RD0169 (A) KF730 & SB730 OWNER’S MANUAL Page 19 of 28
6.5 PALLETS
6.5.1
KF730 Face Pallet
The KF730 Face Pallet is a wheeled pallet that holds two KF730s face down. Routing on the
underside of the pallet allows stacking loaded pallets two high. Except for the first enclosure
attached to the Fly-Bar, the enclosures remain on the pallet when attaching them to an array. The
lip around the outside edge helps prevent the enclosures from sliding off the pallet. The pallets
outside dimensions of 30 in x 22.5 in are a standard road case size that fits on small truck ramps
and simplifies truck packing by integrating easily with standard road cases.
6.5.2 SB730
Pallet
The SB730 Pallet is a wheeled pallet that holds two stacked SB730s. Normally the enclosures
stay on the pallet when attaching them to the Fly-Bar or other SB730s for suspension. The lip
around the outside edge helps prevent the enclosures from sliding off the pallet. The pallet’s
outside dimensions of 30 in x 22.5 in are a standard road case size that fits on small truck ramps
and simplifies truck packing by integrating easily with standard road cases.
6.6
INITIAL RIGGING PREPARATION
Proper preparation of the KF730s, SB730s, and the KF730 Fly-Bar will make it easier to
assemble, disassemble, and transport suspended or ground-stacked KF730s and SB730s. This
preparation should be followed as standard procedure for all future uses. It results in everything
being ready for transport or for assembling an array.
Dostları ilə paylaş: 
