Epic consortium Members Directory: 11 members This directory is updated every month. Latest revision: June 2017 24ip law Group
Yüklə 429,78 Kb.
|
- Bu səhifədəki naviqasiya:
- Funded Research Projects Experience .
- Advanced Fibreoptic Engineering
- Advanced Packaging Center (APC)
- AMICRA Microtechnologies
- Anteryon Optical Solutions
|
l 
EPIC Consortium Members Directory: 311 members This directory is updated every month. Latest revision: 1 June 2017 
24IP Law Group is an intellectual property consultancy and law firm with offices in Munich, Berlin, Paris, Basel and the United States. We advise clients on coordinating intellectual property strategies with business plans, develop IP strategies, and advise on protection and commercialization of intellectual property. We provide IP due diligence services to investors, mediation and arbitration services to help resolve IP disputes as well as preparing and prosecuting patent, design and trademark applications. www.24ip.com 
Aarhus University is Denmark's largest university. The Department of Engineering was established in 2011, with a focus on a strong interplay with industry and on applied research. The relevant research areas in Electrical Engineering are microwave photonics, optical sensor systems, biomedical devices, and electronic-photonic convergence for future high-capacity systems. www.au.dk/en/ 
Acal BFi is a European leader in advanced technology solutions, providing marketing, engineering, design, manufacturing and custom services and the only such provider with an infrastructure to deliver a broad complementary range of specialist products and bespoke solutions across Europe. Acal BFi Photonics business unit is one of the eight technology business units in the company and operates across Europe including the UK, Germany, France, Benelux, Italy, Spain and the Nordic region. It supplies a range of products that address the Photonics market including: lasers & laser diode modules, scanning technologies and marking heads, optical components & filters, spectrometers and spectrophotometers/colorimeters, laser beam diagnostic and detection modules. Acal BFi Photonics has the capability to supply stand alone units as well as OEM components or sub-modules to meet specific customer needs. Proof of concept & demonstrations, training, installations, repair and calibrations are also part of the custom services Acal BFi offers. www.acalbfi.com 
Acreo Swedish ICT provides cutting edge resources and technologies within Sensors and Actuators, Power Electronics, Digital Communication and Life Science. Expertise areas include fiber optics, nanoelectronics, broadband technologies, printed electronics and sensor systems. Acreo Swedish ICT has 145 employees in Kista, Gothenburg, Norrköping and Hudiksvall. Acreo is a part of Swedish ICT. www.acreo.se Funded Research Projects Experience . 
AEMtec develops, qualifies and manufactures next level optoelectronic assemblies in compliance with highest quality, security and sustainability standards. In a cleanroom environment (ISO class 5 to 8) AEMtec offers a unique spectrum of high-end chip-level technologies: Wafer Back-End Services (UBM, SBA, Dicing), high speed / high accuracy Die- and Flip Chip Bonding, Au and Al Wire Bonding, SMT, assembly of Optical Components, Box-Build, 3D integration. AEMtec is certified for the automotive, aerospace and medical industries. www.aemtec.com 
Advanced Fibreoptic Engineering Ltd (AFE) designs and manufactures fibreoptic solutions to meet specific customer requirements. We specialise in high performance products and can supply prototypes through to high volume. We package a wide range of active components including laser diodes, photodiodes, LEDs, avalanche photodiodes and can provide receptacles, fibre pigtailed components together with bidirectional modules, laser combiners etc. We also have assembly capabilities combining 3D design tools, electronics design, fibre splicing, fibre termination, environmental testing and our own mechanical workshop. We supply market leaders in instrumentation, telecommunications and sensors. We are actively seeking new markets where we can further develop our technology. www.afe-uk.com 
Advanced Packaging Center (APC) is a one-stop-shop supplier for full packaging development solutions (die-attach or sintering/wire-bond/molding), as well as low-mid volume production for semiconductor-, sensor- and medical/optical devices (including MEMS, LEDs and SiP/SoC). We focus on large, complex or advanced packages of low-mid volume with large flexibility or added-value. APC provides Consultancy, Package development and/or tool design/development, Sample workshop service (functional samples), Package production service and support, In-house production (low-mid size volumes). www.APCenter.nl 
Advanced-Vacuum develops cost-effective, custom vacuum solutions, including reliable plasma etch and deposition systems. The space industry relies on the company’s expertise for high-performance, thermal/vacuum environmental test chambers. Advanced Vacuum’s trusted platforms meet specialized needs for critical R&D, prototyping, and low-volume production in diverse fields, from semiconductors and materials science to component testing and failure/yield analysis. In 2011, Plasma-Therm acquired Advanced Vacuum, which was founded in Sweden in 1993. www.advanced-vacuum.com 
Agfa HealthCare, a member of the Agfa-Gevaert Group, is a leading global provider of diagnostic imaging and healthcare IT solutions. The company has nearly a century of healthcare experience and has been a pioneer on the healthcare IT market since the early 1990's. Today Agfa HealthCare designs, develops and delivers state-of-the-art systems for capturing, managing and processing diagnostic images and clinical/administrative information for hospitals and healthcare facilities, as well as contrast media solutions to enable effective medical imaging results. The company has sales offices and agents in over 100 markets worldwide. www.agfahealthcare.com 
Aifotec offers significant and industry-proven experience in a variety of Photonic Development Services and Photonic Manufacturing Services as used in today’s CMOS photonics applications. Aifotec’s Hybrid Integration Technology experience allows packaging solutions across leading-edge process benches such as glass, ceramic, polymer and silicon, using either laser bonding, as well as different gluing technologies. In addition to this know-how Aifotec provides the equipment for the handling as well as packaging of material from single-die attachment, flip-chip on 6 to 8 inch wafers and pigtailed optical subassemblies. www.aifotec.com Funded Research Projects Experience .
AIMEN is a leading research centre in Materials and Process Engineering. Located in Northern Spain, it operates as private, non-profit organization to provide high tech services and resources to a wide range of industries, from automotive to energy or medical devices. The research activity of AIMEN is mainly focused in materials engineering, robotics and manufacturing processes, all oriented to industrial applications and advanced manufacturing. The Laser Applications Centre of AIMEN is a dedicated infrastructure for research and development in laser based manufacturing and industrial photonics. This 1200 m2 facility is equipped with state of the art laser-based manufacturing equipment. AIMEN conducts applied research in applications of machine vision and optical sensing, laser materials processing (thick section laser welding, cutting, surface treatment, precision laser machining, down to nanofabrication), together with system engineering and optical system development. AIMEN participates and coordinates multiple national and international research activities, both in publicly funded programs, or under industrial partnership. www.aimen.es. 
AIXaTECH is a volume manufacturer of single crystal AlN templates. The templates serve as starting layers for subsequent growth of GaN-based layers. Compared to the conventional manufacture via MOCDV, AIXaTECH’s templates allow an increased throughput and higher yield for customers active in the LED business. For customers reaching out for the next generation of power electronic devices the advantages lie in the retention of the silicon characteristics and the excellent price-performance ratio. Due to AIXaTECH’s patent portfolio the customers have the utmost design freedom without paying license fees to competitors. A future activity of AIXaTECH is the manufacture of single-crystal InGaN layers with high In-content to increase the efficiency of Si tandem solar cells by a double digit percentage. AIXaTECH was founded in 2010 as a spin-off of RWTH Aachen and is located in Baesweiler, Germany. www.aixatech.com 
AIXTRON is a provider of deposition equipment to the semiconductor industry. The company's technology solutions are used by a diverse range of customers worldwide to build advanced components for electronic and opto-electronic applications based on compound, silicon, or organic semiconductor materials, as well as polymers, carbon nanotubes, graphene and other nanomaterials. Such components are used in solid state lighting, fiber optic communication systems, wireless and mobile telephony applications, optical and electronic storage devices, computing, signalling and lighting, flat panel display applications, energy harvesting and storage as well as a range of other leading-edge technologies. www.aixtron.com 
Aledia is a developer of LEDs based on disruptive microwire GaN-on-Silicon technology, it manufactures LEDs on 8-inch (200mm) silicon wafers. The cost of Aledia’s LED 3D chips based on microwires is expected to be four times less than traditional planar (2D) LEDs. Aledia solves the important cost issue in the very large and growing LED market. The Aledia LED technology, made on large-size silicon wafers and with very low materials cost, represents a cost-disruptive solution. The technology is compatible with silicon CMOS technology and will be manufactured directly in existing high-volume silicon foundries. www.aledia.com 
Alpes Lasers is a one stop shop for laser sources in the mid-infrared, it is component manufacturer providing Quantum Cascade Lasers to integrators of chemical detection systems applied to markets as diverse as combustion monitoring, industrial security or medical diagnostic. The devices operate CW at room temperature with mW to W range powers single- or multi-mode and emit up to 3 to 23 microns. The company concentrates on design and quality assurance thanks to its fabless operation. www.alpeslasers.ch 
ALPhANOV is the Optics and Lasers technological center of the French Route des Lasers™ competitiveness cluster. Supported by the Aquitaine Region, it operates as a private, non-profit organization specialized in technology transfer in close collaboration with CEA/CESTA, CNRS, and the Bordeaux universities. ALPhANOV provides the technical resources and expertise required to fulfil the R&D challenge of innovative project in collaboration with SMEs and laboratories. Located in the Bordeaux area, ALPhANOV employs about 30 highly skilled Researchers, Engineers and Technicians. Its 700-m² facility hosts several dedicated technology platforms, specific laser and metrology systems available for projects in every field of optics and lasers. ALPhANOV conducts scientific research in photonic technology in collaboration with academic laboratories from the Bordeaux University. The Center’s expertise encompasses laser processing and micromachining, laser sources and optical fiber components, optical systems development and imaging. ALPHANOV is also currently involved in about ten laser technology-oriented national and European projects. www.alphanov.com 
Altechna is a supplier of laser related products and solutions, specializing in the following key activity fields: * Laser related components. * Distribution of well-known photonics industry brands in local markets. * R&D solutions in laser optics. * Manufacturing of laser related components. * Quality assurance and measurements to guarantee the highest quality. An investment by Venture Capital fund enabled Altechna to acquire Optida - optical coating company, thus currently Altechna offers customized and broad diversity optical coatings, including enhanced LIDT high dispersion chirped mirrors and broadband dispersive mirror pairs, ultra low loss mirrors and coatings for high laser power applications. www.altechna.com 
ALTER TECHNOLOGY is a quality driven company providing procurement, engineering and test services for E.E.E. (Electrical, Electronic and Electromechanical) components and electronic systems, within the space and harsh environment markets, where failure is not an option. ALTER TECHNOLOGY works in many markets including, but not limited to, Aerospace, Security, Transport, Emergency Services, Health & Safety and Automotive. www.altertechnology.com 
AMICRA Microtechnologies is a worldwide leading supplier of Die Attach Equipment specializing in submicron placement accuracy (+/- 0.5µm@3sigma). Equipment offering supports Die Attach and Flip Chip bonding processes including the following capability: in-situ eutectic bonding, dynamic alignment, heated tool, pulse heating, laser heating, volumetric and jet dispensing, active bond force control, high speed solutions, in-situ UV curing, 550x600mm bonding area, quantitative tilt calibration system, etc. Market focus: Opto, Silicon Photonics, AOC, VCSEL, Laser Diode, WLP, 2.5D/3D IC, TSV, TCB, Fan-out/EWLP. Other products include: High Speed Wafer Inking and inspection, Automated LED/LD Test & Sort Systems, Gel Fill Line and Custom Solutions. www.amicra.com/ 
AMO is a research service provider for nanofabrication with focused research & development, prototyping and contract manufacturing. AMO offers the entire infrastructure required for nanofabrication for semiconductor based applications and related technologies. AMO competences are nanofabrication, nanoelectronics, nanophotonics and biotechnology. Within many technical fields the employment of nanotechnology is enabling crucial improvements in product properties: Microelectronics is migrating to nanoelectronics and is creating largest storage densities and processor power – in the long term up to quantum devices. Thanks to new nanomaterials and manufacturing methods, integrated optics is developing into nanophotonics with the prospect of fast ”on chip“ optical data processing and the reduction of manufacturing costs. Nanostructures can now be manufactured in the size of biomolecules, thereby opening the possibility of highly exact analytical methods and the coupling of electronics with the biological world. The key to enter the nanocosm is the production technology for smallest structures. AMO’s tools are electrons, photons and economical printing processes (nanoimprint). www.amo.de Funded Research Projects Experience .
Amplitude Systemes develops and manufactures diode-pumped ultrafast solid-state lasers for scientific and industrial applications. Amplitude Systemes, together with its sister company Amplitude Technologies, is the only company which offers all ultrafast laser technologies available today, from industrial fiber lasers to high energy Petawatt class Ti:Sapphire lasers. Industrial application include: Analytical chemistry, Lab-on-chip, Ophthalmology, Medical devices, Micro-machining, Internal engraving. Scientific applications include: Cellular imaging, Pump-probe, Nano-surgery, Analytical chemistry, Lab-on-chip, Free Electron Lasers. www.amplitude-systemes.com Funded Research Projects Experience .
Amplitude Technologies produces robust and reliable, ultra-intense femtosecond laser systems with the best performances in accordance with pulse duration, temporal contrast and spatial beam quality. Our performances engagement continues after delivery and our close collaboration with the users guarantees that the laser system’s specifications are maintained for the whole duration of its operational lifetime. Key applications of our customers: high-field physics, particles acceleration, X-ray generation, ultrafast science, laser filamentation, laser for light sources and accelerators. www.amplitude-technologies.com 
AMS Technologies is a leading solution provider and distributor of high-tech, leading-edge components, systems and equipment, with almost 30 years of experience to date and currently serving more than 1000 European customers. Optical Technologies is our key competency field with the broadest and most widely varying product offering, ranging from optical components and systems for the most differing of applications, over cameras for machine vision and on to capital equipment for fiber optic applications. Coupled with our Thermal Management Engineering team focusing on Photonics cooling and temperature stabilization and our Power Technologies focus on Laser Drivers, TEC controllers and Power Supplies we enable and create custom Photonics Solutions. www.amstechnologies.com 
Andor Technology, incorporating Bitplane, is a global leader in the pioneering and manufacturing of high performance scientific imaging cameras, spectroscopy solutions, microscopy systems and 3D visualisation and analysis software for research and OEM markets. Andor’s low Light camera technologies include CCD, Electron Multiplying CCD (EMCCD), Scientific CMOS (sCMOS), Intensified CCD (ICCD) and X-ray detectors. Andor’s markets and applications include Raman spectroscopy, laser induced breakdown spectroscopy (LIBS), LIDAR, single molecule detection, astronomy, cell microscopy, cancer detection, drug screening, in vivo imaging, medical imaging, clinical diagnostics, point of care, ophthalmology, forensics, gene sequencing, hyperspectral imaging and security/defence. www.andor.com 
Anteryon Optical Solutions is a manufacturing company that provides innovative optical solutions from idea to end-of-life for industrial markets. Anteryon Optical Solutions is founded in 2006 as a spin-off from Philips Electronics. Most of its core technologies originate from the 1980’s when it was still part of Philips. Anteryon Optical Solutions designs, manufactures and tests optical components and sub-assemblies for industrial markets. It is in our DNA to be involved from the idea and be a catalyst in the innovation process of our customer. Our vision is “To be the preferred partner for Optical Solutions in BtB markets”. Our core competences are clustered into three groups: replication of optical structures, structuring glass and ceramics, and assembly. Our solution always starts with a challenge that centers around optics. www.anteryon.com 
Yüklə 429,78 Kb. Dostları ilə paylaş:
|