Florida Department of Education Curriculum Framework


Florida Department of Education



Yüklə 423,21 Kb.
səhifə5/5
tarix07.01.2022
ölçüsü423,21 Kb.
#82453
1   2   3   4   5

Florida Department of Education

Student Performance Standards




Course Title: Building Construction Technologies 4

Course Number: 8720340

Course Credit: 1




Course Description:

The purpose of this course is to develop competencies in exterior finish carpentry.


Abbreviations:

FS-M/LA = Florida Standards for Math/Language Arts

NGSSS-Sci = Next Generation Sunshine State Standards for Science


CTE Standards and Benchmarks

FS-M/LA

NGSSS-Sci

  1. Install roofing materials--The student will be able to:













    1. Identify and explain different types of roofing systems and applications.







    1. Install various types of shingles.

MAFS.912.N-Q.1.1,2,3

MAFS.912.G-CO.2.6






    1. Install roof gutters and downspouts.







    1. Seal pipes and vents on roofs.







    1. Identify installation procedures for sheet metal roofs, built-up roofs and roof flashing.







  1. Install exterior finishes--The student will be able to:




SC.912.P.10.4







    1. Describe the purpose of wall insulation and flashing.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Install common cornices.

MAFS.912.N-Q.1.1,2,3




    1. Estimate lap and panel siding.

MAFS.912.N-Q.1.1,2,3

MAFS.912.G-CO.2.6

MAFS.912.G-GMD.2.4

MAFS.912.G-MG1.1,3






    1. Describe the types and applications of various types of siding (e.g. wood, fiber-cement, vinyl, metal, stucco, masonry, etc.).

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Install siding.

MAFS.912.N-Q.1.1,2,3




  1. Explain the importance of employability and entrepreneurship skills--The student will be able to:













    1. Identify and demonstrate positive work behaviors needed to be employable.







    1. Develop personal career plan that includes goals, objectives and strategies.

LAFS.1112.W.2.4

LAFS.1112.W.2.5






    1. Examine licensing, certification and industry credentialing requirements.







    1. Maintain a career portfolio to document knowledge, skills and experience.







    1. Evaluate and compare employment opportunities that match career goals.

LAFS.1112.W.2.4




    1. Identify and exhibit traits for retaining employment.







    1. Identify opportunities and research requirements for career advancement.

LAFS.1112.W.3.7




    1. Research the benefits of ongoing professional development.

LAFS.1112.W.3.7




    1. Examine and describe entrepreneurship opportunities as a career planning option.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4







2018 – 2019

Florida Department of Education

Student Performance Standards




Course Title: Building Construction Technologies 5

Course Number: 8720350

Course Credit: 1




Course Description:

The purpose of this course is to develop knowledge and skills in interior finish carpentry.


Abbreviations:

FS-M/LA = Florida Standards for Math/Language Arts

NGSSS-Sci = Next Generation Sunshine State Standards for Science


CTE Standards and Benchmarks

FS-M/LA

NGSSS-Sci

  1. Demonstrate interior carpentry skills--The student will be able to:




SC.912.P.10.4







    1. Install interior finish materials.

MAFS.912.N-Q.1.1,2,3




    1. Install exterior and interior doors.

MAFS.912.N-Q.1.1,2,3




  1. Install cabinets--The student will be able to:













    1. Identify the parts of a cabinet.







    1. Identify the types of cabinet-door installation.







    1. Identify the types of cabinet hardware.







    1. Install cabinet hardware.

MAFS.912.N-Q.1.1,2,3




    1. Describe cabinet-installation procedures.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





  1. Prepare and apply finishes to surfaces--The student will be able to:













    1. Erect an extension ladder and a scaffold.







    1. Prepare surfaces for finishes.







    1. Apply finished coatings to surfaces with a roller, brush and sprayer.







  1. Build stairs--The student will be able to:













    1. Identify various types and parts of stairs.







    1. Identify materials used in the construction of stairs.







    1. Interpret construction drawings of stairs.







    1. Calculate the total rise, the number and size of the risers and treads required for a stairway.

MAFS.912.N-Q.1.1,2,3

MAFS.912.S-ID.3.7

MAFS.912.G-SRT.3.8

MAFS.912.G-SRT.2.4






    1. Lay out and cut stringers, risers and treads.

MAFS.912.N-Q.1.1,2,3

MAFS.912.G-SRT.1.1








2018 – 2019

Florida Department of Education

Student Performance Standards




Course Title: Building Construction Technologies 6

Course Number: 8720360

Course Credit: 1




Course Description:

The purpose of this course is to develop knowledge and skills in plumbing.


Abbreviations:

FS-M/LA = Florida Standards for Math/Language Arts

NGSSS-Sci = Next Generation Sunshine State Standards for Science


CTE Standards and Benchmarks

FS-M/LA

NGSSS-Sci

  1. Troubleshoot, repair and install plumbing systems--The student will be able to:




SC.912.P.10.4







    1. Troubleshoot, repair and install bathroom fixtures and hardware such as lavatories, water closets, urinals, showers, bathtubs, traps and drain, waste and vent (DWV) systems.







    1. Troubleshoot, repair and install kitchen fixtures and hardware, such as sinks, garbage disposals, faucets and hot-water-heater tanks.







    1. Identify and install various pipes and tubing used in the plumbing trade.







    1. Test and inspect plumbing systems.







  1. Demonstrate knowledge of drain, waste and vent (DWV) systems-- The student will be able to:




SC.912.P.12.10







    1. Explain how waste moves from a fixture through the drain system to the environment.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Identify the major components of a drainage system and describe their functions.







    1. Identify the different types of traps and their components, explain the importance of traps and identify the ways that traps can lose their seals.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Identify the various types of drain, waste and vent (DWV) fittings and describe their applications.







    1. Identify significant code and health issues, violations and consequences related to DWV systems.







  1. Measure, cut and join plastic piping--The student will be able to:













    1. Research types of materials and schedules of plastic piping.

LAFS.1112.W.3.7




    1. Identify proper and improper applications of plastic piping.







    1. Research types of fittings and valves used with plastic piping.

LAFS.1112.W.3.7




    1. Identify and determine the kinds of hangers and supports needed for plastic piping.







    1. Apply the various techniques used in hanging and supporting plastic piping.







    1. Explain proper procedures for the handling, storage and protection of plastic pipes.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





  1. Properly measure, ream, cut and join copper piping--The student will be able to:













    1. Research the types of materials and schedules used with copper piping.

LAFS.1112.W.3.7




    1. Identify the material properties, storage and handling requirements of copper piping.







    1. Research the types of fittings and valves used with copper piping.

LAFS.1112.W.3.7




    1. Apply the techniques used in hanging and supporting copper piping.







    1. Identify the hazards and safety precautions associated with copper piping.








2018 – 2019

Florida Department of Education

Student Performance Standards




Course Title: Building Construction Technologies 7

Course Number: 8720370

Course Credit: 1




Course Description:

This course is designed to provide students with knowledge and skills for the installation, repair and replacement of electrical and heating, ventilation and air-conditioning (HVAC) systems.


Abbreviations:

FS-M/LA = Florida Standards for Math/Language Arts

NGSSS-Sci = Next Generation Sunshine State Standards for Science


CTE Standards and Benchmarks

FS-M/LA

NGSSS-Sci

  1. Troubleshoot, repair and install electrical systems--The student will be able to:

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3


SC.912.P.10.13, 14, 15, 16, 17







    1. Explain basic electrical theory.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Explain branch circuit systems.







    1. Calculate and select service-entrance equipment.







    1. Identify and explain Ground Fault Circuit Interrupter (GFCI) circuitry.







    1. Troubleshoot electrical systems, using testing and metering devices.







    1. Install electrical outlets, switches and light fixtures.







    1. Install and replace breakers and fuses.







    1. Identify types of wiring raceways.







    1. Wire a blower motor into an electrical supply.







    1. Test and inspect electrical systems.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Explain basic motor-control operation.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Describe rules for installing electric space heating and HVAC requirements.







  1. Demonstrate electrical safety--The student will be able to:













    1. Identify electrical hazards and how to avoid or minimize them in the workplace.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Explain safety issues concerning lockout/tag-out procedures, confined space entry, respiratory protection and fall protection systems.







    1. Develop a task plan and hazard assessment for a given task and select the appropriate personal protective equipment (PPE) and work methods.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Explain the Role of the National Electric Code and describe how to determine electric service requirements.







  1. Research the heating, ventilation and air-conditioning (HVAC) profession--The student will be able to:

LAFS.1112.W.3.7,8










    1. Research careers in the HVAC industry and the educational pathways (including apprenticeships) available.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Explain what the ‘Clean Air Act’ means to the HVAC profession.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Describe regulatory codes relevant to the HVAC industry.







  1. Maintain, repair and install heating, ventilation and air-conditioning (HVAC) systems--The student will be able to:

LAFS.1112.RI.1.1

SC.912.P.10.2, 4, 5;

SC.912.P.12.10









    1. Read and interpret HVAC plans and schedules.







    1. Explain heating and cooling principles and code requirements.







    1. Calculate heating and cooling loads using various methods.

MAFS.912.N-Q.1.1,2,3

MAFS.912.G-MG.1.2,3

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





    1. Explain the operation and types of the following heating methods: water, steam, forced air, gas, electrical components and heat pumps.







    1. Troubleshoot and repair a circulation pump, zone valves, burners, pilot lights and thermocouples in a heating system.







    1. Identify refrigerants.







    1. Determine a refrigerant level.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4






    1. Describe the proper procedures for descaling air-conditioner units.







    1. Troubleshoot, repair and replace air filters, drive belts and drain systems.







    1. Troubleshoot, repair and replace control systems.

LAFS.1112.W.3.7,8




    1. Research computer monitoring systems associated with heating, ventilation and air-conditioning (HVAC) control systems and air-quality management.

LAFS.1112.W.2.4

LAFS.1112.SL.2.4

LAFS.1112.RI.1.3





Additional Information




Laboratory Activities

Laboratory investigations that include scientific inquiry, research, measurement, problem solving, emerging technologies, tools and equipment, as well as, experimental, quality, and safety procedures are an integral part of this career and technical program/course. Laboratory investigations benefit all students by developing an understanding of the complexity and ambiguity of empirical work, as well as the skills required to manage, operate, calibrate and troubleshoot equipment/tools used to make observations. Students understand measurement error; and have the skills to aggregate, interpret, and present the resulting data. Equipment and supplies should be provided to enhance hands-on experiences for students.



Special Notes

The occupational standards and benchmarks outlined in this secondary program correlate to the standards and benchmarks of the postsecondary program with the same Classification of Instructional Programs (CIP) number.


MyCareerShines is an interactive resource to assist students in identifying their ideal career and to enhance preparation for employment. Teachers are encouraged to integrate this resource into the program curriculum to meet the employability goals for each student. Access MyCareerShines by visiting: www.mycareershines.org.

Career and Technical Student Organization (CTSO)

SkillsUSA is the intercurricular career and technical student organization for providing leadership training and reinforcing specific career and technical skills. Career and Technical Student Organizations provide activities for students as an integral part of the instruction offered.



Cooperative Training – OJT

On-the-job training is appropriate but not required for this program. Whenever offered, the rules, guidelines, and requirements specified in the OJT framework apply.



Accommodations

Federal and state legislation requires the provision of accommodations for students with disabilities as identified on the secondary student’s Individual Educational Plan (IEP) or 504 plan or postsecondary student’s accommodations’ plan to meet individual needs and ensure equal access. Accommodations change the way the student is instructed.  Students with disabilities may need accommodations in such areas as instructional methods and materials, assignments and assessments, time demands and schedules, learning environment, assistive technology and special communication systems.  Documentation of the accommodations requested and provided should be maintained in a confidential file.


In addition to accommodations, some secondary students with disabilities (students with an IEP served in Exceptional Student Education (ESE)) will need modifications to meet their needs.  Modifications change the outcomes or what the student is expected to learn, e.g., modifying the curriculum of a secondary career and technical education course.  Note: postsecondary curriculum and regulated secondary programs cannot be modified.
Some secondary students with disabilities (ESE) may need additional time (i.e., longer than the regular school year), to master the student performance standards associated with a regular Occupational Completion Point (OCP) or a Modified Occupational Completion Point (MOCP).  If needed, a student may enroll in the same career and technical course more than once.  Documentation should be included in the IEP that clearly indicates that it is anticipated that the student may need an additional year to complete an OCP/MOCP.  The student should work on different competencies and new applications of competencies each year toward completion of the OCP/MOCP.  After achieving the competencies identified for the year, the student earns credit for the course. It is important to ensure that credits earned by students are reported accurately.  The district’s information system must be designed to accept multiple credits for the same course number for eligible students with disabilities.

Additional Resources


For additional information regarding articulation agreements, Bright Futures Scholarships, Fine Arts/Practical Arts Credit and Equivalent Mathematics and Equally Rigorous Science Courses please refer to:

http://www.fldoe.org/academics/career-adult-edu/career-tech-edu/program-resources.stml



Yüklə 423,21 Kb.

Dostları ilə paylaş:
1   2   3   4   5




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin