07537 Sundry
075371 Balustrades & rails
Balustrades and rails shall be produced from specified milled timber complying with the requirements of Specification 07431 and not less than 25mm finished thickness.
Balustrade and rails shall be machine smoothed, accurately shaped, molded and grooved prior to installation.
All edges of rails shall be finished round molded. Balustrades and rails shall be securely screwed or bolted to supports. The supports shall be embedded in walls or other structure as detailed in drawings. Where balustrades and rails are to be in timber, the balustrades and rails shall be mortised and tenoned and securely glued.
Anchors to rails and balustrades are dealt with in Section 10.
Paints to rails and balustrades are dealt with in Section 12.
Dostları ilə paylaş: | 
