Pesa09 Programme



Yüklə 121,8 Kb.
tarix12.08.2018
ölçüsü121,8 Kb.
#69714

PESA09 Programme and Venue

Day 1 20 May 2009 (Wednesday)
13:00-14:00 Conference Registration

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


14:00-16:30 R&D Centre Tour

Power Electronic Research Centre, PolyU

Hong Kong Productivity Council

Automobile Parts and Accessory Systems R&D Centre

Gathering at Podium Floor, Core Y, Lee Shau Kee Building, PolyU


17:00-18:00 Welcome Drink and Conference Registration

Podium Floor, Core Y, Lee Shau Kee Building, PolyU



Day 2 21 May 2009 (Thursday)
08:45-09:00 Conference Registration

Chiang Chen Studio Theatre, PolyU


09:00-09:15 Opening Ceremony

Dr. Kitty Poon, Under Secretary for Environmental Bureau

Chiang Chen Studio Theatre, PolyU


09:15-09:35 Keynote Speech 1

Sustainable and Economic Energy Mix Possibilities for Power Generation in 2030 and Beyond

Mr. Frederic Maury, MD, TÜV SÜD Hong Kong

Chiang Chen Studio Theatre, PolyU


09:35-09:55 Keynote Speech 2

The EV Market in China

Mr. Xi Xian Niu, Zhong Xing Auto

Chiang Chen Studio Theatre, PolyU


09:55-10:15 Keynote Speech 3

Control Technologies in Distributed Generation System Based on Renewable Energy

Prof. Wu Jie, South China University of Technology

Chiang Chen Studio Theatre, PolyU


10:15-10:45 Live Discussion Forum

Thing We Don’t Know about EVs to Market

Interviewed by Mr. Adrian Brown, Media Journalist from Australia, SBS Channel

Chiang Chen Studio Theatre, PolyU


10:45-11:15 Coffee Break

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


11:00-12:45 Parallel Sessions 1A, 1B, 1C, 1D and 1E



3rd Floor, Core Y, Lee Shau Kee Building, PolyU

Session 1A Electric Vehicle I
39. Experimental Driving System for Electrical Vehicle with Switched Reluctance Motor

J.K. Lin, K.W.E. Cheng, Z. Zhang, X.D. Xue

Department of Electrical Engineering, the Hong Kong Polytechnic University
47. A Novel Outer-Rotor Permanent-Magnet Flux-Switching Machine for Urban Electric Vehicle Propulsion

Patrick C.K. Luk, W.Z. Fei, J.X. Shen, Y. Wang

Engineering Systems Department, DCMT, Cranfield University
48. Study and Simulation of one Bi-directional DC/DC converter in series Hybrid Electric Vehicle

J.M. Hu, Y.R. Yuan, Z.J. Yang

School of Electric Power, South China University of Technology



109. Battery Management System and Control Strategy for Hybrid and Electric Vehicle

B.P. Divakar, K.W.E. Cheng, H.J. Wu, J. Xu, H.B. Ma, W. Ting, K. Ding, W.F. Choi, B.F. Huang, C.H. Leung

Department of Electrical Engineering, the Hong Kong Polytechnic University

Shanghai Jiao Tong University

Automobile Parts and Accessory Systems R&D Centre
123. Towards a Brain-Computer Interface Based Control for Next Generation Electric Wheelchairs

S.Y. Cho, A.P. Vinod, K.W.E. Cheng

Forensics and Security Lab, School of Computer Engineering, Nanyang Technological University
129. Design and Simulation of a Testing Fixture for Planar Magnetic Levitation System Control Using Switched Reluctance Actuator

N.C. Cheung, Z.G. Sun, S.W. Zhao, W.C. Gan

Department of Electrical Engineering, the Hong Kong Polytechnic University

R&D Motion, ASM Assembly Automation Ltd., Hong Kong



Session 1B Alternative Energy I
5. Minimization of Current Stress on the Grid Synchronization of Doubly-fed Induction Generators for Wind Power Generation

K.C. Wong, S.L. Ho, K.W.E. Cheng

Department of Electrical Engineering, the Hong Kong Polytechnic University
11. Towards a Brain-Computer Interface Based Control for Next Generation Electric Wheelchairs

S.Y. Cho, A.P. Vinod, K.W.E. Cheng

Forensics and Security Lab, School of Computer Engineering, Nanyang Technological University

Department of Electrical Engineering, the Hong Kong Polytechnic University
17. Semi-physical Experiment Platform for Wind Power Generation

X.H. Qiu, J. Wu

School of Electric Power, South China University of Technology



26. Distributed Wind-photovoltaic Power System Based on Multi-agent

H.X. Guo, J. Wu, L.M. Gao, L.F. Kong

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
31. The Fault-tolerant Technique in the Rotor Current Controller in Induction Wind Generator

J.H. Wu, G.X. Yao

School of Electric Power, South China University of Technology
125. A 200kW Wind Turbine Power Chain

Y.T. Chang, K.W.E. Cheng, J.K. Lin

Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 1C Inverter & PWM Techniques

55. Study on Electric Vehicle In-Wheel PM SPWM Control Technology

L.Y. Kang, Z.F. Lu, T. Yoshida, Z.Q. Yang

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
65. Minimization of Heat in theSstator Windings of a 3 Phase Induction Motor Using SPWM Technique–An Experimental Study

Manjesha, J. Balakrishanan

Department of Electronic Science, Bangalore University
71. Minimization of Switching Frequency Using Dynamic Sector Detection for a Three-Phase Four-Leg VSI Topology to Compensate Nonlinear Load under Unbalanced and Distorted Supply Voltages

N. Prabhakar, M.K. Mishra

Electrical Engineering Department, Indian Institute of Technology Madras



81. Research on Control Strategy for Three-Phase PWM Voltage Source Rectifier

H.W. Wang, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
90. A Novel Single-Phase Voltage Sag Restorer with Diode-clamped Multilevel Bridge

D.Kai, K.W.E. Cheng, X.D. Xue, B.P. Divakar, S.X. Wang, C.D. Xu, D.H. Wang

Department of Electrical Engineering, the Hong Kong Polytechnic University
111. Analysis and Comparison of Three Implementation Methodologies for High-Resolution DPWM

Y.X. Gao, S.F. Zhang, Y.P. Xu, S.B. Guo

School of Mechanical & Electronic Engineering and Automation, Shanghai University
Session 1D Power Converter I

14. Development of Fuzzy controller for ZCS Quasi-Resonant LUO converter

A.Joseph Basanth, S.P. Natarajan, T.S. Sivakumaran

Research Scholar, Department of Instrumentation Engineering, Annamalai University
15. Novel Cuk Circuit and Its Application in Photovoltaic System

M. Zhang, F. Wang

Department of Automation, Guangdong University of Technology
16. FPGA–based DPWM for Digitally Controlled DC-DC High Frequency Switching Mode Power Supply

Y.X. Gao, S.B. Guo, X.F. Lin-Shi, B. Allard

Shanghai University

INSA de Lyon
25. The Topologies of White LED Lamps' Power Drivers

Y. Liu, J.M. Yang

New Energy Center, School of Electrical Power, South China University of Technology
103. Power Factor K-factor in the Analysis of Dc-dc Converters

B.P. Divakar, K.W.E. Cheng, Z.H. Shi, K.F. Kwok

Department of Electrical Engineering, the Hong Kong Polytechnic University
115. Passivity Based Control Based on Storage Energy for DC converters

Z.H. Shi

Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 1E Power System I

35. Cooperative Reinforcement Learning Algorithm to Distributed Power System Based on Multi-Agent

L.M. Gao

School of Electrical Power, South China University of Technology
37. A Significant Scheme of Distributed Generation System Using Wind/Solar/Diesel Applying in Islands

Y.L. Shen

Institute of Power Electronics & Control Technology, Yat-Sen University

Guangzhou Institute of Energy Conversion, Chinese Academy of Science
73. The Distributed Control of Autonomous Microgrid Based on Voltage

W. Liu, M. Liu

Guangdong University of Technology
86. Construction, Operation and Control of a Laboratory-Scale Microgrid

Y.B. Che, Z.G. Yang, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University

12:45-14:00 Complimentary Lunch



Lunch speak by Hong Kong Science and Technology Parks

5th Floor, Communal Building, PolyU


14:00-15:30 Parallel Sessions 2A, 2B, 2C, 2D and 2E

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


Session 2A Electric Vehicle II
2. Review on the Configurations of Hybrid Electric Vehicles

Edward W.C. Lo

Department of Electrical Engineering, the Hong Kong Polytechnic University
69. A Hybrid Approach to Optimal Electric Drive Train Design.

S. Gupta, M. Patil

Hero Electric

74. Study of Motoring Operation of Switched Reluctance Motor Drives for Electric Vehicles

X.D. Xue, J.K. Lin, Z. Zhang, T.W. Ng, K.F. Luk, K.W.E. Cheng, N.C. Cheung

Department of Electrical Engineering, the Hong Kong Polytechnic University
94. Development of Electric Vehicle with Advanced Lighting System and All Electric Drive

C.K. Chan, K.W.E. Cheng, S.L. Ho, T.M. Fung

Department of Electrical Engineering, the Hong Kong Polytechnic University
113. The Electromagnetic Field Analysis of PMSM Used for Hybrid Electric Vehicle

X.Y. Wang, W.G. Gu

School of Electrical Engineering & Automation, Tianjin University
122. Promoting the Wider Use of Electrical Vehicles in Hong Kong: A Strategic Proposal

T.C. Lee, S.C. Michael Wong

Transport Design Lab, School of Design, the Hong Kong Polytechnic University
Session 2B Alternative Energy II
3. Steady-State Analysis of a Self-Excited Six-Phase Induction Generator for Alternate Renewable Energy Generation

G.K. Singh, A. Senthil Kumar, R.P. Saini

Department of Electrical Energy, Indian Institute of Technology


4. The Performance Research of Large Scale Wind Farm Connected to External Power Grid

J.M. Yang, H.P. Li

School of Electric Power, South China University of Technology
36. Research on an Improved Control Strategy in Current-controlled Switched Reluctance Generators

Y.J. Bao, K.W.E. Cheng, B.P. Divakar

Department of Electrical Engineering, the Hong Kong Polytechnic University
66. Steady State Analysis and Control of Wind Turbine Driven Double-Output Induction Generator

B. Chitti Babu, K.B. Mohanty, C. Poongothai

Department of Electrical Engineering, National Institute of Technology Rourkela
75. Prediction of Wind Power Generation Based on Time Series Wavelet Transform

L. Dong, L.J. Wang, Y. Gao, X.Z. Liao

Department of Automatic Control, Beijing Institute of Technology
Session 2C Machine & Motion I
44. Dual Closed Loop Controller of Bus Stepper Motor Based on Back-EMF

J.F. Liu, K.W.E. Cheng

Department of Electrical Engineering, the Hong Kong Polytechnic University
53. Design and analysis of a DSP-based Linear Switched Reluctance Motor

J.F. Pan, N.C. Cheung, G.Z. Cao, L.M. Lin

Department of Electrical Engineering, the Hong Kong Polytechnic University

54. Design and analysis of a novel X-Y table

J.F. Pan, N.C. Cheung, G.Z. Cao, H. Qiu

Department of Electrical Engineering, the Hong Kong Polytechnic University

58. Design of Maglev Ball Control System Based on TMS320F2812

G.Z. Cao, H. Qiu, L.M. Lin, J.F. Pan

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
91. Design of the Temperature and Humidity Instrument Based on 1-wire Sensor for Electric Vehicle Motors

S.X. Wang, K.W.E. Cheng, K. Ding

Department of Electrical Engineering, the Hong Kong Polytechnic University
119. Speed Control of DC Motor Using Fuzzy Logic

H.F. Ho, K.W.E. Cheng

Department of Electrical Engineering, the Hong Kong Polytechnic University
121. Computation of the In-Wheel Switched Reluctance Motor inductance using Finite Element Method

T.W. Ng, K.W.E. Cheng, X.D. Xue

Department of Electrical Engineering, the Hong Kong Polytechnic University

Session 2D Power Converter II
28. Low Cost High-Side Gate Drive Power Supply for Switched Reluctance Machines

K.F. Wong, K.W.E. Cheng, S.L. Ho

Department of Electrical Engineering, the Hong Kong Polytechnic University
33. A DC-DC Converter Used as a Light Dimmer for Compact Fluorescent Lamps

Dillian T.P. Wong, Martin H.L. Chow, C.K. Li

Department of Electronic & Information Engineering, the Hong Kong Polytechnic University
43. Simulation and DSP Based Implementation of Conventional Controller for Double Output Elementary LUO Converter

A. Joseph Basanth, S.P. Natarajan, T.S. Sivakumaran

Research scholar, Department of Instrumentation Engineering
102. Modeling and Simulation of DC / DC Converters Base on Double-loop Control

J. Liu, P. Yang, X.C. Lin, S.X. Zhou

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
116. Nonlinear Phenomena of the Buck-boost Converter Analyzed by Storage Energy

C.D. Xu, K.W.E. Cheng, Z.H. Shu, K. Ding

Department of Electrical Engineering, the Hong Kong Polytechnic University
127. LED Lighting Circuit and Thermal Design for Intelligent Clothing

K.W.E. Cheng, K.F. Kwok

Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 2E Vehicular Technology & Green Technology II
32. Research of Heat Source Analysis of Communication Engine-room and Cold Configuration

Y. Xiao, P. Yang

School of Electric Power, South China University of Technology

63. Development of a Novel Instrument Based on DSP for Measuring Vehicle Noise Combined with Engine Rotating Speed

X.Y. Lei, G.Z. Cao, X. Wang

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
70. 15 kW Induction Cooker

Y. Lu, K.W.E. Cheng, K.W. Chan

Department of Electrical Engineering, the Hong Kong Polytechnic University
77. PLC and Configuration Software Based Supervisory and Control System for Oil Tanks Area

X. Chen, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
93. Simulation of the Control Method for the Adaptive Front Lighting System

C.K. Chan, K.W.E. Cheng, S.L. Ho, T.M. Fung

Department of Electrical Engineering, the Hong Kong Polytechnic University
120. Heating Performance Improvement and Field Study of the Induction Cooker

L.C. Meng, K.W.E. Cheng, K.W. Chan

Department of Electrical Engineering, the Hong Kong Polytechnic University

15:30-18:00 Travelling to Hong Kong Science and Technology Parks



Exchange at HKSTP Networking

Event with Cocktail Reception

Electric Vehicle Demonstration & Test Drive

Gathering at ground floor, Core Y, Lee Shau Kee Building, PolyU


18:00-20:00 Conference Dinner

Hong Kong Science and Technology Parks



Day 3 22 May 2009 (Friday)
08:45-09:00 Conference Registration

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


09:15-09:45 Keynote Speech 4

Recent Developments on Electric Vehicle

Prof. Ka-wai Eric Cheng, Department of Electrical Engineering, the Hong Kong Polytechnic University

Chiang Chen Studio Theatre, PolyU

09:45-10:15 Keynote Speech 5

Opportunities and Challenges to Power Electronics Industry in Alternative and Renewable Energy

Dr. Qing Que Chen, Chief Technical Officer, China, Embedded Power, Emerson Network Power

Chiang Chen Studio Theatre, PolyU


10:15-10:45 Keynote Speech 6



Electric Vehicle Development: The Past, Present & Future

Mr. Lixin Situ, Assoc. Director, Automobile Parts and Accessory Systems R&D Centre

Chiang Chen Studio Theatre, PolyU


10:45-11:15 Coffee Break

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


11:15-12:45 Parallel Sessions 3A, 3B, 3C, 3D and 3E

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


Session 3A EMC, Power Quality & Energy Storage
8. Optimization Control of Batteries in Communication and Distribution Systems Based on Dynamic Programming

S.X. Zhou, P. Yang, S.R. Liu, M.G. Zheng

School of Electric Power, South China University of Technology
13. Research on Intelligent Charging Technique of Electric Current Pump

D.S. Ke, G.X. Yao

The Center of New Energy Resources, South China University of Technology
46. A Optimized Method for Electric Power System Harmonics Based on Back-propagation Neural Network and Genetic Algorithm

T. Li, Y.R. Chen, G.M. Li

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
83. Design and Performance of a Shunt Active Power Filter for Three-phase Four-wire System

D.Y. Wu, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University

95. Research and Design of a Common Mode Hybrid EMI Filter for Switch-mode Power Supply

P. Wang, C.B. Tao. B.H. Cheng

School of Electrical Engineering & Automation, Tianjin University
124. System and Control Design of a Hybrid Active Power Filter in Three-phase Four-wire System

C.S. Lam, M.C. Wong

Department of Electrical and Electronics Engineering, University of Macau
Session 3B Alternative Energy III
34. Power Dispatching of Distributed Wind-Solar Power Generation Hybrid System Based on Genetic Algorithm

M. Li, J. Wu, J. Zeng, L.M. Gao

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
42. The Research on Application of variable Universe Fuzzy Control to Maximum Power Point Tracking System

Z.J. Yang, Y.R. Chen, J.M. Hu

School of Electric Power, South China University of Technology
45. The Realization of Control Subsystem in the Energy Management of Wind/Solar Hybrid Power System

G.M. Li, Y.R. Chen, T. Li

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology

49. Energy Management and Control for Photovoltaic Street Lamp Lighting system

T. Chen, J.M. Yang

School of Electric Power, South China University of Technology
57. Global Solar Radiation Estimation Based on Sunshine Duration at Plateaus Zone, China

L.Y. Kang, S.Q. Zhou, Y.N. Zhang

School of Electric Power, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
Session 3C Machine & Motion II

60. Lateral Control of Smart Car Based on Image Sensor

J. Qiu, G.Z. Cao

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
62. Research of a Fan Fault Diagnosis System Based on Wavelet and Neural Network

G.Z. Cao, X.Y. Lei, J.F. Pan, C.G. Luo

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University

Physics & electronic Engineering College, Nanyang Normal University
64. Design and Analysis of a dSPACE-based Position Control System for a Linear Switched Reluctance Motor

G.Z. Cao, L.M. Lin, H. Qiu, J.F. Pan

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
80. Design and Development of Automatic Control System for Steel Wire Stretching Stress Relaxation Testing Machine

B. Lv, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
84. Motion Controller and the Application of PMAC in AC Servo CNC System

X. Chen, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
92. Design of CAN Board Circuits Based on SJA1000 for Vehicle Motor Drives Systems

S.X. Wang, K.W.E. Cheng, K. Ding

Department of Electrical Engineering, the Hong Kong Polytechnic University
112. A Rotary-linear Switched Reluctance Motor

J.F. Pan, N.C. Cheung, G.Z. Cao

Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University

Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 3D Matrix Converter & Drive
9. Hardware Design and Realization of Matrix Converter Based on DSP & CPLD

C.L. Hu, P. Yang, Y. Xiao, S.X. Zhou

School of Electric Power, South China University of Technology
18. Research on Matrix Converter and Brushless Doubly-fed Machine for Wind Power Generation System

X.L. Zhang, J. Wu, X.F. Feng, X.F. Feng, X.Y. Zhang, X.H. Wang

School of Electric Power, South China University of Technology

Guangdong key laboratory of clean energy technology

Guangdong University of Technology
50. Reactive power Analysis of Brushless Double-fed Machine Fed by Matrix Converter

W.J. Zhou, J. Wu, X.H. Wang, X.H. Qiu

School of Electric Power, South China University of Technology

Automation College, South China University of Technology

Guangdong Key Laboratory of Clean Energy Technology
98. Experimental Study Brushless Doubly-fed Wind Generator’s Excitation by Matrix Converter Based on Line-to-line Voltages Scheme

J.H. Yang, X.F. Feng , X.H. Wang, J. Wu, , X.L. Zhang

Guangdong University of Technology
126. A Robotic Arm Design for Stroke Patients

S.X. Wang, K.W.E. Cheng, K. Ding, J.K. Lin, C.D. Xu

Department of Electrical Engineering, the Hong Kong Polytechnic University
128. Integral Sliding Mode Control with Integral Switching Gain for Magnetic Levitation Apparatus

Z.G. Sun, N.C. Cheung, S.W. Zhao, W.C. Gan

Department of Electrical Engineering, the Hong Kong Polytechnic University

R&D Motion, ASM Assembly Automation Ltd., Hong Kong



Session 3E Vehicular Technology & Green Technology II

78. Application of Force Control in the Vehicle Gasohol Delivery System

D. Li, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
82. An Accurate Vehicle Gasohol Delivery System

H.W. Wang, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
85. Design and Realization of the Vehicle Mounted Unit of the Remote Electronic Monitoring and Calibration System

Y. Yan, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
96. Compensation and Lamp Life Model of HID Lamp

P. Dong, K.W. E. Cheng

Department of Electrical Engineering, the Hong Kong Polytechnic University
106. Simulation of Integrated Controllers of Anti-lock Braking System Based on Simulink/Stateflow

C.D. Xu, K.W.E. Cheng, S. Lin, K. Ding

Department of Electrical Engineering, the Hong Kong Polytechnic University
118. Automobile Hybrid Air Conditioning Technology

Y.P.B. Yeung, K.W.E. Cheng, W.W. Chan, C.Y. Lam, W.F. Choi, T.W. Ng

Department of Electrical Engineering, the Hong Kong Polytechnic University
12:45-14:00 Lunch

Lunch speak by Hong Kong Productivity Council

4th Floor, Communal Building, PolyU


14:00-15:30 Industry Session 1 & Session 4A

3rd Floor, Core Y, Lee Shau Kee Building, PolyU



Industry Session 1

14:00 PowerELab

14:30 Curamik Electronics GmbH

15:00 TÜV SÜD Hong Kong


Session 4A Alternative Energy IV and others
79. Analysis of Nordex N43/600 Wind Turbine

D. Li, Y.B. Che, K.W.E. Cheng

School of Electrical Engineering & Automation, Tianjin University

Department of Electrical Engineering, the Hong Kong Polytechnic University
99. Auto-Disturbance-Rejection Controller for SVC to Enhance Wind Farm Voltage Stability

H.Z. Huang, J.M. Yang, C.Y. Chung

School of Electric Power, South China University of Technology
104. Fuzzy-PID Controller in Yaw System of Wind Turbine Generator

F.Q. Chen, J.M. Yang, K. Li

Guangdong Kay Laboratory of Clean Energy Technology

School of Electric Power, South China University of Technology
110. Power Electronic Technology in Wind Generation System of Variable Speed-constant Frequency

X.H. Wang, J.M. Yang, J. Wu

College of Automation Science and Technology, South China University of Technology


  1. LED lighting development for intelligent clothing

K.W.E. Cheng, K. W. Kwok, Y. L. Kwok, K.W. Chan, N.C.Cheung, Y.K.Ho and Kwok K.F.

Department of Electrical Engineering, Department of Applied Physics,

Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong
15:30-16:00 Coffee Break

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


16:00-17:30 Industry Session 2

3rd Floor, Core Y, Lee Shau Kee Building, PolyU


16:00 Rohde & Schwarz HK Ltd.

16:30 Electric Transport System Ltd.



17:00 Rytech Electronics Ltd.
17:30 Conference Close
Yüklə 121,8 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin