| 075342 Glazed wood doors
Glazed wood doors shall be produced from specified timber or timber approved by the Engineer complying with Specification 07431.
Glazed wooden doors shall be supplied and assembled unless supply in knock down form is approved by the Engineer.
Doors shall be produced as detailed in drawings. The side, top, bottom & intermediate rails shall be mortised and tenoned. Rails shall be produced from single width timber. Unless provided otherwise in drawings, the un-rebated sizes of rails shall not be less than 40mm thick and 100mm or such width required to insert locks.
Doors shall be rebated and notched for iron mongery. Notches on doors shall not extend beyond 10mm of the edge of the panel. If the iron mongery requires notching beyond this limit, flat metal lining shall be provided to the inner faces of the notched part in the depth and length of notching.
Notches shall be formed only after iron mongery has been examined and trial fitted on sample door.
Doors shall be rebated for glazing and beads temporarily pinned to the doors. Doors shall be hinged to frames at locations showing in schedules.
Dostları ilə paylaş: |
