Relazione sulla ricerca

PUBBLICAZIONI DEL PROF. MICHELE GIORDANO

V. Antonucci, M. Esposito, M.R. Ricciardi, M. Giordano, M. Zarrelli, “Strain monitoring of composite elements by fibre Bragg grating sensors during a quasi-static indentati”, Composites Part B: Engineering 56, 34-41, 2014

A. Saccomanno, D. Pagnano, A. Irace, A. Cusano, M. Giordano, G. Breglio, “On the Design of a Clad-Etched Fiber Bragg Grating Sensor for Magnetic Field Sensing Applicatio”, Sensors and Microsystems, 227-231, 2014

M. Pisco, G. Quero, A. Iadicicco, M. Giordano, F. Galeotti, A. Cusano, “Breath Figures onto Optical Fibers for Miniaturized Sensing Prob”, Sensors and Microsystems, 237-240, 2014

G. Di Fabio, V. Romanucci, M. Zarrelli, M. Giordano, A. Zarrelli, “C-4 Gem-Dimethylated Oleanes of Gymnema sylvestre and Their Pharmacological Activiti”, Molecules 18 (12), 14892-14919, 2013

J. Alongi, R.A. Carletto, F. Bosco, F. Carosio, A. Di Blasio, F. Cuttica, M. Giordano, et al., “Caseins and hydrophobins as novel green flame retardants for cotton fabri”, Polymer Degradation and Stability 1, 2013

L. Guida, A. Oliva, M.A. Basile, M. Giordano, L. Nastri, M. Annunziata, “Human gingival fibroblast functions are stimulated by oxidized nano-structured titanium surfac”, Journal of dentistry 41 (10), 900-907 1, 2013

A. Bahrampour, A. Iadicicco, G. De Luca, M. Giordano, A. Borriello, A. Cutolo, et al., “Porphyrin thin films on fiber optic probes through UV-light induced depositi”, Optics & Laser Technology 49, 279-283 1, 2013

T. Glaskova, A. Aniskevich, M. Zarrelli, A. Martone, M. Giordano, “Flexural Properties of Epoxy and Epoxy-Based CFRP Filled with Carbon N anotub”, Composite Science and Technology: 2020-Scientific and Technical Challenges et al., 2013

M. Pisco, G. Quero, A. Iadicicco, M. Giordano, F. Galeotti, A. Cusano, “Ultrasensitive nanoprobes based on metallo-dielectric crystals integrated onto optical fiber tips using the breath figures techniq”, Fifth European Workshop on Optical Fibre Sensors, 87942P-87942P-6, 2013

G. Berruti, M. Consales, M. Giordano, L. Sansone, P. Petagna, S. Buontempo, et al., “Radiation hard humidity sensors based on polyimide-coated fiber Bragg gratin”, Fifth European Workshop on Optical Fibre Sensors, 879409-879409-6, 2013

A. Bahrampour, A. Iadicicco, G. De Luca, M. Giordano, A. Borriello, A. Cutolo, et al., “Porphyrin coated fiber optic probes for acid vapor detecti”, Fifth European Workshop on Optical Fibre Sensors, 87941N-87941N-4, 2013

M.R. Ricciardi, V. Antonucci, M. Durante, M. Giordano, L. Nele, G. Starace, et al., “A new cost-saving vacuum infusion process for fiber-reinforced composites: Pulsed infusi”, Journal of Composite Materials, 2013

M. Pisco, G. Quero, A. Iadicicco, M. Giordano, F. Galeotti, A. Cusano, “Lab on fiber by using the breath figure techniq”, SPIE Optics+ Optoelectronics, 87740R-87740R-8, 2013

A. Riccio, M. Damiano, M. Zarrelli, M. Giordano, F. Scaramuzzino, “Simulating the Response of Composite Plates to Fi”, Applied Composite Materials, 1-14 1, 2013

Z. Szillási, S. Buontempo, N. Béni, G. Breglio, A. Cusano, A. Laudati, et al., “One Year of FOS Measurements in CMS Experiment at CE”, Physics Procedia 37, 79-84 1, 2012

A. Saccomanno, A. Laudati, Z. Szillasi, N. Beni, A. Cutolo, A. Irace, M. Giordano, et al., “Long-term temperature monitoring in CMS using fiber optic senso”, IEEE 2 2012 Optochemical Nanosensors CRC Press 1, 2012

G. Berruti, M. Consales, M. Giordano, L. Sansone, P. Petagna, S. Buontempo, et al., “Radiation hard humidity sensors for high energy physics applications using polyimide-coated fiber Bragg gratings senso”, Sensors and Actuators B: Chemical 7, 2012

M. Lavorgna, V. Romeo, A. Martone, M. Zarrelli, M. Giordano, G.G. Buonocore, et al., “Silanization and silica enrichment of multiwalled carbon nanotubes: Synergistic effects on the thermal-mechanical properties of epoxy nanocomposit”, European Polymer Journal 6, 2012

M. Pisco, G. Quero, A. Iadicicco, M. Giordano, F. Galeotti, A. Cusano, “Lab on fiber using self assembly technique: a preliminary stu”, OFS2012 22nd International Conference on Optical Fiber Sensor, 842188-842188-4 2, 2012

P.G. Datskos, N.V. Lavrik, S.R. Hunter, S. Rajic, D. Grbovic, “Infrared imaging using arrays of SiO2 micromechanical detecto”, Optics Letters 37 (19), 3966-3968 3, 2012

P. Pilla, C. Trono, F. Baldini, F. Chiavaioli, M. Giordano, A. Cusano, “Giant sensitivity of long period gratings in transition mode near the dispersion turning point: an integrated design approa”, Optics Letters 37 (19), 4152-4154 11, 2012

G. Faiella, V. Antonucci, S.T. Buschhorn, L. Prado, K. Schulte, M. Giordano, et al., “Tailoring the electrical properties of MWCNT/epoxy composites controlling processing conditio”, Composites Part A: Applied Science and Manufacturing 43 (9), 1441-1447 5, 2012

M. Esposito, S. Buontempo, M. Zarrelli, G. Breglio, A. Saccomanno, Z. Szillasi, M. Giordano, et al., “Fiber Bragg Grating sensors to measure the coefficient of thermal expansion of polymers at cryogenic temperatur”, Sensors and Actuators A: Physical 2, 2012

A. Martone, L. Grassia, M. Zarrelli, M. Giordano, A. D’Amore, “Enthalpy relaxation of an epoxy matrix/carbon nanotub”, AIP Conference Proceedings 1459, 347 8, 2012

A. Martone, C. Formicola, F. Piscitelli, M. Lavorgna, M. Zarrelli, V. Antonucci, M. Giordano, et al., “Thermo-mechanical characterization of epoxy nanocomposites with different carbon nanotube distributions obtained by solvent aided and direct mixi”, Express Polym. Lett 6, 520-531 4, 2012

M.R. Ricciardi, V. Antonucci, M. Giordano, M. Zarrelli, “Thermal decomposition and fire behavior of glass fiber–reinforced polyester resin composites containing phosphate-based fire-retardant additiv”, Journal of Fire Sciences 30 (4), 318-330, 2012

M. Annunziata, A. Oliva, A. Buosciolo, M. Giordano, A. Guida, L. Guida, “Bone marrow mesenchymal stem cell response to nano-structured oxidized and turned titanium surfac”, Clinical oral implants research 23 (6), 733-740 9, 2012

T. Glaskova, A. Aniskevich, M. Zarrelli, A. Martone, M. Giordano, “Mechanical Properties of Epoxy and an Epoxy-Based CFRP Filled with Carbon Nanotub”, Institute of Polymer Mechanics University Of Latvia, 88, 2012

M.R. Ricciardi, V. Antonucci, M. Zarrelli, M. Giordano, “Fire behavior and smoke emission of phosphate–based inorganic fire-retarded polyester res”, Fire and Materials 36 (3), 203-215 4, 2012

T. Glaskova, M. Zarrelli, A. Aniskevich, M. Giordano, L. Trinkler, B. Berzina, “Quantitative optical analysis of filler dispersion degree in MWCNT–epoxy nanocomposi”, Composites Science and Technology 72 (4), 477-481 10, 2012

A. Saccomanno, G. Breglio, A. Irace, M. Bajko, Z. Szillasi, S. Buontempo, M. Giordano, et al., “A calibration method based on look-up-table for cryogenic temperature fiber Bragg grating senso”, Asia Pacific Optical Sensors Conference, 83513C-83513C-5, 2012

M. Giordano, A. Cusano, “Reproduction of Sound of Musical Instruments by Using Fiber Optic Senso”, EP Patent 2,409,124, 2012

A. Petriccione, D. Annicchiarico, V. Antonucci, M. Giordano, A. Riccio, et al., “A stiffness volume averaging based approach to model non-crimp fabric reinforced composit”, Composites Science and Technology 72 (2), 360-369 2, 2012

P. Pilla, A. Sandomenico, V. Malachovská, A. Borriello, M. Giordano, et al., “A protein-based biointerfacing route toward label-free immunoassays with long period gratings in transition mo”, Biosensors and Bioelectronics 31 (1), 486-491 8, 2012

G. Lanza, G. Breglio, M. Giordano, A. Gaddi, S. Buontempo, A. Cusano, “Effect of the anisotropic magnetostriction on Terfenol-D based fiber Bragg grating magnetic senso”, Sensors and Actuators A: Physical 172 (2), 420-427 1, 2011

V. Antonucci, M. Esposito, M.R. Ricciardi, M. Raffone, M. Zarrelli, M. Giordano, “Permeability characterization of stitched carbon fiber preforms by fiber optic senso”, Polym Lett 5 (12), 1075-1084 2, 2011

M. Annunziata, A. Oliva, M.A. Basile, M. Giordano, N. Mazzola, A. Rizzo, et al., “The effects of titanium nitride-coating on the topographic and biological features of TPS implant surfac”, Journal of dentistry 39 (11), 720-728 20, 2011

A. Martone, M. Giordano, V. Antonucci, M. Zarrelli, “Enhancing damping features of advanced polymer composites by micromechanical hybridizati”, Composites Part A: Applied Science and Manufacturing 42 (11), 1663-1672 1, 2011

S.C. Schulz, G. Faiella, S.T. Buschhorn, L. Prado, M. Giordano, K. Schulte, et al., “Combined electrical and rheological properties of shear induced multiwall carbon nanotube agglomerates in epoxy suspensio”, European Polymer Journal 47 (11), 2069-2077 12, 2011

M. Consales, A. Buosciolo, A. Cutolo, G. Breglio, A. Irace, S. Buontempo, M. Giordano, et al., “Fiber optic humidity sensors for high-energy physics applications at CE”, Sensors and Actuators B: Chemical 159 (1), 66-74 11, 2011

T. Glaskova, M. Zarrelli, A. Borisova, K. Timchenko, A. Aniskevich, M. Giordano, et al., “Method of quantitative analysis of filler dispersion in composite systems with spherical inclusio”, Composites Science and Technology 71 (13), 1543-1549 9, 2011

A. Martone, G. Faiella, V. Antonucci, M. Giordano, M. Zarrelli, “Investigation of the Effective Reinforcement Modulus of Carbon Nanotubes in an Epoxy Matr”, InTech 1, 2011

P. Petrone, M. Giordano, S. Giustino, F.M. Guarino, “Enduring Fluoride Health Hazard for the Vesuvius Area Population: The Case of AD 79 Herculane”, PloS one 6 (6), e21085 3, 2011

A. Martone, G. Faiella, V. Antonucci, M. Giordano, M. Zarrelli, “The effect of the aspect ratio of carbon nanotubes on their effective reinforcement modulus in an epoxy matr”, Composites Science and Technology 71 (8), 1117-1123 22, 2011

P.F. Manzillo, P. Pilla, A. Buosciolo, S. Campopiano, A. Cutolo, A. Borriello, M. Giordano, et al., “Self assembling and coordination of water nano-layers on polymer coated long period gratings: toward new perspectives for cation detecti”, Soft Materials 9 (2-3), 238-263 3, 2011

G. Quero, A. Crescitelli, D. Paladino, M. Consales, A. Buosciolo, M. Giordano, et al., “Evanescent wave long-period fiber grating within D-shaped optical fibers for high sensitivity refractive index detecti”, Sensors and Actuators B: Chemical 152 (2), 196-205 7, 2011

C. Formicola, A. De Fenzo, M. Zarrelli, M. Giordano, V. Antonucci, “Zinc-based compounds as smoke suppressant agents for an aerospace epoxy matr”, Polymer International 60 (2), 304-311 7, 2011

G. Faiella, V. Antonucci, F. Daghia, S. Fascia, M. Giordano, “Fabrication and thermo-mechanical characterization of a shape memory alloy hybrid composi”, Journal of Intelligent Material Systems and Structures 22 (3), 245-252 3, 2011

P. Pilla, V. Malachovská, A. Borriello, A. Buosciolo, M. Giordano, L. Ambrosio, et al., “Transition mode long period grating biosensor with functional multilayer coatin”, Optics Express 19 (2), 512-526 13, 2011

P. Petrone, M. Giordano, S. Giustino, F.M. Guarino, “Endemic Fluorosis at Vesuvius-Enduring Fluoride Health Hazard for the Vesuvius Area Population: The Case of Ad 79 Herculane”, Fluoride 44 (3), 177, 2011

C. Meola, G.M. Carlomagno, D. Annicchiarico, M. Giordano, M. Zarrelli, “Detection of delamination in carbon-fibre-reinforced polymers with lock-in thermograp”, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of et al. 5, 2010

A. Cusano, G. Breglio, A. Irace, M. Consales, A. Buosciolo, M. Giordano, et al., “Fiber optic sensors for CMS-CE”, (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 76533G-76533G-5 3, 2010

P.F. Manzillo, P. Pilla, S. Campopiano, A. Borriello, M. Giordano, A. Cusano, “Self-assembling and coordination of water nano-layers on polymeric coated long period gratings as promising tool for cation detecti”, (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 76531Y-76531Y-4 1, 2010

P. Pilla, V. Malachovská, A. Borriello, M. Giordano, L. Ambrosio, A. Cutolo, et al., “Functional multilayer coated long period grating tuned in transition region for life science applicatio”, (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 76531O-76531O-4, 2010

G. Quero, A. Crescitelli, D. Paladino, M. Consales, A. Buosciolo, M. Giordano, et al., “Evanescent-wave LPFG in D-fiber by periodically patterned overl”, (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 76531G-76531G-4, 2010

P. Pilla, V. Malachovská, A. Sandomenico, M. Ruvo, M. Giordano, A. Cutolo, et al., “High sensitivity transition-tuned long period grating for label-free immunosensi”, (EWOFS'10) Fourth European Workshop on Optical Fibre Sensors, 76531X-76531X-4 1, 2010

A. Martone, C. Formicola, M. Giordano, M. Zarrelli, “Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composit”, Composites science a

nd technology 70 (7), 1154-1160 36, 2010

A. Riccio, M. Giordano, M. Zarrelli, “A Linear Numerical Approach to Simulate the Delamination Growth Initiation in Stiffened Composite Pane”, Journal of Composite Materials 44 (15), 1841-1866 3, 2010

G. Faiella, M. Zarrelli, V. Antonucci, M. Giordano, “Tuning by process of the electrical percolation behavior of multiwalled carbon nanotubes/ epoxy composit”, AIP Conference Proceedings 1255, 411, 2010

M. Giordano, A. Cusano, “Reproduction of Sound of Musical Instruments by Using Fiber Optic Senso”, US Patent App. 13/255,939, 2010

A. Cusano, G. Breglio, A. Irace, M. Consales, A. Buosciolo, M. Giordano, et al., “Applications of modern FOS techniques in high energy article physic detectors for the LHC at CE”, Proceedings of the 5th European Workshop on Structural Health Monitoring et al. 2, 2010

A. Cusano, M. Consales, P. Pilla, M. Giordano, A. Cutolo, “Nano-Scale Highly Sensitive Coatings for Advanced Fiber Optic Chemical Sensors: Part I: Materials, Sensors Design and Fabricati”, Journal of Optics Research 12 (1), 67 2, 2010

P. Pilla, A. Cusano, A. Cutolo, M. Giordano, G. Mensitieri, P. Rizzo, et al., “Molecular sensing by nanoporous crystalline polyme”, Sensors 9 (12), 9816-9857 31, 2009

M. Pisco, M. Consales, M. Penza, P. Aversa, M. Giordano, A. Cutolo, et al., “Photonic bandgap modification in hollow optical fibers integrated with single walled carbon nanotub”, Microwave and Optical Technology Letters 51 (11), 2729-2732 2, 2009

P. Pilla, P.F. Manzillo, V. Malachovska, A. Buosciolo, S. Campopiano, et al., “Long period grating working in transition mode as promising technological platform for label-free biosensi”, Optics Express 17 (22), 20039-20050 30, 2009

P. Pilla, P.F. Manzillo, V. Malachovska, S. Campopiano, A. Cutolo, et al., “Development of a platform for biochemical sensing based on overlayered Long Period Gratings working in transiti”, Sensors, 2009 IEEE, 361-366, 2009

P. Pilla, P.F. Manzillo, V. Malachovska, S. Campopiano, A. Cutolo, et al., “Long period gratings working in transition mode as a valuable technological platform for biosensi”, 20th International Conference on Optical Fibre Sensors, 75031G-75031G-4, 2009

G. Faiella, P. Musto, G. Di Florio, A. Buosciolo, L. D'Orazio, V. Antonucci, et al., “Monitoring the Dispersion Process of SWNTs in Aqueous Solutions by UV-Vis and Raman Spectroscopi”, Journal of Nanoscience and Nanotechnology 9 (10), 6026-6033 8, 2009

G. Faiella, F. Piscitelli, M. Lavorgna, V. Antonucci, M. Giordano, “Tuning the insulator to conductor transition in a multiwalled carbon nanotubes/epoxy composite at substatistical percolation thresho”, Applied Physics Letters 95 (15), 153106-153106-3 13, 2009

A. De Fenzo, C. Formicola, V. Antonucci, M. Zarrelli, M. Giordano, “Effects of zinc-based flame retardants on the degradation behaviour of an aerospace epoxy matr”, Polymer degradation and stability 94 (9), 1354-1363 23, 2009

A. Cusano, M. Pisco, G. Parente, G. Lanza, A. Laudati, M. Giordano, et al., “Underwater acoustic sensors based on fiber Bragg gratin”, SPIE Europe Security+ Defence, 74820I-74820I-8 2, 2009

S. Campopiano, A. Cutolo, A. Cusano, M. Giordano, G. Parente, G. Lanza, et al., “Underwater acoustic sensors based on fiber Bragg gratin”, Sensors 9 (6), 4446-4454 15, 2009

M. Consales, A. Crescitelli, M. Penza, P. Aversa, P.D. Veneri, M. Giordano, et al., “SWCNT nano-composite optical sensors for VOC and gas trace detecti”, Sensors and Actuators B: Chemical 138 (1), 351-361 28, 2009

A. Cusano, M. Consales, A. Crescitelli, M. Penza, P. Aversa, P.D. Veneri, M. Giordano, et al., “Charge transfer effects on the sensing properties of fiber optic chemical nano-sensors based on single-walled carbon nanotub”, Carbon 47 (3), 782-788 9, 2009

F. Daghia, G. Faiella, V. Antonucci, M. Giordano, “Thermomechanical Modelling and Experimental Testing of a Shape Memory Alloy Hybrid Composite Pla”, Advances in Science and Technology 59, 41-46 2, 2009

E. Viola, F. Daghia, G. Faiella, V. Antonucci, M. Giordano, “Effect of the Loading History on Shape Memory Alloy Transformation Temperatur”, Advances in Science and Technology 59, 57-62 2, 2009

M. Giordano, J.S. Nasser, M. Zarrelli, A. Cusanob, A. Cutolob, “FIBER OPTIC SENSORS IN STRUCTURAL HEALTH MONITORI”, An Introduction to Optoelectronic Sensors, 378, 2009

C. Ambrosino, A. Iadicicco, S. Campopiano, A. Cutolo, M. Giordano, et al., “Fiber Bragg grating sensors: industrial applicatio”, Introduct Optoelectron Sens 7, 34-52 2, 2009

V. Antonucci, M. Esposito, R. Marzella, M. Giordano, “Numerical and Experimental Study of a Concentrated Indentation Force on Polymer Matrix Composit”, an excerpt from the Proceedings of the COMSOL Conference 2, 2009

G. Faiella, S. Fascia, L. Cianciulli, V. Antonucci, A. Laudati, A. Cusano, et al., “Thermo-mechanical behaviour of a Carbon Fibre Reinforced Shape Memory Alloy Hybrid Composi”, European Symposium on Martensitic Transformations, 07006, 2009

G. Camino, A. Frache, “Synergistic effects of zinc borate and aluminium trihydroxide on flammability behaviour of aerospace epoxy syst”, Express Polymer Letters 3 (6), 376-384 14, 2009

A. Cusano, P. Pilla, M. Giordano, A. Cutolo, “Modal transition in nano-coated long period fiber gratings: principle and applications to chemical sensi”, Advanced Photonic Structures for Biological and Chemical Detection, 35-75 4, 2009.