

9⁰⁰

Keynote

Temperature and Environment Effects on Fatigue Resistance of Titanium Alloys– Role of Protective Coatings

Jose Mendez, Ensma, France
Physico-Chemical Aspects of Surface Engineering of Titanium Alloys

V. M. Fedirko, A.T.Pichuhin, I.M. Pohreliuk, Karpenko Phys-Mechl Inst of National Academy of Sciences, Ukraine

Relationship between Surface Morphology of Anodized Film and Photocatalytic Property in Some Binary Titanium Alloys with Surface

T. Yasunaga, F. Kamikubo, S. Yamada, Y. Ito, KOBE STEEL, Ltd, Japan

A.Kushibe, T. Ogawa, T. Hasegawa, T. Saitoh, S. Ohno, Takenaka Corporation, Japan

K. Hashimoto, A. Fujishima, University of Tokyo, Japan

On the Surface Properties of Titanium Containing Materials

I.B.Ban’kovskaja , G.N. Gorbatova, Institute of Silicate Chemistry, RAS, Russia

M.I. Baraton, University of Limoges, France

V.E. Khartsiev, A.F. Ioffe Physical Technical Institute, RAS, Russia

A.N. Merhari, European Centre for Ceramic Research, France

A.H.Ratner, M.B. Heilikman, S.V. Aleksandrovsky, St.Petersburg State Mining Institute, Russia

Antibacterial and Deodorizing Performances of a Photocatalytic Titanium Alloy

A.Kushibe, T. Ogawa, T. Hasegawa, T. Saitoh, S. Ohno, Takenaka Corporation, Japan

T. Yasunaga, F. Kamikubo, S. Yamada, Y. Ito, KOBE STEEL, Ltd, Japan

K. Hashimoto, A. Fujishima, University of Tokyo, Japan

Session 4d

11²⁰

A Comparison of Commercial Pure Titanium Produced According to the American ASTM Grade2 and the Russian GOST VT 1-0

Liv Lunde, B. Hilde Nordvik, Marion Seiersten, Institute for Energy Technology, Norway

On Mechanism of Temperature and Stress Influence on the Hydrogen Interaction with Titanium at Hydrogen Pressures up to 150 MPa

Yu.I. Archakov, T.D. Aleferenko, A.D. Plotnikov, All-Russian Scientific-Research Institute for Petrochemical Processes, Russia

Thermodynamic and Kinetic Investigation of Low Pressure Hydrogen Absorption by the Titanium Alloys Ti-6Al-4V

T. Grogler, E. Zeiler, C.Mayerhofer, S.M. Rosiwal, R.F. Singer, Lehrstuuhl Werkstoffkunde und Technologie der Metalle (WTM), Germany

W.Auer, Universitat Erlangen-Nurnberg, Germany
The Effect of Environment on the Low-Cycle Fatigue Behaviour of a

Near- Titaniumaluminide at High Temperatures

F.O.R. Fischer, H.J. Maier, H.-J. Christ, Institute fuer Werkstoffechnik, Germany
Metallographic Preparation of Titanium and Its Alloys

George F.Vander Voort, Research and Technology Buehler Ltd., USA

Effect of Micro Surface-Morphology on Spatial Distribution of Specular Glossiness of Architectural Titanium Sheets

Mitsuo Ishii, Titanium Division, Nippon Steel Corporation, Japan

Tatsuo Yamazaki, Isamu Takayama, Hikari Works, Nippon Steel Corporation, Japan
Session 5d

14⁴⁰

Erosion and Corrosion Resistent Coatings for Refractory Titanium Alloys

N.A.Nochovnaya, All-Russia Institute of Aviation Materials, Russia

V. A. Shulov, Moscow Aviation Institute, Russia

M.V. Vinogradov, A.F. Lvov, A.V. Baranovski, Chernyshev Machine-Building Enterprise, Russia

The Oxidation Behaviour of Highly Alloyed -TiAl Alloys under Isothermal and Cyclic Exposure

A. Partridge, Defence Evaluation and Research Agency (DERA), UK

Laser Oxidation of Titanium Alloys

V.O. Popov, V.V. Rybin, E.A. Vainerman, V.N. Goldfine, S.N. Homov, B.D. Kalganov, V.P. Kulik, CRISM "Prometey", Russia

Oxidation Resistant Ti-Al-(Cr) Coatings for Titanium Alloys

M. Peters, C.Leyens, W.A. Kaysser, DLR- Institute of Materials Research, Germany

Grazing Angle XRD on Ion-nitrided Ti6Al4V Components

P.Scardi , P.Moretti, B.Tesi, Dipartimento di Ingegneria dei Materiali, Universita di Trento, Italy

T. Bacci, Dipartimento di Meccanica e Tecnologie Industriali, Universita di Firenze, Italy
Diamond Coatings - a New Approach for Wear Protection of Titanium Alloys

E. Zeiler, T.Grogler, G.Heinrich, S.M. Rosiwal, R.F.Singer, Universitat Erlangen-Nurnberg, Germany

Session 6d

17⁰⁰

Wear Behaviour of Ti-6Al-4V Alloy Treated by Means of Plasma Oxiding and Nitriding Treatments

T. Bacci, F. Borgioli, E. Galvanetto, G. Pradelli, Dip. Meccanica e Technologie Industriali, University of Florence, Italy

B. Tesi, Dip. Ingegneria dei Materiali, University of Trento, Italy
A Method for Scanning the Reaction Behaviour of Ti-X Alloys (X=Mo, Nb, V, Zr) with Hot Gazes Example of Nitriding

A. Guillou, J.B. Bars, D.Ansel, J. Debuigne, INSA-Laboratoire de Metallurgie et Physico-chimie des Materiaux, France

Improvement of Hardness and Wear Resistance of Titanium and Ti6Al4V by Nitrogen Diffusion

D. Rodrigues, J.M. Manero, J.A. Planell, F.J. Gil, Dep. Materials Science and Metallurgical Engineering, ETSEB, University Politechnique of Catalonia, Spain ;Fonseca C., Barbosa M., Instituto Nacional de Engenharia Biomhedic, IBMC, Portugal

Surface Processing of Titanium Alloy Parts by Intensive Pulsed Electron Beams

N. A.Nochovnaya, All-Russian Institute of Aviation Materials, Russia

V.A.Shulov, Moscow Aviation Institute, Russia

V.I. Engelko, Efremov Institute of Electrophysical Apparatus, Russia

G. Muller, G. Shumaher, Institute of Neutron Physics and Reactor Techinque, Germany

M.V. Vinogradov, A.F. Lvov, Chernyshev Machine-Building Enterprise, Russia

Application of Color Metallographic Techniques to Study the Microstructure of Titanium Alloys

J. Radzikowska, J. Stachanczyk, Foundry Research Institute, Poland

Fatigue Microstructures in Titanium Cyclically stressed in Inert Environment

Mikio Sugano, Nur Ismarrubie Zahari, Tadaaki Satake, Yamagata University, Japan

Wednesday, 9 June

Session 3h, 4h, Poster symposium 4

9⁰⁰ – 13²⁰
Chemical Resistance of Titanium in Glass Melts

I.B. Ban'kovskaja, M.P. Syomov, Institute of Silicate Chemistry, RAS, Russia

Effect of Ion-Nitriding on the Rolling-Sliding Wear of the Ti-6Al-4V Alloy

G. Straffelini, B.Tesi, A. Molinari, Dipartimento di Ingegneria dei Materiali, Universita di Trento, Italy

T. Bacci, Dip. di Meccanica e Technologie Industriali, University of Florence, Italy

Development of Relief and Porosity in Niobium-Titanium Alloys in the Process of Thermal Treatment under Vacuum

V. Orlov, L. Fyodorova, Institute of Chemistry KSC RAS, Russia
Influence of Various Factors on the Oxygen Diffusion Layer Formation in Titanium Alloys

V. I. Dyachkov , St.Petersburg State University, Russia

V.I. Syshikov, CRISM "Prometey", Russia
Investigation of Kinetic Dependence of High-Temperature Oxidation of the Titanium Carbide Based Hard Alloys

L.G. Bodrova , V.V. Lazaryuk, Ternopil State Technical University, Ukraine

V.P. Bodrov , Ternopil State Pedagogical University, Ukraine
On Possibility of Self-Ignition of Titanium and Zirconium in Oxygen Flow

V.I. Bolobov, N.S.Prokhorov, RSC "Applied Chemistry", Russia

Effect of Cathode Alloying on Corrosion Characteristics of Titanium Alloys

Ue.V. Chudakov, B.F. Chtcherbinin, CRISM "Prometey", Russia

A Problem of Increasing Corrosion Resistance of High Strength Titanium Alloys by Direct Superficial Alloyage

V. F. Chtcherbinin, J. D. Khesin, CRISM "Prometey", Russia

Nitriding of the VT-23 and VT1-0 Titanium Alloys under Pressure

M.A. Golub, S.F. Marinin, A.P. Matveenkov, Joint-stock Research and Production Corporation "KOMPOZIT", Russia

A.V. Omelchenko, SSC CSRINFM, Russia
Cracks Resistance of Titanium Alloys in Sea Water Containing Hydrogen Sulfide

V.N. Malyshev, CRISM "Prometey", Russia

Examination and Development of Process of Microarc Oxidation of Titanium Alloys

S.V. Korkosh, P.S. Gordienko, CRISM "Prometey", Russia

Pitting Corrosion Behaviour of Titanium Alloy PT-7M in Hot Aqueous Sodium Chloride Solutions

Yu. A. Titov, V. Smirnov, CRISM "Prometey", Russia

An Influence of the Gas–Saturated Layers on Corrosion–Mechanical Strength of Titanium Alloys in Aqueous Chloride Solutions.

V.A. Sher, V.I. Mihailov, Ul.D. Khesin, V.F. Chcherbinin

CRISM “Prometey”, Russia
Effect of the Surface Layer Formed by Laser Oxidation on Fracture Mechanics of Titanium Alloys

Ul.D. Khesin, A.A. Gorbakon, V.O. Popov, E.V. Andronov, A.E. Vainrman, B.D. Kallganov

Central Research Institute of Structural Materials "Prometey", Saint-Petersburg, Russia
Efficiency of Usage of Technological Coatings in Processing of Semi-Finished Products in Titanium Alloys

V.V. Tetyukhin, S.N. Polyanskiy, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Research of Advanced Titanium Alloys with Improved Corrosion Resistance to be Applied in Seawater, for Power, Chemical, and Metallurgical Engineering

G.A. Dyldina, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

N.I. Kirichenko, VIAM, Russia стендовый
A Research of High-temperature Salt Attack of Semis in -, (+)- and -titanium Alloys Depending on the Structural State.

V.S.Synyavsky, G.A.Dyldina, I.V.Levin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

V.V. Usova VILS, Russia

Method of Surface Hardening of Titanium Alloys Operating under Friction Conditions

V. P. Kulik, S.N. Khomov, CRISM "Prometey", Russia

G.K. Ivanov, A. S. Koshkina, SME “Zvyozdochka”, Russia

Symposium 5

Aerospace Applications

Thursday, 10 June

Session 9a

14⁴⁰

Keynote

Evolving Aerospace Applications for Ti Alloys

R.R. Boyer, The Boeing Commercial Aiplanes, USA

J.C. Williams, GE Aircraft Engines, USA

Keynote

Aero-Engine Applications: Present and Future

A. Vassel, ONERA, France

J.Y. Guedou, SNECMA, France

A Survey of Investigation on Titanium Alloys in Chinese Aviation Industry

Cao Chunxiao, Ma Jimin, Sun Fusheng, Institute of Aeronautical Materials, China

Supply Chain and Demand Structure of Titanium Mill Products in the European Aerospace Industry

Dietmar Fischer, Deutsche Titan GmbH, Germany

Session 10a

17⁰⁰

Non-Destructive Lifetime Evaluation for Air-Space Application

A. Ilyin, S.Betsofen , Russian State Technology University, Russia

L.Bunin, Rocket-Space Corp. “Energija”, Russia

V. Sevasteenko, “Rybinskie Motory”, Russia

Superplastic Forming and Diffusion Bonding Titanium Airbus 330&340 Casa Design of the Horizontal Stabilizer Leading Edge

Fernando de Nicolas Lopes, Jose Maria Blanco Saiz, Structures, Engineering Directorate, Spain

Jorge Diaz Garcia, Engineering Development, Spain
Burning Behaviour of Titanium Alloys and Non-Burning Mechanism of Burn Resistant Titanium Alloy

Zhao Yongqing, Zhou Lian, Deng Ju, North-west Institute for Non-ferrous Metal Research, China

Analysis on Burning Mechanism of Titanium Alloys

ZhaoYongqing, Zhou Lian, Deng Ju, North-west Institute for Non-ferrous Metal Research, China

The Use of VT 23 and Other Titanium Alloys for Strustures

A.I. Khorev, All-Russian Institute of Aviation Materials, Russia

Effect of Alloying Element Content on Properties in Ti-Al-Cu Alloy System

Zhu Kangying, Zhao Xiangmiao, Zhao Yongqing, North-west Institute for Non-ferrous Metal Research, Russia

Wednesday, 9 June

Session 5f,6f; Poster Symposium 5

14⁴⁰ – 18⁰⁰
Symposium 6

Marine and Offshore Applications

Friday, 11 June
Session 11a

9⁰⁰

Keynote

Marine Application of Titanium

S. Ushkov, CRISM “Prometey”, Russia
The Use of Titanium in the Offshore Industry

Liv Lunde, Marion Seiersten, Institute for Energy Technology, Norway

Titanium Risers for Offshore Oil Production Fatigue Considerations

Stig Berge, Norwegian University of Science and Technology, Norway

Design of Experiments and Fatigue Crack Growth Rate Evaluation Titanium Dynamic Risers

Morten A. Langoy, Kvaerner Oil and Gas, Stavanger, Norway on assignment at Georgia Institute of Technology, School of Materials Science and Engineering, USA

Stuart R. Stock, Georgia Institute of Technology, School of Materials Science and Engineering and Machanical Properties Research Laboratity,USA
Fractographic and Metallographic Investigation of Microstructural Sensitive Fatigue Crack Growth for Ti-6Al-4V-0.1Ru in Air and Seawater

Morten A. Langoy, Kvaerner Oil and Gas, Stavanger, Norway on assignment at Georgia Institute of Technology, School of Materials Science and Engineering, USA

Stuart R. Stock, Georgia Institute of Technology, School of Materials Science and Engineering and Mechanical Properties Research Laboratory, USA