Title: Exciton binding energy and excitonic absorption spectra in a parabolic quantum wire under transverse electric field
Yüklə 2,34 Mb.
|
|
Source title:Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010 Abbreviated source title:Proc. - Int. Conf. Intelligent Syst. Des. Eng. Appl., ISDEA Volume:2 Monograph title:Proceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010 Issue date:2011 Publication year:2011 Pages:723-726 Article number:5743512 Language:English ISBN-13:9780769542126 Document type:Conference article (CA) Conference name:2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010 Conference date:October 13, 2010 - October 14, 2010 Conference location:Changsha, Hunan, China Conference code:84713 Sponsor:Hunan University of Technology; Central South University; Hunan Instrument and Control Society; InfoBeyond Rechnology LLC Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:This paper proposes a two-stage structure solar inverter topology with maximum power point tracking capability. The control of the solar inverter is digitally implemented using Freescale DSP56F8346; the dedicated photovoltaic intelligent power modules is used for constructing the power stages. In the design process, the circuit component and its parameters are calculated. A prototype is built in the lab to verify the proposed system design. Experimental results show that the system meets the design requirements. © 2010 IEEE. Number of references:10 Main heading:Solar power generation Controlled terms:Design - Electric inverters - Intelligent systems - Photovoltaic effects - Pumps - Systems analysis Uncontrolled terms:Circuit components - Design process - Design requirements - DSP - Freescale - Grid-connected photovoltaic inverters - Intelligent power module - IPM - Maximum Power Point Tracking - Power stage - Solar inverter - System design - Two stage Classification code:961 Systems Science - 741.1 Light/Optics - 723.4 Artificial Intelligence - 704.2 Electric Equipment - 702.3 Solar Cells - 618.2 Pumps - 408 Structural Design DOI:10.1109/ISDEA.2010.419 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20111113749870 Title:The numerical simulation of decarburization of 60Si2CrVA in heat treatment by DEFORM-3D and the research of practical application Authors:Dai, Liang Gang (1); Chen, Rong Fa (1); Zhang, Xian Liang (1); Zhu, Rui (1); Liu, Tao (1); Pan, Yi (1) Author affiliation:(1) College of Mechanical Engineering, Yang Zhou University, NO.196, Hua Yang West Road, Yang Zhou, 225009, China Corresponding author:Dai, L. G.(lgdai_yzu@126.com) Source title:Advanced Materials Research Abbreviated source title:Adv. Mater. Res. Volume:189-193 Monograph title:Manufacturing Process Technology Issue date:2011 Publication year:2011 Pages:4207-4211 Language:English ISSN:10226680 ISBN-13:9783037850312 Document type:Conference article (CA) Conference name:2nd International Conference on Manufacturing Science and Engineering, ICMSE 2011 Conference date:April 9, 2011 - April 11, 2011 Conference location:Guilin, China Conference code:84155 Sponsor:Guangxi University; Guilin University of Electronic Technology; University of Wollongong; Korea Maritime University; Hong Kong Industrial Technology Research Centre (ITRC) Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany Abstract:In according to the DEFORM-3D software, we simulated the decarburization depth of the 60Si2CrVA spring steel in heat treatment, optimized the process parameters with the simulation results. The result of the research illustrated that the actual decarburization depth is consistent with the simulation result, which demonstrate DEFORM-3D has a practical guide for the process of heat treatment. © (2011) Trans Tech Publications. Number of references:8 Main heading:Mathematical models Controlled terms:Computer software - Decarburization - Error analysis - Manufacture - Three dimensional Uncontrolled terms:60Si2CrVA spring steel - DEFORM-3D - Numerical simulation - Practical guide - Process parameters - Simulation result Classification code:537.1 Heat Treatment Processes - 723 Computer Software, Data Handling and Applications - 723.5 Computer Applications - 921 Mathematics - 921.6 Numerical Methods DOI:10.4028/www.scientific.net/AMR.189-193.4207 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20115114620784 Title:The asymptotic periodicity in a Schoener's competitive model Authors:Gan, Wenzhen (1); Lin, Zhigui (2) Author affiliation:(1) School of Mathematic and Physics, Jiangsu Teachers University of Technology, Changzhou 213001, China; (2) School of Mathematical Science, Yangzhou University, Yangzhou 225002, China Corresponding author:Lin, Z.(zglin68@hotmail.com) Source title:Applied Mathematical Modelling Abbreviated source title:Appl. Math. Model. Volume:36 Issue:3
Issue date:March 2012 Publication year:2012 Pages:989-996 Language:English ISSN:0307904X CODEN:AMMODL Document type:Journal article (JA) Publisher:Elsevier Inc., 360 Park Avenue South, New York, NY 10010, United States Abstract:This paper deals with a two species model with Schoener's competitive interaction. The existence and the asymptotic behavior of T-periodic solutions for the periodic system of quasilinear parabolic equations under nonlinear boundary conditions are given by using upper and lower solutions and corresponding iteration. The numerical simulations are also presented to illustrate our result. It is shown that periodic solutions may exist if the inter-specific competition rates are weak. © 2011 Elsevier Inc. Number of references:13 Main heading:Computer simulation Controlled terms:Asymptotic analysis - Nonlinear equations - Partial differential equations - Problem solving Uncontrolled terms:Asymptotic behaviors - Asymptotic periodicity - Competitive interactions - Competitive models - Non-linear boundary conditions - Periodic solution - Periodic system - Quasi-linear - Quasilinear parabolic equations - T-periodic solutions - Upper and lower solutions Classification code:723.5 Computer Applications - 921 Mathematics DOI:10.1016/j.apm.2011.07.064 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114014405572 Title:Novel design of adaptive neural network controller for a class of non-affine nonlinear systems Authors:Shen, Qikun (1); Zhang, Tianping (1) Author affiliation:(1) College of Information Engineering, Yangzhou University, Yangzhou 225009, China Corresponding author:Zhang, T.(tpzhang@yzu.edu.cn) Source title:Communications in Nonlinear Science and Numerical Simulation Abbreviated source title:Comm. Nonlinear Sci. Numer. Simul. Volume:17 Issue:3
Issue date:March 2012 Publication year:2012 Pages:1107-1116 Language:English ISSN:10075704 Document type:Journal article (JA) Publisher:Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands Abstract:The tracking control problem is studied for a class of uncertain non-affine systems. Based on the principle of sliding mode control (SMC), using the neural networks (NNs) and the property of the basis function, a novel adaptive design scheme is proposed. A novel Lyapunov function, which depends on both system states and control input variable, is used for the development of the control law and the adaptive law. The approach overcomes the drawback in the literature. In addition, the lumped disturbances are taken in account. By theoretical analysis, it is proved that tracking errors asymptotically converge to zero. Finally, simulation results demonstrate the effectiveness of the proposed approach. © 2011 Elsevier B.V. Number of references:23 Main heading:Adaptive control systems Controlled terms:Lyapunov functions - Neural networks - Nonlinear systems Uncontrolled terms:Adaptive Control - Adaptive designs - Adaptive laws - Adaptive neural network controller - Basis functions - Control inputs - Control laws - NNs - Non-affine nonlinear systems - Nonaffine systems - Novel design - System state - Tracking control problem - Tracking errors Classification code:723.4 Artificial Intelligence - 731.1 Control Systems - 921 Mathematics DOI:10.1016/j.cnsns.2011.08.005 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20114714537033 Title:Hydrophobically modified alginate for emulsion of oil in water Authors:Yang, Ji Sheng (1); Jiang, Biao (2); He, Wen (2); Xia, Yong Mei (1) Author affiliation:(1) State Key Laboratory of Food Science and Technology, Jiangnan University, Wuxi 214122, China; (2) School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, China Corresponding author:Yang, J.S.(jsyang@yzu.edu.cn) Source title:Carbohydrate Polymers Abbreviated source title:Carbohydr Polym Volume:87 Issue:2
Issue date:January 15, 2012 Publication year:2012 Pages:1503-1506 Language:English ISSN:01448617 CODEN:CAPOD8 Document type:Journal article (JA) Publisher:Elsevier Ltd, Langford Lane, Kidlington, Oxford, OX5 1GB, United Kingdom Abstract:Dodecanol was covalently coupled to sodium alginate (NaAlg) via ester functions using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC-HCl) as a coupling reagent to provide an amphiphilic dodecanol alginate (DA) for subsequent use in oil-in-water (O/W) emulsion application. The structure of DA was confirmed by FT-IR spectrometry. The stability of the emulsions prepared with different concentrations (0.3-1.2 wt%) of DA or 1.0 wt% NaAlg was evaluated by measuring droplet size, microstructure, viscosity and creaming. The results showed that the emulsions containing 1.0 wt% NaAlg, 0.3 and 0.5 wt% DA were unstable and the emulsions containing 0.8-1.2 wt% DA presented better stability during storage. © 2011 Elsevier Ltd. All rights reserved. Number of references:17 Main heading:Emulsification Controlled terms:Alginate - Convergence of numerical methods - Emulsions - Hydrogels - Sodium Uncontrolled terms:Amphiphilics - Carbodiimide hydrochlorides - Coupling reagents - Dodecanol - Droplet sizes - Emulsifier - Ester functions - Oil-in-water - Oil-in-water (o/w) emulsion - Oil-in-water emulsions - Sodium alginates Classification code:549.1 Alkali Metals - 802.3 Chemical Operations - 804 Chemical Products Generally - 804.1 Organic Compounds - 921.6 Numerical Methods DOI:10.1016/j.carbpol.2011.09.046 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114414478717 Title:A clustering algorithm for multiple data streams based on spectral component similarity Authors:Chen, Ling (1); Zou, Ling-Jun (1); Tu, Li (3) Author affiliation:(1) Department of Computer Science, Yangzhou University, Yangzhou, 225009, China; (2) State Key Lab of Novel Software Tech, Nanjing University, Nanjing 210093, China; (3) Department of Computer Science, Jiangyin Polytechnic Institute, Jiangyin 214405, China Corresponding author:Chen, L.(lchen@yzcn.net) Source title:Information Sciences Abbreviated source title:Inf Sci Volume:183 Issue:1
Issue date:January 15, 2012 Publication year:2012 Pages:35-47 Language:English ISSN:00200255 CODEN:ISIJBC Document type:Journal article (JA) Publisher:Elsevier Inc., 360 Park Avenue South, New York, NY 10010, United States Abstract:We propose a new algorithm to cluster multiple and parallel data streams using spectral component similarity analysis, a new similarity metric. This new algorithm can effectively cluster data streams that show similar behaviour to each other but with unknown time delays. The algorithm performs auto-regressive modelling to measure the lag correlation between the data streams and uses it as the distance metric for clustering. The algorithm uses a sliding window model to continuously report the most recent clustering results and to dynamically adjust the number of clusters. Our experimental results on real and synthetic datasets show that our algorithm has better clustering quality, efficiency, and stability than other existing methods. © 2011 Elsevier Inc. All rights reserved. Number of references:41 Main heading:Clustering algorithms Controlled terms:Cluster analysis - Data communication systems - Regression analysis Uncontrolled terms:Auto-regression model - Auto-regressive - Clustering - Clustering quality - Clustering results - Data stream - Data streams - Distance metrics - Multiple data streams - Number of clusters - Parallel data - Similarity analysis - Similarity metrics - Sliding Window - Spectral components - Synthetic datasets - Unknown time delays Classification code:922.2 Mathematical Statistics - 922 Statistical Methods - 723 Computer Software, Data Handling and Applications - 721 Computer Circuits and Logic Elements - 718 Telephone Systems and Related Technologies; Line Communications - 717 Optical Communication - 716 Telecommunication; Radar, Radio and Television DOI:10.1016/j.ins.2011.09.004 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20115114623490 Title:The controlling synthesis and photocatalytic activity of carbon nanotubes loaded with CDS composites under simulated sunlight Authors:Li, Huanying (1); Bai, Shuli (1); Guan, Yujiang (1); Wang, Zibo (2) Author affiliation:(1) Taizhou University, Taizhou, Zhejiang, 317000, China; (2) College of Environmental Science and Engineering, Yangzhou University, Yangzhou, Jiangsu 225127, China Corresponding author:Li, H.(lihuanying@tzc.edu.cn) Source title:Advanced Materials Research Abbreviated source title:Adv. Mater. Res. Volume:396-398 Monograph title:Advances in Chemical Engineering Issue date:2012 Publication year:2012 Pages:768-771 Language:English ISSN:10226680 ISBN-13:9783037853085 Document type:Conference article (CA) Conference name:2011 International Conference on Chemical, Material and Metallurgical Engineering, ICCMME 2011 Conference date:December 23, 2011 - December 25, 2011 Conference location:Beihai, China Conference code:87755 Sponsor:Guangxi University; Wuhan University of Science and Technology; Queensland University of Technology Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany Abstract:The CdS/CNTs nanocomposites were prepared by a simple heating refluxing method, and the scattering of CdS on CNTs surface was controlled by a dropping way. The samples were characterized by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and ultraviolet-visible diffuse reflectance spectroscope (UV-Vis).The photocatalytic activity of the samples was tested in the degradation of Methylene blue dye wasterwater under simulated sunlight with 500w short arc xenon lamp. The results showed that the photocatalytic activity of CdS/CNTs composites was enhanced by controlling CdS scatter on CNTs surface, and the forbidden band width was appropriate lowered when CNTs was added, and the scatter of CdS on CNTs surface was uniform and the photocata-lytic activity was the highest when the mass ration of CdS with CNTs was 4:1.The CdS composites have good stability and potential industrial application. Number of references:7 Main heading:Complexation Controlled terms:Cadmium - Cadmium compounds - Cadmium sulfide - Carbon nanotubes - Electric lamps - Industrial applications - Metallurgical engineering - Photocatalysis - Photodegradation - Surfaces - Transmission electron microscopy - X ray diffraction - Xenon Uncontrolled terms:CdS - Diffuse reflectance - Forbidden band - Good stability - Methylene blue dye - Photocatalytic activities - Refluxing methods - Short arc xenon lamps - Simulated sunlight Classification code:951 Materials Science - 931.3 Atomic and Molecular Physics - 931 Classical Physics; Quantum Theory; Relativity - 913 Production Planning and Control; Manufacturing - 804 Chemical Products Generally - 802.2 Chemical Reactions - 761 Nanotechnology - 741.3 Optical Devices and Systems - 707.2 Electric Lamps - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals - 531 Metallurgy and Metallography DOI:10.4028/www.scientific.net/AMR.396-398.768 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20114514505716 Title:Synthesis of AgBr/ZnO nanocomposite with visible light-driven photocatalytic activity Authors:Wu, Changle (1); Shen, Li (2); Zhang, Yong Cai (2); Huang, Qingli (1) Author affiliation:(1) Testing Center, Yangzhou University, Yangzhou 225009, China; (2) College of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002, China Corresponding author:Wu, C.(wcl20021@yahoo.com.cn) Source title:Materials Letters Abbreviated source title:Mater Lett Volume:66 Issue:1
Issue date:January 1, 2012 Publication year:2012 Pages:83-85 Language:English ISSN:0167577X CODEN:MLETDJ Document type:Journal article (JA) Publisher:Elsevier, P.O. Box 211, Amsterdam, 1000 AE, Netherlands Abstract:AgBr/ZnO nanocomposite was synthesized via chemical precipitation from pure ZnO nanowires, AgNO Number of references:5 Main heading:Nanocomposites Controlled terms:Azo dyes - Emission spectroscopy - High resolution electron microscopy - High resolution transmission electron microscopy - Inductively coupled plasma - Materials properties - Nanowires - Optical emission spectroscopy - Photocatalysis - Photocatalysts - Precipitation (chemical) - Reflection - Silver alloys - Silver halides - Transmission electron microscopy - X ray diffraction - Zinc oxide Uncontrolled terms:Band-gap edge - Chemical precipitation - Inductively coupled plasma-optical emission spectroscopy - Optical materials and properties - Photo-catalytic - Photocatalytic activities - Pure ZnO - UV-vis diffuse reflectance spectra - Visible light - ZnO nanowires Classification code:803 Chemical Agents and Basic Industrial Chemicals - 804 Chemical Products Generally - 804.2 Inorganic Compounds - 802.3 Chemical Operations - 932.3 Plasma Physics - 933.1.1 Crystal Lattice - 941.4 Optical Variables Measurements - 933 Solid State Physics - 802.2 Chemical Reactions - 423 Non Mechanical Properties and Tests of Building Materials - 547.1 Precious Metals - 711 Electromagnetic Waves - 421 Strength of Building Materials; Mechanical Properties - 741.1 Light/Optics - 761 Nanotechnology - 801 Chemistry - 741.3 Optical Devices and Systems DOI:10.1016/j.matlet.2011.08.030 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114614522712 Title:Proposal of fast implicit level set scheme for medical image segmentation using the chan and vese model Authors:Lu, Huimin (1); Serikawa, Seiichi (1); Li, Yujie (1); Zhang, Lifeng (1); Yang, Shiyuan (1); Hu, Xuelong (2) Author affiliation:(1) Department of Electrical Engineering and Electronics, Kyushu Institute of Technology, Sensui-Cho, Tobata-Ku, Kitakyushu 804-8550, Japan; (2) School of Information Engineering, Yangzhou University, 196 West Huayang Road, Hanjiang, Yangzhou 225127, China Corresponding author:Lu, H.(luhuimin@boss.ecs.kyutech.ac.jp) Source title:Applied Mechanics and Materials Abbreviated source title:Appl. Mech. Mater. Volume:103 Monograph title:Advances in Precision Instrumentation and Measurement Issue date:2012 Publication year:2012 Pages:695-699 Language:English ISSN:16609336 ISBN-13:9783037852606 Document type:Conference article (CA) Conference name:3rd International Conference on Precision Instrumentation and Measurement 2011, CPIM2011 Conference date:July 18, 2011 - July 21, 2011 Conference location:Xiangtan, China Conference code:87299 Sponsor:Hunan University of Science and Technology; Hunan Provincial Instrument and Control Society; Gunma University; Hunan Prov. Key Lab Health Maint. Mech. Equip.; Eng. Res. Cent. Adv. Min. Equip. (Min. Educ.) Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany Abstract:People living in the information age, are more and more attention to their lives. It is also said, social life is more important in present and future. The social life contains three fields. In this paper, we propose a new model for active contours to detect objects in a given medical image, in order to facilitate people to have medical treatment. The proposed method is based on techniques of piecewise constant and piecewise smooths Chan-Vese Model, semi-implicit additive operator splitting (AOS) scheme for image segmentation. Different from traditional models, our model uses the level set which are corresponding to ordinary differential equation (ODE). Our model has more improved characteristics than traditional models, such as: less sensibility of noise; unnecessary of re-initialization and high speed by the simplified ordinary differential function. Finally, we validate the proposed model by numerical synthetic and real images. The experimental results demonstrate that our model is at least two times more efficient than the widely used methods. Number of references:8 Main heading:Image segmentation Controlled terms:Edge detection - Measurements - Medical imaging - Ordinary differential equations Uncontrolled terms:Active contours - Aos scheme - Curvature - De-noising - Level Set - Social life Classification code:944 Moisture, Pressure and Temperature, and Radiation Measuring Instruments - 943 Mechanical and Miscellaneous Measuring Instruments - 942 Electric and Electronic Measuring Instruments - 941 Acoustical and Optical Measuring Instruments - 921.2 Calculus - 746 Imaging Techniques - 741.1 Light/Optics - 741 Light, Optics and Optical Devices - 716 Telecommunication; Radar, Radio and Television Yüklə 2,34 Mb. Dostları ilə paylaş:
|