& DIVISIONS 20mm thick edge lipped block board with exposed faces in plywood.
REAR SIDE
& TOP Unless the detail requires that, the finished face of tops, rear and sides be left as painted wall, cupboard shall be lined with 6mm exposed face smooth finished plywood. The plywood shall be securely screwed to walls.
DRAWERS Front and sides of drawers shall be built in 20mm thick milled timber. The bottom of the drawer shall be block board not less than 20mm thick. The rear shall be plywood or hard board not less than 6mm in thickness.
Unless drawer handles or knobs are indicated in the schedule, the front of the drawers shall be notched for handle. Drawers shall have milled timber, plastic or metal guide rails to each side.
Milled timber, metal or plastic drawer stopper shall be provided at the rear.
Sided box built in 20mm thick block board with the upper face finished smooth. The box shall be produced independent of the cupboards and securely fixed to cupboard timber frames.
SHELVES Shelves shall be produced in finished thickness 20mm block board with the upper face finished smooth. All edges of the block board shall be lipped in hardwood showing 10mm on face.
Shelves shall be supported on hard wood, metal or plastic supports securely screwed or nailed to the cupboard frame and divisions and capable of taking the load from the shelf.
