PESA09 Programme and Venue
Day 1 20 May 2009 (Wednesday)
13:00-14:00 Conference Registration
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
14:00-16:30 R&D Centre Tour
Power Electronic Research Centre, PolyU
Hong Kong Productivity Council
Automobile Parts and Accessory Systems R&D Centre
Gathering at Podium Floor, Core Y, Lee Shau Kee Building, PolyU
17:00-18:00 Welcome Drink and Conference Registration
Podium Floor, Core Y, Lee Shau Kee Building, PolyU
Day 2 21 May 2009 (Thursday)
08:45-09:00 Conference Registration
Chiang Chen Studio Theatre, PolyU
09:00-09:15 Opening Ceremony
Dr. Kitty Poon, Under Secretary for Environmental Bureau
Chiang Chen Studio Theatre, PolyU
09:15-09:35 Keynote Speech 1
Sustainable and Economic Energy Mix Possibilities for Power Generation in 2030 and Beyond
Mr. Frederic Maury, MD, TÜV SÜD Hong Kong
Chiang Chen Studio Theatre, PolyU
09:35-09:55 Keynote Speech 2
The EV Market in China
Mr. Xi Xian Niu, Zhong Xing Auto
Chiang Chen Studio Theatre, PolyU
09:55-10:15 Keynote Speech 3
Control Technologies in Distributed Generation System Based on Renewable Energy
Prof. Wu Jie, South China University of Technology
Chiang Chen Studio Theatre, PolyU
10:15-10:45 Live Discussion Forum
Thing We Don’t Know about EVs to Market
Interviewed by Mr. Adrian Brown, Media Journalist from Australia, SBS Channel
Chiang Chen Studio Theatre, PolyU
10:45-11:15 Coffee Break
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
11:00-12:45 Parallel Sessions 1A, 1B, 1C, 1D and 1E
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
Session 1A Electric Vehicle I
39. Experimental Driving System for Electrical Vehicle with Switched Reluctance Motor
J.K. Lin, K.W.E. Cheng, Z. Zhang, X.D. Xue
Department of Electrical Engineering, the Hong Kong Polytechnic University
47. A Novel Outer-Rotor Permanent-Magnet Flux-Switching Machine for Urban Electric Vehicle Propulsion
Patrick C.K. Luk, W.Z. Fei, J.X. Shen, Y. Wang
Engineering Systems Department, DCMT, Cranfield University
48. Study and Simulation of one Bi-directional DC/DC converter in series Hybrid Electric Vehicle
J.M. Hu, Y.R. Yuan, Z.J. Yang
School of Electric Power, South China University of Technology
109. Battery Management System and Control Strategy for Hybrid and Electric Vehicle
B.P. Divakar, K.W.E. Cheng, H.J. Wu, J. Xu, H.B. Ma, W. Ting, K. Ding, W.F. Choi, B.F. Huang, C.H. Leung
Department of Electrical Engineering, the Hong Kong Polytechnic University
Shanghai Jiao Tong University
Automobile Parts and Accessory Systems R&D Centre
123. Towards a Brain-Computer Interface Based Control for Next Generation Electric Wheelchairs
S.Y. Cho, A.P. Vinod, K.W.E. Cheng
Forensics and Security Lab, School of Computer Engineering, Nanyang Technological University
129. Design and Simulation of a Testing Fixture for Planar Magnetic Levitation System Control Using Switched Reluctance Actuator
N.C. Cheung, Z.G. Sun, S.W. Zhao, W.C. Gan
Department of Electrical Engineering, the Hong Kong Polytechnic University
R&D Motion, ASM Assembly Automation Ltd., Hong Kong
Session 1B Alternative Energy I
5. Minimization of Current Stress on the Grid Synchronization of Doubly-fed Induction Generators for Wind Power Generation
K.C. Wong, S.L. Ho, K.W.E. Cheng
Department of Electrical Engineering, the Hong Kong Polytechnic University
11. Towards a Brain-Computer Interface Based Control for Next Generation Electric Wheelchairs
S.Y. Cho, A.P. Vinod, K.W.E. Cheng
Forensics and Security Lab, School of Computer Engineering, Nanyang Technological University
Department of Electrical Engineering, the Hong Kong Polytechnic University
17. Semi-physical Experiment Platform for Wind Power Generation
X.H. Qiu, J. Wu
School of Electric Power, South China University of Technology
26. Distributed Wind-photovoltaic Power System Based on Multi-agent
H.X. Guo, J. Wu, L.M. Gao, L.F. Kong
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
31. The Fault-tolerant Technique in the Rotor Current Controller in Induction Wind Generator
J.H. Wu, G.X. Yao
School of Electric Power, South China University of Technology
125. A 200kW Wind Turbine Power Chain
Y.T. Chang, K.W.E. Cheng, J.K. Lin
Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 1C Inverter & PWM Techniques
55. Study on Electric Vehicle In-Wheel PM SPWM Control Technology
L.Y. Kang, Z.F. Lu, T. Yoshida, Z.Q. Yang
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
65. Minimization of Heat in theSstator Windings of a 3 Phase Induction Motor Using SPWM Technique–An Experimental Study
Manjesha, J. Balakrishanan
Department of Electronic Science, Bangalore University
71. Minimization of Switching Frequency Using Dynamic Sector Detection for a Three-Phase Four-Leg VSI Topology to Compensate Nonlinear Load under Unbalanced and Distorted Supply Voltages
N. Prabhakar, M.K. Mishra
Electrical Engineering Department, Indian Institute of Technology Madras
81. Research on Control Strategy for Three-Phase PWM Voltage Source Rectifier
H.W. Wang, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
90. A Novel Single-Phase Voltage Sag Restorer with Diode-clamped Multilevel Bridge
D.Kai, K.W.E. Cheng, X.D. Xue, B.P. Divakar, S.X. Wang, C.D. Xu, D.H. Wang
Department of Electrical Engineering, the Hong Kong Polytechnic University
111. Analysis and Comparison of Three Implementation Methodologies for High-Resolution DPWM
Y.X. Gao, S.F. Zhang, Y.P. Xu, S.B. Guo
School of Mechanical & Electronic Engineering and Automation, Shanghai University
Session 1D Power Converter I
14. Development of Fuzzy controller for ZCS Quasi-Resonant LUO converter
A.Joseph Basanth, S.P. Natarajan, T.S. Sivakumaran
Research Scholar, Department of Instrumentation Engineering, Annamalai University
15. Novel Cuk Circuit and Its Application in Photovoltaic System
M. Zhang, F. Wang
Department of Automation, Guangdong University of Technology
16. FPGA–based DPWM for Digitally Controlled DC-DC High Frequency Switching Mode Power Supply
Y.X. Gao, S.B. Guo, X.F. Lin-Shi, B. Allard
Shanghai University
INSA de Lyon
25. The Topologies of White LED Lamps' Power Drivers
Y. Liu, J.M. Yang
New Energy Center, School of Electrical Power, South China University of Technology
103. Power Factor K-factor in the Analysis of Dc-dc Converters
B.P. Divakar, K.W.E. Cheng, Z.H. Shi, K.F. Kwok
Department of Electrical Engineering, the Hong Kong Polytechnic University
115. Passivity Based Control Based on Storage Energy for DC converters
Z.H. Shi
Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 1E Power System I
35. Cooperative Reinforcement Learning Algorithm to Distributed Power System Based on Multi-Agent
L.M. Gao
School of Electrical Power, South China University of Technology
37. A Significant Scheme of Distributed Generation System Using Wind/Solar/Diesel Applying in Islands
Y.L. Shen
Institute of Power Electronics & Control Technology, Yat-Sen University
Guangzhou Institute of Energy Conversion, Chinese Academy of Science
73. The Distributed Control of Autonomous Microgrid Based on Voltage
W. Liu, M. Liu
Guangdong University of Technology
86. Construction, Operation and Control of a Laboratory-Scale Microgrid
Y.B. Che, Z.G. Yang, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
12:45-14:00 Complimentary Lunch
Lunch speak by Hong Kong Science and Technology Parks
5th Floor, Communal Building, PolyU
14:00-15:30 Parallel Sessions 2A, 2B, 2C, 2D and 2E
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
Session 2A Electric Vehicle II
2. Review on the Configurations of Hybrid Electric Vehicles
Edward W.C. Lo
Department of Electrical Engineering, the Hong Kong Polytechnic University
69. A Hybrid Approach to Optimal Electric Drive Train Design.
S. Gupta, M. Patil
Hero Electric
74. Study of Motoring Operation of Switched Reluctance Motor Drives for Electric Vehicles
X.D. Xue, J.K. Lin, Z. Zhang, T.W. Ng, K.F. Luk, K.W.E. Cheng, N.C. Cheung
Department of Electrical Engineering, the Hong Kong Polytechnic University
94. Development of Electric Vehicle with Advanced Lighting System and All Electric Drive
C.K. Chan, K.W.E. Cheng, S.L. Ho, T.M. Fung
Department of Electrical Engineering, the Hong Kong Polytechnic University
113. The Electromagnetic Field Analysis of PMSM Used for Hybrid Electric Vehicle
X.Y. Wang, W.G. Gu
School of Electrical Engineering & Automation, Tianjin University
122. Promoting the Wider Use of Electrical Vehicles in Hong Kong: A Strategic Proposal
T.C. Lee, S.C. Michael Wong
Transport Design Lab, School of Design, the Hong Kong Polytechnic University
Session 2B Alternative Energy II
3. Steady-State Analysis of a Self-Excited Six-Phase Induction Generator for Alternate Renewable Energy Generation
G.K. Singh, A. Senthil Kumar, R.P. Saini
Department of Electrical Energy, Indian Institute of Technology
4. The Performance Research of Large Scale Wind Farm Connected to External Power Grid
J.M. Yang, H.P. Li
School of Electric Power, South China University of Technology
36. Research on an Improved Control Strategy in Current-controlled Switched Reluctance Generators
Y.J. Bao, K.W.E. Cheng, B.P. Divakar
Department of Electrical Engineering, the Hong Kong Polytechnic University
66. Steady State Analysis and Control of Wind Turbine Driven Double-Output Induction Generator
B. Chitti Babu, K.B. Mohanty, C. Poongothai
Department of Electrical Engineering, National Institute of Technology Rourkela
75. Prediction of Wind Power Generation Based on Time Series Wavelet Transform
L. Dong, L.J. Wang, Y. Gao, X.Z. Liao
Department of Automatic Control, Beijing Institute of Technology
Session 2C Machine & Motion I
44. Dual Closed Loop Controller of Bus Stepper Motor Based on Back-EMF
J.F. Liu, K.W.E. Cheng
Department of Electrical Engineering, the Hong Kong Polytechnic University
53. Design and analysis of a DSP-based Linear Switched Reluctance Motor
J.F. Pan, N.C. Cheung, G.Z. Cao, L.M. Lin
Department of Electrical Engineering, the Hong Kong Polytechnic University
54. Design and analysis of a novel X-Y table
J.F. Pan, N.C. Cheung, G.Z. Cao, H. Qiu
Department of Electrical Engineering, the Hong Kong Polytechnic University
58. Design of Maglev Ball Control System Based on TMS320F2812
G.Z. Cao, H. Qiu, L.M. Lin, J.F. Pan
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
91. Design of the Temperature and Humidity Instrument Based on 1-wire Sensor for Electric Vehicle Motors
S.X. Wang, K.W.E. Cheng, K. Ding
Department of Electrical Engineering, the Hong Kong Polytechnic University
119. Speed Control of DC Motor Using Fuzzy Logic
H.F. Ho, K.W.E. Cheng
Department of Electrical Engineering, the Hong Kong Polytechnic University
121. Computation of the In-Wheel Switched Reluctance Motor inductance using Finite Element Method
T.W. Ng, K.W.E. Cheng, X.D. Xue
Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 2D Power Converter II
28. Low Cost High-Side Gate Drive Power Supply for Switched Reluctance Machines
K.F. Wong, K.W.E. Cheng, S.L. Ho
Department of Electrical Engineering, the Hong Kong Polytechnic University
33. A DC-DC Converter Used as a Light Dimmer for Compact Fluorescent Lamps
Dillian T.P. Wong, Martin H.L. Chow, C.K. Li
Department of Electronic & Information Engineering, the Hong Kong Polytechnic University
43. Simulation and DSP Based Implementation of Conventional Controller for Double Output Elementary LUO Converter
A. Joseph Basanth, S.P. Natarajan, T.S. Sivakumaran
Research scholar, Department of Instrumentation Engineering
102. Modeling and Simulation of DC / DC Converters Base on Double-loop Control
J. Liu, P. Yang, X.C. Lin, S.X. Zhou
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
116. Nonlinear Phenomena of the Buck-boost Converter Analyzed by Storage Energy
C.D. Xu, K.W.E. Cheng, Z.H. Shu, K. Ding
Department of Electrical Engineering, the Hong Kong Polytechnic University
127. LED Lighting Circuit and Thermal Design for Intelligent Clothing
K.W.E. Cheng, K.F. Kwok
Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 2E Vehicular Technology & Green Technology II
32. Research of Heat Source Analysis of Communication Engine-room and Cold Configuration
Y. Xiao, P. Yang
School of Electric Power, South China University of Technology
63. Development of a Novel Instrument Based on DSP for Measuring Vehicle Noise Combined with Engine Rotating Speed
X.Y. Lei, G.Z. Cao, X. Wang
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
70. 15 kW Induction Cooker
Y. Lu, K.W.E. Cheng, K.W. Chan
Department of Electrical Engineering, the Hong Kong Polytechnic University
77. PLC and Configuration Software Based Supervisory and Control System for Oil Tanks Area
X. Chen, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
93. Simulation of the Control Method for the Adaptive Front Lighting System
C.K. Chan, K.W.E. Cheng, S.L. Ho, T.M. Fung
Department of Electrical Engineering, the Hong Kong Polytechnic University
120. Heating Performance Improvement and Field Study of the Induction Cooker
L.C. Meng, K.W.E. Cheng, K.W. Chan
Department of Electrical Engineering, the Hong Kong Polytechnic University
15:30-18:00 Travelling to Hong Kong Science and Technology Parks
Exchange at HKSTP Networking
Event with Cocktail Reception
Electric Vehicle Demonstration & Test Drive
Gathering at ground floor, Core Y, Lee Shau Kee Building, PolyU
18:00-20:00 Conference Dinner
Hong Kong Science and Technology Parks
Day 3 22 May 2009 (Friday)
08:45-09:00 Conference Registration
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
09:15-09:45 Keynote Speech 4
Recent Developments on Electric Vehicle
Prof. Ka-wai Eric Cheng, Department of Electrical Engineering, the Hong Kong Polytechnic University
Chiang Chen Studio Theatre, PolyU
09:45-10:15 Keynote Speech 5
Opportunities and Challenges to Power Electronics Industry in Alternative and Renewable Energy
Dr. Qing Que Chen, Chief Technical Officer, China, Embedded Power, Emerson Network Power
Chiang Chen Studio Theatre, PolyU
10:15-10:45 Keynote Speech 6
Electric Vehicle Development: The Past, Present & Future
Mr. Lixin Situ, Assoc. Director, Automobile Parts and Accessory Systems R&D Centre
Chiang Chen Studio Theatre, PolyU
10:45-11:15 Coffee Break
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
11:15-12:45 Parallel Sessions 3A, 3B, 3C, 3D and 3E
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
Session 3A EMC, Power Quality & Energy Storage
8. Optimization Control of Batteries in Communication and Distribution Systems Based on Dynamic Programming
S.X. Zhou, P. Yang, S.R. Liu, M.G. Zheng
School of Electric Power, South China University of Technology
13. Research on Intelligent Charging Technique of Electric Current Pump
D.S. Ke, G.X. Yao
The Center of New Energy Resources, South China University of Technology
46. A Optimized Method for Electric Power System Harmonics Based on Back-propagation Neural Network and Genetic Algorithm
T. Li, Y.R. Chen, G.M. Li
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
83. Design and Performance of a Shunt Active Power Filter for Three-phase Four-wire System
D.Y. Wu, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
95. Research and Design of a Common Mode Hybrid EMI Filter for Switch-mode Power Supply
P. Wang, C.B. Tao. B.H. Cheng
School of Electrical Engineering & Automation, Tianjin University
124. System and Control Design of a Hybrid Active Power Filter in Three-phase Four-wire System
C.S. Lam, M.C. Wong
Department of Electrical and Electronics Engineering, University of Macau
Session 3B Alternative Energy III
34. Power Dispatching of Distributed Wind-Solar Power Generation Hybrid System Based on Genetic Algorithm
M. Li, J. Wu, J. Zeng, L.M. Gao
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
42. The Research on Application of variable Universe Fuzzy Control to Maximum Power Point Tracking System
Z.J. Yang, Y.R. Chen, J.M. Hu
School of Electric Power, South China University of Technology
45. The Realization of Control Subsystem in the Energy Management of Wind/Solar Hybrid Power System
G.M. Li, Y.R. Chen, T. Li
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
49. Energy Management and Control for Photovoltaic Street Lamp Lighting system
T. Chen, J.M. Yang
School of Electric Power, South China University of Technology
57. Global Solar Radiation Estimation Based on Sunshine Duration at Plateaus Zone, China
L.Y. Kang, S.Q. Zhou, Y.N. Zhang
School of Electric Power, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
Session 3C Machine & Motion II
60. Lateral Control of Smart Car Based on Image Sensor
J. Qiu, G.Z. Cao
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
62. Research of a Fan Fault Diagnosis System Based on Wavelet and Neural Network
G.Z. Cao, X.Y. Lei, J.F. Pan, C.G. Luo
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
Physics & electronic Engineering College, Nanyang Normal University
64. Design and Analysis of a dSPACE-based Position Control System for a Linear Switched Reluctance Motor
G.Z. Cao, L.M. Lin, H. Qiu, J.F. Pan
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
80. Design and Development of Automatic Control System for Steel Wire Stretching Stress Relaxation Testing Machine
B. Lv, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
84. Motion Controller and the Application of PMAC in AC Servo CNC System
X. Chen, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
92. Design of CAN Board Circuits Based on SJA1000 for Vehicle Motor Drives Systems
S.X. Wang, K.W.E. Cheng, K. Ding
Department of Electrical Engineering, the Hong Kong Polytechnic University
112. A Rotary-linear Switched Reluctance Motor
J.F. Pan, N.C. Cheung, G.Z. Cao
Department of Automation Science, College of Mechatronics and Control Engineering, Shenzhen University
Department of Electrical Engineering, the Hong Kong Polytechnic University
Session 3D Matrix Converter & Drive
9. Hardware Design and Realization of Matrix Converter Based on DSP & CPLD
C.L. Hu, P. Yang, Y. Xiao, S.X. Zhou
School of Electric Power, South China University of Technology
18. Research on Matrix Converter and Brushless Doubly-fed Machine for Wind Power Generation System
X.L. Zhang, J. Wu, X.F. Feng, X.F. Feng, X.Y. Zhang, X.H. Wang
School of Electric Power, South China University of Technology
Guangdong key laboratory of clean energy technology
Guangdong University of Technology
50. Reactive power Analysis of Brushless Double-fed Machine Fed by Matrix Converter
W.J. Zhou, J. Wu, X.H. Wang, X.H. Qiu
School of Electric Power, South China University of Technology
Automation College, South China University of Technology
Guangdong Key Laboratory of Clean Energy Technology
98. Experimental Study Brushless Doubly-fed Wind Generator’s Excitation by Matrix Converter Based on Line-to-line Voltages Scheme
J.H. Yang, X.F. Feng , X.H. Wang, J. Wu, , X.L. Zhang
Guangdong University of Technology
126. A Robotic Arm Design for Stroke Patients
S.X. Wang, K.W.E. Cheng, K. Ding, J.K. Lin, C.D. Xu
Department of Electrical Engineering, the Hong Kong Polytechnic University
128. Integral Sliding Mode Control with Integral Switching Gain for Magnetic Levitation Apparatus
Z.G. Sun, N.C. Cheung, S.W. Zhao, W.C. Gan
Department of Electrical Engineering, the Hong Kong Polytechnic University
R&D Motion, ASM Assembly Automation Ltd., Hong Kong
Session 3E Vehicular Technology & Green Technology II
78. Application of Force Control in the Vehicle Gasohol Delivery System
D. Li, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
82. An Accurate Vehicle Gasohol Delivery System
H.W. Wang, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
85. Design and Realization of the Vehicle Mounted Unit of the Remote Electronic Monitoring and Calibration System
Y. Yan, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
96. Compensation and Lamp Life Model of HID Lamp
P. Dong, K.W. E. Cheng
Department of Electrical Engineering, the Hong Kong Polytechnic University
106. Simulation of Integrated Controllers of Anti-lock Braking System Based on Simulink/Stateflow
C.D. Xu, K.W.E. Cheng, S. Lin, K. Ding
Department of Electrical Engineering, the Hong Kong Polytechnic University
118. Automobile Hybrid Air Conditioning Technology
Y.P.B. Yeung, K.W.E. Cheng, W.W. Chan, C.Y. Lam, W.F. Choi, T.W. Ng
Department of Electrical Engineering, the Hong Kong Polytechnic University
12:45-14:00 Lunch
Lunch speak by Hong Kong Productivity Council
4th Floor, Communal Building, PolyU
14:00-15:30 Industry Session 1 & Session 4A
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
Industry Session 1
14:00 PowerELab
14:30 Curamik Electronics GmbH
15:00 TÜV SÜD Hong Kong
Session 4A Alternative Energy IV and others
79. Analysis of Nordex N43/600 Wind Turbine
D. Li, Y.B. Che, K.W.E. Cheng
School of Electrical Engineering & Automation, Tianjin University
Department of Electrical Engineering, the Hong Kong Polytechnic University
99. Auto-Disturbance-Rejection Controller for SVC to Enhance Wind Farm Voltage Stability
H.Z. Huang, J.M. Yang, C.Y. Chung
School of Electric Power, South China University of Technology
104. Fuzzy-PID Controller in Yaw System of Wind Turbine Generator
F.Q. Chen, J.M. Yang, K. Li
Guangdong Kay Laboratory of Clean Energy Technology
School of Electric Power, South China University of Technology
110. Power Electronic Technology in Wind Generation System of Variable Speed-constant Frequency
X.H. Wang, J.M. Yang, J. Wu
College of Automation Science and Technology, South China University of Technology
-
LED lighting development for intelligent clothing
K.W.E. Cheng, K. W. Kwok, Y. L. Kwok, K.W. Chan, N.C.Cheung, Y.K.Ho and Kwok K.F.
Department of Electrical Engineering, Department of Applied Physics,
Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong
15:30-16:00 Coffee Break
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
16:00-17:30 Industry Session 2
3rd Floor, Core Y, Lee Shau Kee Building, PolyU
16:00 Rohde & Schwarz HK Ltd.
16:30 Electric Transport System Ltd.
17:00 Rytech Electronics Ltd.
17:30 Conference Close
Dostları ilə paylaş: |