Top
Snaps are a mechanism that allows you to accurately set the
position of the cursor by selecting the condition for its positioning
(for example, at the nearest characteristic
point of an object,
in its middle, at the intersection of two objects, etc.).
KOMPAS-3D has two groups of bindings:
global and
local.
Global snaps are performed continuously during drawing.
You can view bindings and allow or disable the execution of
certain ones using the menu of the
Bindings
button
on the
Quick Access Toolbar.
·
Do not cover the sketch. Check out the bindings that can be used to
create it.
You may have different
vXX
variable
ordinal numbers
depending on the number of actions performed. For example, if
you deleted an object and rebuilt it, the variable will be assigned
the next number.
Using Bindings
Machine Translated by Google
Local snaps can be enabled manually during the drawing
process by clicking the button in the context menu called by
right-
clicking
the mouse. Their priority is higher than
the priority of global snaps, and
they are executed only when
specifying one (current) point or geometric object.
Clicking the
Bindings button itself allows you to disable
all global bindings, and then enable them again in the same
composition.
Machine Translated by Google
The snap icon appears in the
graphics area when you move
the cursor over an object while the build command is running.
The icons have the same appearance as the buttons to
enable them on the context panel.
For example, if you move the
cursor closer to the vertex of a line segment, the
Nearest point
icon appears next to the cursor .
The figure shows the most common bindings.
Triggered snaps may prevent you from selecting objects
correctly, for example if
you are working in a zoomed
out view. To temporarily disable bindings:
Machine Translated by Google
Top
solid element.
Additional requirements may also apply to sketches of specific
operations. For example, to create a solid extrusion feature,
all sketch outlines must be closed.
If at least one contour
in the sketch is not closed, a thin-walled
extrusion element is automatically created.
The figure shows errors when constructing a sketch
A general requirement for sketches is that the outline to
which the operation will be applied must be displayed with
the
Main line style. Lines of other styles will be ignored.
times or turn off the sketch mode button.
specifying and constructing objects
while holding down the
Dostları ilə paylaş: