Mutual recognition of general construction induction training cards



Yüklə 12,12 Kb.
tarix06.01.2019
ölçüsü12,12 Kb.
#90586

nt worksafe

Bulletin

Mutual recognition of general construction induction training cards

This information bulletin provides a guide to mutual recognition of interstate general construction induction training cards (White Card).

A white card that was issued under a corresponding WHS law (and remains valid) will be recognised under Regulation 318 of the Work Health and Safety (National Uniform Legislation) Regulations.

The White Cards listed in this bulletin are examples of interstate cards that are valid in the Northern Territory.

The examples in this bulletin may not be comprehensive, please contact the interstate authority if you wish to confirm the validity of an interstate card.

It is important to note the following:



  • Mutual recognition is of White Cards only and does not extend to mutual recognition by jurisdictions of trainers or the delivery of training

  • A person conducting a business or undertaking (PCBU) must ensure that task induction and site–specific induction training is undertaken as required under Regulation 39 of the Work Health and Safety (National Uniform Legislation) Laws.

Tasmania


Tasmanian white cards are recognised by NT WorkSafe. The card must include the following information:

photograph of front and back of sample card tasmania



Queensland


Queensland white cards are recognised by NT WorkSafe. The cards must include the following information:

photograph of front and back of sample card queensland

Queensland blue cards continue to be valid and recognised in Queensland, therefore these cards are also recognised by NT WorkSafe. The cards must include the following information:



  • Issue date, card number and RTO name/number

  • Name and signature of the cardholder.

sample front and back of queensland blue card

South Australia


South Australian white cards are recognised by NT WorkSafe. The card must include the following information:

  • Issue date and card number

  • Name, date of birth and signature of the cardholder.

front and back of sample south australia wite card

Australian Capital Territory


ACT white cards are recognised by NT WorkSafe. The cards must include the following information:

  • Issue date, card number and RTO number

  • Name, date of birth and signature of the cardholder.

Caption: Sample ACT construction induction card (from 1 January 2012)

front and back of sample act construction induction card (from 1 january 2012)

Caption: Sample ACT construction induction card (1 September 2009 – 31 December 2011)

front and back of sample act construction induction card (1 september 2009 – 31 december 2011)

Western Australia


Western Australia white cards are recognised by NT WorkSafe. The cards must include the following information:

  • Issue date and card number

  • Name and signature of the cardholder.

front and back of sample white card - western australia

Western Australian (CSAT) cards were issued by the WorkSafe Western Australia Commission for Occupational Safety and Health. These cards are also recognised by NT WorkSafe. The cards must include the following information:



  • Issue date and card number

  • Name and signature of the cardholder.

front only of sample western australian (csat) card

Victoria


Victorian white cards are recognised by NT WorkSafe. The cards must include the following information:

  • Issue date and card number

  • Name, date of birth and signature of the cardholder.

front and back of sample white card - victoria

Victorian red cards issued prior to 1 July 2008 are recognised by NT WorkSafe. The cards must include the following information:



  • Issue date, card number and name of RTO/Training Provider

  • Name and signature of the cardholder.

front and back of sample red card - victoria

New South Wales


NSW white cards are recognised by NT WorkSafe. The cards must include the following information:

  • Issue date, card number and RTO number

  • Name, date of birth and signature of the cardholder.

front and back of sample nsw construction induction card (from 1 january 2012)

Caption: Sample NSW construction induction card (from 1 January 2012)

front and back of sample nsw construction induction card (1 september 2009 – 31 december 2011)

Caption: Sample NSW construction induction card (1 September 2009 – 31 December 2011)

front and back of sample nsw construction induction card (29 march 2004 – 31 august 2009)

Caption: Sample NSW construction induction card (29 March 2004 – 31 August 2009)

Contact us


For further information please contact us on 1800 019 115, via email at ntworksafe@nt.gov.au or go to the NT WorkSafe website at www.worksafe.nt.gov.au



Yüklə 12,12 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin