Machine Translated by Google Entering command parameters

Fillet button~
~on the
Body Elements panel.
After this, all the edges of the model will become visible.
·
Release the
key.
The specified edges will be highlighted in
the graphics area.
·
Press and hold the key .
·
Specify the lug
ribs.
.
·
Enter a value of 7
in the
Radius
field. ·
Click the
Create Object
button
·
Round eight edges with a radius of 5.
If you have difficulty selecting edges, zoom in on the model
by rotating the mouse wheel or rotate the model in space,
for example, by “dragging” it with the mouse while holding
down the right key.
Machine Translated by Google

---

Next we will construct new fillets.
The figure shows the edges selected before calling the Fillet
command.
·
Click the
Fillet button~
~on
the
Body Elements panel.
Reset
the display mode
to Halftone with wireframe
.
bosses.
·
Specify a fillet radius of 2.
·
Specify edges 1 and 2 on the eyes and edge 3 at the base of the round
Machine Translated by Google

---

When you specify edge 3, all edges tangentially
connected to it become selected. This is ensured by enabling
the By Tangent Edges option on the Options Bar.
·
Click the
Create object
button
.
Machine Translated by Google

---

Machine Translated by Google

---

button