General requirements

075343 Paneled wood doors

• 
  Comply with the requirements of Specification 075342 except for the following:
  

• 
  Where plywood or other panels are used in place of glazing, the rails shall be rebated to the thickness of the panels. The panels shall be tightly fixed into the frame.
  

075344 Match boarded doors

Match boarded doors shall be produced from specified timber or timber approved by the Engineer and complying with the requirements of Specification 07431.

Match boarded doors shall be supplied assembled. Doors shall be produced as detailed in drawings. The sides, top, bottom and intermediate rails of match boarded doors shall be mortised and tenoned.

Rails shall be produced from single width timber. Unless provided otherwise in drawings, the un-rebated sizes of rails shall not be less than 40mm thick and 100mm or such width required to insert locks.

Match board panels shall be tongued and grooved boards not less than 20mm thickness and 80mm width. The panels shall be tightly and neatly tongued and grooved and securely glued or secretly nailed to grooves in the intermediate rails.