RECALL, SHIFT, ‘7’, ENTER Will recall the first half of the data stored for station 7 and generate the following display
:
68857.4 FIELD/TIME
007 STATION/DAY
While this field measurement and station number are displayed, pressing
TIME,
will
display the measurement’s time and line number (or Julian Day, if the reading was taken
in AUTO mode) as follows
:
12.32.00 FIELD/TIME
010 STATION/DAY
While you are in the second half of the memory line, you can still decrement or
increment by depressing
RECALL or
ENTER.
You can also view the field measurement
and station number by pressing the
FIELD key while the display is lit
Some other features of the RECALL function include:
There are two different methods of recalling the most recent station. You can: a)
attempt to recall a station number that is greater than the most recent one or: b)
press the
READ without subsequently storing the measurement. Pressing
RECALL after applying either of these methods will display the most recent
stored measurement.
Pressing and holding the
RECALL key (or the
ENTER key when in recall mode)
will automatically scroll the display backward (or forward) through memory.
This is a convenient means of quickly reviewing the measured field values.
8 - Erasing magnetometer readings The G-856AX will allow you to erase the last reading, the last group of readings, or the
entire memory.
1.
To erasing just the last reading press:
READ, RECALL, ERASE, ERASE
Geometrics, Inc
.
G-856AX Operation Manual
25
In this key sequence,
