Heatlok 0240 and / or airmétic 0223



Yüklə 46,09 Kb.
səhifə1/7
tarix10.01.2022
ölçüsü46,09 Kb.
#100678
  1   2   3   4   5   6   7

(FIRM) (old 07216) Section 07 21 19

Spray-in-Place Urethane Foam Insulation page /6

(project) HEATLOK SOYA /POLARFOAM SOYA 2014-11-17


HEATLOK SOYA/POLARFOAM SOYA
Note: This specification should be adapted for each project. All notes are for guidelines only.

An updated .word version could be downloaded at www.demilec.com

PART 1- GENERAL


1.1. GENERAL

  1. Conform to sections of Division 01 xx xx as applicable.



1.2. WORK INCLUDED

  1. Spray application of polyurethane foam to provide insulation, air barrier and vapour barrier.


1.3. INCLUDED SECTIONS Note: Optional Amend to suit project

Supply and installation of transition strip membrane, thru wall flashing and primer material as required in accordance with sections 07 25 00 and 07 27 00.

Yüklə 46,09 Kb.

Dostları ilə paylaş:
  1   2   3   4   5   6   7




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin