PANEL Door panels shall be 20mm thick block board lipped on all edges. The face panel shall be smooth. Door panels shall be rebated for iron mongery and notched for locks and handles. Metal or plastic guide rails fixed to bottom and top frames shall be provided for sliding door panels. Doors panels shall be finished flush with surface or over lapping frame.
ARCHITRAVE Architraves shall be in milled timber molded as approved by the Engineer, but not showing less than 50mm on face. Corner architrave molded to triangular face may show only 35mm on face.
SKIRTING Skirting shall comply with the requirements of Specification 075332.
Skirting shall be securely nailed or screwed to cupboard frame. Nails and screws shall be punched and stopped. Skirting may alternately be built as the bottom supporting frame, lifting bottom of cupboard, 100mm above finished floor but finished at recessed least 10mm from the face of the cupboard.
