Machine Translated by Google
Entering command parameters
Sketch
Creating and saving a file
Wireframe and halftone display
Model orientation
Merging points
Parametric mode
Material
Limitation Vertical and horizontal alignment
Definition of the sketch
Part properties
This lesson, using the Fork
part as an example ,
shows the use of extrusion, cutting, creating
fillets, chamfers and holes, as well as creating
patterns.
Lesson 1. Extrusion operation.
Model Fork
New in this lesson:
Machine Translated by Google
Extrusion operation
Offset plane
Chamfer
Auxiliary constructions
Threaded hole with countersink
Array on a concentric grid
Rounding edges
Bindings
Operation Cut by extrusion
Mirror array
Characteristic points
Machine Translated by Google
Machine Translated by Google
Creating a Part File
· If a document is already open in the system, click the button
The model file Fork_result.m3d with the construction result is located
in the folder C:\Program Files ...\Ascon\Kompas-3D\ [version]
\Tutorials\ABC KOMPAS-3D\1 Fork.
Let's create a new document - part.
Creating and saving a document
· In the New Document dialog, specify the type of document to be
created Part by clicking on the icon.
Top
New~ ~on the System panel or call the command File - New....
Machine Translated by Google
Top
The new document must be saved to a storage medium
in a specific folder and given a name - this will be discussed
later.
Dostları ilə paylaş: | 
