| 06323 Galvanized plain steel sheet accessories
Galvanized steel plain sheet accessories like ridge caps, gutter, down pipes, flashing, copping, edge trims, corner moulds, and return, etc shall comply with the requirements of Specification 062423 for material standards.
Galvanized plain steel sheet accessories shall be formed and fabricated in accordance with the details in the drawings or shop drawings approved by the Engineer.
The sheets shall always be cut to the maximum possible length to keep the number of joints to the minimum possible. Where the over lapping of sheets is unavoidable, the edges shall be over lapped a minimum distance of 150mm and welded/soldered.
Dostları ilə paylaş: |
