Machine Translated by Google Entering command parameters

Through All
button ·
Click the
Create Object
button
~on the
Body Elements panel.
chosen correctly.
.
.
Machine Translated by Google

---

Machine Translated by Google

---

,
You need to build a blind threaded hole in the boss. For simple
cylindrical holes, you can use the Cut Extrude command~
·
Specify the face on which the hole will be placed.
and for holes of complex
shape - special commands for constructing holes of the KOMPAS-3D
system.
Let's build holes using special commands.
Constructing a hole
To construct various holes, grooves, grooves and other
structural elements in the KOMPAS-3D system, the use
of the Standard Products Directory is also provided.
Top
Threaded hole
Machine Translated by Google

---

Leave the parameters unchanged.
By default, Metric thread with coarse pitch GOST 24705-2004
is selected.
·Press Countersink Hole~
· Expand the Standard list and look at the ones installed in
~on the Body Elements panel
carving team. Pay attention to the Directory button, which
allows you to select a thread from the
Directory. · Select thread parameters from the drop-down lists:
(Simple hole group).
Diameter - 20, Pitch - 2.5. Set the thread length in the
Length field
to 25. · In the Hole group, set the value in the Distance field to
30. · In the Countersinking group, set Diameter to 21.5. Rest
· On the Options Bar, set the Thread switch to position I
(on).
Machine Translated by Google

---

Constructing fillets
· Hide the thread image. To do this, call the command
By default, the center of the hole is aligned with the sketch origin.
Top
Hide - Conventional thread images on the Quick Access
Toolbar.
· Click the Create object button
Model elements involved in an operation can be specified not only
during the operation, but also in advance.
This will not affect the thread images on the drawings.
.
· Click the Wireframe button on the Quick Access Toolbar.
· Click the Finish button.
If you first call the command and then specify a face, the
center of the hole will be located at the point of selection. In
this case, open the Placement section of the Options Bar and
enter a value of 0 in the Distance 1 and Distance 2 fields - offset
from reference objects to the center of the hole. The names of
reference objects are displayed in the Object fields.
Machine Translated by Google

---

·
Click the