072 GENERAL REQUIREMENTS
0721 WORK INCLUDED
Provide all carpentry and joinery timber, laminated panels, fixing devices paints, posts, glue and other material necessary for a complete and satisfactory fabrication and installation of carpentry and joinery work.
0722 RELATED WORKS DESCRIBED ELSEWHERE
Masonry works Section 04
Hardware (Iron mongery) Section 08
Metal work Section 10
Painting Section 12
Glazing Section 13
073 QUALITY ASSURANCE
0731 STANDARDS
Comply with the following standards.
ES.C.D1.101 Chip boards, ESI.
ES.C.D1.103 Plywood, ESI.
BS 3444 Block Board & Laminboard
ES.G.B4.120 Nails, ESI
BS 1210 Wood screws
BS 1204 Synthetic resin adhesives
ES.C.D3.501 Asbestos cement sheets
0732 QUALIFICATION OF WORKMEN
Throughout the progress of the work, provide at least one person, each for Carpentry and Joinery who are thoroughly familiar with the specified requirements, fully trained and experienced in the necessary skills and who shall always be present at the place of work and direct all workmen in the selection of materials, preparation, fabrication, installation and cleaning.
0733 SUBMITTALS
Submit product data for approval by the Engineer well before fabrication of carpentry and joinery indicating the following.
Proposed type of timber posts and laminated panels to be used for carpentry and joinery.
Proposed methods of impregnating timber & posts.
Proposed place of fabrication of joinery.
Shop drawings of joinery work showing general arrangement, details of construction and materials, jointing, finishing and other related details.
0734 PROTECTION
Protect carpentry & joinery material from breakage, warping surfaces scratch and other damage during transport and storage.
Protect installed carpentry & joinery work from damage by work on other trade.
Dostları ilə paylaş: |