* copyright (C) 1984-2019 merrill consultants dallas texas usa
Yüklə 28,67 Mb.
|
|
TYPEMVCI 30.109 Support for Mainview CICS v64 CICS/TS 4.2 (COMPAT). TYPETMD2 30.107 Support for ASG/Landmark TMON DB2 PTFs TE03699/03718. ASMRMFV 30.105 Support for RMF III ASIG3 segments '13'x and '14'x. TYPE119 30.099 Support for CO:Z SMF 119 Subtypes 192 and 193. TYPE1415 30.103 Support for z/OS 1.13-added RAS segment (COMPATIBLE). TYPERACF 30.120 Support for RACF database Record 02G1. TYPEDB2 30.113 Support for DB2 V10 restructured QIST statistics. TYPEZPRO 30.116 Support for Voltage SecureData for z/OS z/Protect. ASUM70PR 30.106 zIIP SHARE WEIGHTS calculated for each LPAR. TYPEDCOL 30.098 DCOLLECT BKUP fields added by z/OS 1.11 supported. TYPE70EN 30.104 Variable SMF70CIN in TYPE70EN was 'ZIP', now 'IIP'. TYPE119 30.121 Additional formats to decode TYPE119 SSH fields. TRNDRMFI 30.115 Revisions for TRNDRMFI using VGETWKLD. TYPESASU 30.114 SAS User Records with SASPROC='SQL (63)' protected. TYPEPMX 30.112 Variables TPMAJCT/TPMSCT too large by 100. TYPE80A 30.111 Debugging PUT 'DEBUG 1' is now disabled. TYPEWPMO 30.110 Windows PERFMON data now supports any delimiter.
ANALID 30.042 SMF AUDIT REPORT - MAJOR ENHANCEMENT - IN BUILDPDB. TYPEDB2 30.089 Support for DB2 V10 APAR PM24723 adds data IFCID=225. TYPE105 30.080 Support for GDPS SMF 105 now validated with SMF data. TYPESAMS 30.073 Support for CA Vantage Stor Resc MGR 12.6.00 INCOMAT. TYPE74 30.072 Support for RMF 74 APAR OA36831 (COMPAT) SMF74NSS. TYPECMA 30.070 Support for CA-Spool Subtype 12 (partial). TYPEFERT 30.066 Support for new subtype 1 and 4 FERRET SMF records. TYPE115 30.064 Support for MQ QJST 7.01B Statistics Block. TYPE117 30.063 SMF 117 IMFL subtype SM17ACCT kept in WS 7.0.0.3 SMF. UTILEXCL 30.092 WMQGETTM, others, incorrectly multiplied by 16. TYPE60 30.082 INPUT EXCEEDED for ID=60 with no VVR segment. BLDSMPDB 30.081 Enhancement adds rundays=mon tue ... to list days. TYPE110 30.078 SMSxxxxx variables were 1024 times large. READDB2 30.077 Cleanup of WANTONLY, IFCID=STATS, 106, etc. TYPETPMX 30.075 READTIME kept in all, JOB/JESNR/JBL24 in TPMJBL24 TYPE7072 30.069 New 1.13 CPUPDPTM/R723RTDM/RTDC/RTDT now populated. DAILYDSN 30.068 DAILYDSN now uses EDGRXEXT instead of EDGRDEXT. TYPE71 30.083 ERROR: DOMAIN ERROR, SAS 9.1.3 SP4 Only.
Many 30.012 RUN STATEMENT HAS NO EFFECT message is removed. READDB2 30.031 Requesting IFCIDS=ACCOUNT with IFCIDS from SMF 102 TYPE0 30.040 Variable DOWNTM was a missing value in PDB.IPLS. TYPE102 30.037 Support for BMC APPTUNE V6R3 SMF 102 records INCOMPAT TYPE102 30.038 Support for DB2 IFCIDs 357 and 358. TYPE102 30.055 Support for DB2 APAR PM37956 to SMF 102 IFCID 25 TYPE110 30.008 CICS/TS 4.2 INVALID STILEN STID=116, zero obs STISJS TYPE119 30.009 Support for SMF 119 ST 6 z/OS 1.13 (INCOMPAT). TYPE21 30.014 Support for APAR OA33947 for TS1140 Tape Drive TYPE71 30.058 New vars added to RMF TYPE71 dataset by z/OS 1.13 TYPE73 30.004 Some FICON-related variables were wrong values. TYPE73 30.054 ERROR: Zero divide in SMF 73 records, new FICON data. TYPE85 30.050 Support for SMF 85 records from z/OS 1.13 (INCOMPAT, TYPEBBMQ 30.047 Support for BMC Mainview for MQ Version 5.1 (INCOMPAT TYPEBVIR 30.057 Support for TS7700 Version 2.0a (INCOMPATIBLE) TYPEDB2 30.032 DB2 variable QWHDRQNM can contain an ipv6 address. TYPEEZSM 30.041 Support for EMC EzSM z/OS Storage Manager SMF record TYPEHSM 30.006 Support for HSM SMF z/OS 1.12 changes (COMPATIBLE) TYPEM204 30.002 MODEL 204 records could be output to wrong dataset. TYPENDM 30.039 NDM-CDI record 'XO' caused "UNKNOWN SUBTYPE" message. TYPENTSM 30.044 Updates to D062, D063, D060, VWRP, D059, D057, VWVS. TYPERMFV 30.043 Updates for RMF III RCD records without.... TYPERSDA 30.035 RSD/FOLDERS name fields were increased to $250. TYPESVIE 30.051 Support for SYSVIEW PTF Test APAR TSD0145, for IMS. TYPETMD2 30.060 Support for TMON/DB2 V5, INCOMPATIBLE, for DB2 V10. TYPETMMQ 30.025 Support for TMON for MQ Version 2.2/2.3/2.4 INCOMPAT TYPEXAM 30.003 Spurious XAM INVALID CPU RECORD messages. UTILCPLG 30.026 %UTILCPLG will copy your .LOG and .LST files. VMACSMF 30.023 A third-party product creates invalid DB2 ID=101 VMXGGETM 30.034 VMXGGETM only supported 512 subtypes.
PDB.JOBS incorrectly built with 29.29. JES 3 ONLY. This change motivated the release of MXG 30.01. TYPE119 30.009 Support for SMF 119 ST 6 z/OS 1.13 (INCOMPAT). No execution error, but data in TYP11906 is wrong. TYPE110 30.008 CICS/TS 4.2 INVALID STILEN STID=116, zero obs STISJS Possible loss of subsequent statistics subtypes. TYPE21 30.014 Support for APAR OA33947 for TS1140 Tape Drive TYPE73 30.004 Some FICON-related variables were wrong values. TYPE102 30.001 QW0319FL, Encryption Type, format AES/DES reversed. ANALDB2R 30.007 PMSTA01/PMSTA02 DB2 Statistics, INTERVAL=DATE fixed. TYPEM204 30.002 MODEL 204 records could be output to wrong dataset. TYPEHSM 30.006 Support for HSM SMF z/OS 1.12 changes (COMPATIBLE)
current MXG Technical Notes. All of these enhancements are described in the Change Log, below.
SAS Version 9.3 TS1M0 REQUIRES THE HOT FIX in SAS NOTE SN43828 (for all platforms), and TS1M1 contains that Hot Fix.
As documented in Change 27.356, with SAS V9.3): The standard SAS JCL Procedure can be used for MXG: // EXEC SAS,CONFIG='MXG.SOURCLIB(CONFIMXG)' //MXGNAMES DD DSN=MXG.USERID.SOURCLIB(MXGNAMES),DISP=SHR or you can continue to use the MXGSAS93 JCL Procedure example. ***************************************************************
all supported platforms, but as noted above, you need TS1M1. With TS1M0, then the Hot Fix in SAS Problem Note SN43828 is REQUIRED to correct an error in the %MACRO compiler, which is SAS portable code, so that Hot Fix is required for ALL platforms. The %MACRO compiler error is in processing %LET statements. While only two MXG members failed repeatedly in MXG QA tests on z/OS, there were random %LET errors in ASCII QA tests, so ANY use of %LET statement on ANY platform are vulnerable to this error, as the %MACRO compiler is SAS portable code, used on all platforms. So this is NOT just an MXG error, but impacts ALL SAS programs. With the Hot Fix on TS1M0, the full MXG QA test stream executed, and there were no new warnings on z/OS.
use MXG 29.06+, because SAS V9.3 did expose incompatibilities in MXG code for ODS reporting, that were fixed in MXG Version 29.06. See Changes 29.159 and 29.169. MXG 26.03 thru MXG 30.30 will execute under SAS V9.2, or with SAS V9.1.3 with Service Pack 4, on all supported SAS platform. SAS Hot Fix for SAS Note 37166 is required to use a VIEW with the MXG EXITCICS/CICSFIUE CICS/DB2 Decompression Infile Exit. SAS V9.1.3 is NOT supported by SAS on Windows SEVEN platform, but SAS V9.2 does execute on that platform. And, only for z/OS 1.10 with SAS V9.1.3 with ANY version of MXG, the SAS Hot Fix for SN-35332 is REQUIRED (to be completely safe). Without this Hot Fix, "LIBREF XXXXXXXX IS NOT ASSIGNED" errors can occur even though //XXXXXXXX DD is a valid SAS Data Library. This error ONLY occurs with z/OS 1.10 and SAS V9.1.3; it does NOT occur with SAS V9.2, nor with z/OS 1.9. It can be circumvented by adding a LIBNAME statement that specifies the ENGINE name. See the Technical Note in Newsletters for SN-35332. Note that SAS V9.1.3 is now at "Level B" Support from SAS.
"Level C" support from SAS Institute, and there are known errors in V8.2 that are only fixed in SAS V9. I no longer QA with V8.2; While many MXG programs (accidentally) will still execute under V8.2, I can not guarantee that all of MXG executes error free. PLEASE INSTALL V9.2/V9.3, FOR BOTH OF US, TO AVOID FIXED PROBLEMS. MXG Software has not executed under SAS V6 in many years. The "PDB" libraries (i.e., SAS data libraries) must be created by SAS V8 or later, but any of those data libraries can be read or updated by the SAS Versions that MXG Supports, above. For SAS Version V9.3: SAS 93 TS1M1 is RECOMMENDED; for TS1M0, SAS Hot Fix in SAS Note SN43828 is REQUIRED. See text of Change 29.159. With SAS 93 TS1M1, (or TS1M0 with that Hot Fix) MXG Version 26.03 or later execute under SAS V9.3 on all platforms. SAS Data Libraries created by SAS V8.2, V9.1.3, V9.2 and V9.3 are interchangeable and can be read/written by any of those versions, provided they are on the same platform. BUT: on ASCII, the 32-bit and 64-bit SAS versions are NOT the same "platform" and attempting to read/use the FORMAT catalog created on one of those "platforms" on the other "platform" will error out to remind you of that difference! SAS V9.3 did change ODS processing defaults and syntax that might cause errors with MXG 29.05 or earlier; MXG 29.06, Change 29.160 documents the major revisions made in MXG to fully support V9.3 ODS, and MXG 29.06 is STRONGLY recommended for ODS with SAS V9.3. For SAS Version V9.2 (TS1M0): Big Picture: SAS Version V9.2 is COMPATIBLE with MXG Software. On z/OS, SAS changed the DSNAMES for some of the SAS libraries, so you do need to use the new MXGSAS92 JCL Procedure for MXG, but it still uses the CONFIGV9 configuration file.
However, NEW, and documented in Change 27.356, with SAS V9.2+: The standard SAS JCL Procedure can be used for MXG: // EXEC SAS,CONFIG='MXG.SOURCLIB(CONFIMXG)' //MXGNAMES DD DSN=MXG.USERID.SOURCLIB(MXGNAMES),DISP=SHR instead of using the MXGSAS92 JCL Procedure example. ****************************************************************
V9.2-created "PDBs" can be read/written by SAS V8.2 or V9.1.3, and vice versa.
and with NO ERRORS reported. Pre-MXG 26.03, SAS Hot Fix F9BA07 was required to suppress a new SAS V9.2 WARNING, that on z/OS, set CC=4 (condition/return code). That warning is harmless (to MXG code) and all MXG created SAS datasets were correct, even with that warning. The ONLY exposure was ONLY on z/OS, and ONLY if condition code tests are used in your MXG jobstreams. SAS Version 9.2 requires z/OS 1.7 or later, both officially as documented by SAS Institute, and actually as V9.2 fails with 0C4 under z/OS 1.4.
not support long length character variables, it can't be used. SAS V9.1.3 with current Service Pack 4 is STRONGLY RECOMMENDED. For (back-level!) SAS V9.1 or V9.1.2 on z/OS: SN-013514 is REQUIRED to be able to read datasets that were created by V6SEQ (tape) engine. SN-012437 is REQUIRED to prevent creation of corrupt/unreadable datasets with tape engines V7SEQ, V8SEQ, or V9SEQ. Both fixes ARE included in SAS V9.1.3, but V9.1 or 9.1.2 is NOT SAFE without those two hot fixes, and if you do NOT have those two fixes on 9.1 or 9.1.2, you MUST set V6SEQ in CONFIGV9. With MXG 23.02 or later, V9SEQ is the default sequential engine specified in CONFIGV9, but if you are back at SAS V9.1 or V9.1.2 you MUST install the two hot fixes listed above.
as an absolute minimum level when that SAS Version was last supported by MXG Software. PLEASE INSTALL SAS V9.x ASAP.
V9SEQ was fixed in V9.1.3; it has been default in CONFIGV9. V8SEQ was always safe under SAS V8.2, but it wasted CPU time by always compressing when writing in tape format. V6SEQ, if used under V9.1.2, requires SN-013514, but V6SEQ should no longer be used, as it does not support long length variables.
on Windows XP with 32-bit INTEL, and on Windows Seven Ultimate 32-bit and 64-bit OS on 64-bit hardware, but MXG is installed on many more hardware and software platforms: since they all work, we don't need to list them. If SAS executes so does MXG.
that time on Linux RH8 on Intel, on Solaris v2.8 on a Model V880, and on HP-UX v11.11 model rp5470, confirming full compatibility.
platform without errors! Each new MXG version is also tested with the SAS ITSV/ITRM product by the ITRM developers.
WPS Version 2.3.5 required MXG 27.05. See NEWSLETTERS for "MXG Support for WPS Software" IV. MXG Version Required for Hardware, Operating System Release, etc. Availability dates for the IBM products and MXG version required for error-free processing of that product's data records:
Availability MXG Version Product Name Date Required
MVS/ESA 4.2 Mar 29, 1991 9.9 MVS/ESA 4.2.2 Aug 15, 1991 9.9 MVS/ESA 4.3 Mar 23, 1993 10.10 MVS/ESA 5.1.0 - compatibility Jun 24, 1994 12.02 MVS/ESA 5.1.0 - Goal Mode May 3, 1995 13.01 MVS/ESA 5.2.0 Jun 15, 1995 13.05 MVS/ESA 5.2.2 Oct 19, 1995 13.09 OS/390 1.1.0 Feb 22, 1996 14.01 OS/390 1.2.0 Sep 30, 1996 14.05 OS/390 1.3.0 Compatibility Mode Mar 28, 1997 14.14 OS/390 1.3.0 WLM Goal Mode Mar 28, 1997 15.02 OS/390 2.4.0 Sep 28, 1997 15.06 OS/390 2.5.0 Feb 24, 1998 15.06 OS/390 2.6.0 Sep 24, 1998 16.04 OS/390 2.7.0 Mar 26, 1999 16.09 OS/390 2.7.0 APAR OW41318 Mar 31, 2000 18.03 OS/390 2.8.0 Aug 24, 1999 16.09 OS/390 2.8.0 FICON/SHARK Aug 24, 1999 17.08 OS/390 2.8.0 APAR OW41317 Mar 31, 2000 18.03 OS/390 2.9.0 Mar 31, 2000 18.03 OS/390 2.10.0 Sep 15, 2000 18.06 OS/390 PAV Oct 24, 2000 18.09 z/OS 1.1 Mar 30, 2001 18.11 z/OS 1.1 on 2064s Mar 30, 2001 19.01 z/OS 1.1 with correct MSU Mar 30, 2001 19.02 z/OS 1.2 Oct 31, 2001 19.04 z/OS 1.1,1.2 APARs to 78 Oct 31, 2001 19.05 z/OS 1.2+ APAR OW52227 Apr 26, 2002 20.02 z/OS 1.3+ APAR OW52227 Apr 26, 2002 20.02 z/OS 1.2 JESNR Z2 MODE Apr 26, 2002 20.03 z/OS 1.3 JESNR Z2 MODE Apr 26, 2002 20.03 z/OS 1.4 Tolerate Sep 27, 2002 20.03 z/OS 1.4 Support Sep 27, 2002 20.06 z/OS 1.4 Over 16 CPUs/LPARs May 29, 2003 21.02 z/OS 1.4 DFSMS/rmm, RACF Aug 29, 2003 21.04 z/OS 1.5 Mar 31, 2004 21.21 z/OS IRD ASUM70PR/ASUMCEC Sep 22, 2003 *24.10 z/OS IRD TYPE70PR Mar 11, 2004 *24.10 z/OS IRD TYPE70,RMFINTRV Mar 22, 2002 *24.10 z/OS 1.6 - No IFAs Sep 30, 2004 *22.09 z/OS 1.6 - With IFAs Sep 30, 2004 *22.11 z/OS 1.7 (COMPATIBLE CHANGES) Sep 30, 2005 *24.10 z/OS 1.7 (SPLIT70 CORRECTION) Sep 30, 2005 *24.10 z/OS IFA data in RMF 79s Sep 30, 2005 23.10 z/OS 1.8 - ASMTAPEE assembly Sep 30, 2005 *25.03 z/OS 1.8 - SMF 119 INCOMPAT Sep 30, 2005 *25.06 z/OS More than 32 LPARs Jan 30, 2006 *24.24 z/OS SPLIT RMF 70 records Jan 30, 2006 *24.24 z/OS Dupe SYSTEMs in a SYSPLEX Jan 30, 2006 *24.02 z/OS IRD errors corrected May 15, 2006 24.03 z/OS ASUMCEC errors corrected May 15, 2006 *24.24 z/OS ASUM70LP errors corrected Jun 13, 2006 *24.24 z/OS zIIP Processor Support Jun 22, 2006 *24.24 z/OS Dedicated zIIP Support Mar 8, 2008 *26.01 z/OS Dedicated zAAP Support Mar 8, 2008 26.01 z/OS 1.8 (COMPATIBLE CHANGES) Sep 20, 2006 *24.24 z/OS 1.9 (INCOMPAT, 54 CPs) Sep 27, 2007 25.10 z/OS 1.9 MXGTMNT at ML-39 reASM Sep 27, 2007 25.10 z/OS new z10 variables Mar 5, 2008 26.01 z/OS 1.8 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.9 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.10 (INCOMPAT, MXG code) Sep 15, 2008 26.07 z/OS 1.10 With HiperDispatch Sep 15, 2008 *26.10 z/OS 1.10 RMF III, SMF 119 Jul 20, 2009 27.05 z/OS 1.11 Sep 2, 2009 27.08 z/OS 1.11 New 30 variables Apr 14, 2010 *28.02 z/OS 1.12 Aug 17, 2010 *28.05 z/OS 1.12 SMF 85 Subtype 79 Aug 17, 2010 *29.03 z/OS 1.12 VMGUEST option Aug 17, 2010 *29.06 z/OS 1.13 Sep 30, 2011 29.03 z/OS 1.13 - MXGTMNT only Dec 15, 2011 29.08 z/OS 1.13 SMF 119 ST 6 INCOMPAT Feb 7, 2012 30.01 z990 CPUs - CPUTYPE '2084'x Aug 25, 2003 21.04 z890 CPUs - CPUTYPE '2086'x Jun 24, 2004 22.07 z9 CPUs - CPUTYPE '2094'x Jul 20, 2005 *24.24 z9EC CPUs - CPUTYPE '2094'x: with 64-bit z/OS - no change required *24.24 with 32-bit z/OS only: Aug 26, 2006 24.06 z9BC CPUs - CPUTYPE '2096'x: with 64-bit z/OS - no change required 24.01 with 32-bit z/OS only: Jul 27, 2006 *24.24 z10 CPUs - CPUTYPE '2097'x Dec 7, 2008 25.11 z10 HiperDispatch/Parked Time Mar 3, 2008 *26.10 z196 (INCOMPAT IF GT 64 ENG) Aug 17, 2010 28.05 CICS/ESA 3.2 Jun 28, 1991 9.9 CICS/ESA 3.3 Mar 28, 1992 10.01 CICS/ESA 4.1 Oct 27, 1994 13.09 CICS/ESA 5.1 aka CICS/TS V1R1 Sep 10, 1996 14.07 CICS-Transaction Server V1R1 Sep 10, 1996 14.07 CICS-TS V1R1 with APAR UN98309 Sep 15, 1997 15.06 CICS-TS V1R2 CICS/TS 1.2 Oct 27, 1997 15.06 CICS-TS V1R3 CICS/TS 1.3 Mar 15, 1999 17.04 CICS-TS V2R2 CICS/TS 2.2 Feb 9, 2002 19.19 CICS-TS V2R3 CICS/TS 2.3 Aug 13, 2004 22.04 CICS-TS V3R1 CICS/TS 3.1 Jan 18, 2005 22.22 CICS-TS V3R2 CICS/TS 3.2 Dec 6, 2007 25.11 CICS-TS for Z/OS Version 2.1 Mar 15, 2001 18.11 CICS-TS for Z/OS Version 2.2 Jan 25, 2002 19.19 CICSTRAN subtype 1 support only *19.19 CICSTRAN subtype 2 completed *19.08 CICS-TS for Z/OS Version 2.3 Dec 19, 2003 Using UTILEXCL to create IMACEXCL: 21.04 Reading un-Excluded CICS with TYPE110, no IMACEXCL:*22.04 CICS-TS for Z/OS Version 3.1 Mar 15, 2005 Using UTILEXCL to create IMACEXCL: 22.13 Reading un-Excluded CICS with TYPE110, no IMACEXCL: 22.22 CICS-TS for Z/OS Version 3.2 Jun 29, 2007 25.03 CICS-TS/3.2 Compressed Records Nov 3, 2007 25.11 CICS-TS/4.1 (CICSTRAN INCOMPAT) Mar 13, 2009 27.01 CICS-TS/4.1 (STATISTICS ST=2) Sep 18, 2009 27.08 CICS-TS/4.2 CICSTRAN/STATISTICS Jun 24, 2011 29.03 CICS-TS/4.2 CICSRDS MNSEGCL=5 Jun 24, 2011 29.05* CICS-TS/4.2 INVALID STID=116 Jan 31, 2012 30.01* CICS-TS/5.1 (INCOMPATIBLE) Dec 14, 2012 30.08 CICS-TS/5.1 for valid TASZIP/ELG Jan 21, 2013 30.30 DB2 2.3.0 Oct 28, 1991 10.01 DB2 3.1.0 Dec 17, 1993 13.02A DB2 4.1.0 Tolerate Nov 7, 1995 13.07 DB2 4.1.0 Full support Sep 11, 1996 14.07 DB2 5.1.0 Tolerate Jun 27, 1997 14.14 DB2 5.1.0 Full support Jun 27, 1997 15.02 DB2 6.1.0 initial support Mar 15, 1999 16.09 DB2 6.1.0 all buffer pools Mar 15, 1999 18.01 DB2 6.1.0 parallel DB2 Mar 15, 1999 19.19 DB2 7.1.0 parallel DB2 Mar 31, 2001 19.19 DB2 7.1.0 corrections Mar 31, 2001 20.06 DB2 8.1 Tolerate, no packages Mar 31, 2004 20.20 DB2 8.1 New Data Packages wrong Mar 31, 2004 21.08 DB2 8.1 Support with Packages Mar 31, 2004 23.09* DB2 8.1 with all zIIP Variables Sep 30, 2006 24.08 DB2 8.1 +PK47659 Sep 12, 2008 26.08 DB2 9.1 See Change 25.265. Dec 7, 2007 25.11 DB2 9.1 Full Support +PK/56356 Sep 12, 2008 26.08 DB2 10.1 Tolerate Oct 1, 2010 28.06 DB2 10.1 Full plus Compressed. Nov 1, 2010 28.07* DB2 10.1 Invalid Header pre APAR Jan 12, 2011 28.28* DB2 10.1 IFCID=225 INCOMPAT Sep 23, 2011 29.07* DB2 10.1 QWHCCV for QWHCATYP=8 Oct 3, 2011 30.07* DB2 10.1 DBID/OBID decode Jan 21, 2013 30.30* DFSMS/MVS 1.1 Mar 13, 1993 11.11 DFSMS/MVS 1.2 Jun 24, 1994 12.02 DFSMS/MVS 1.3 Dec 29, 1995 13.09 DFSMS/MVS 1.4 Sep 28, 1997 15.04 DFSMS/MVS 1.4 HSM Sep 23, 1998 16.04 DFSMS/MVS 1.5 ??? ??, 1999 16.04 DFSORT SMF V1R5 Mar 1, 2006 24.02 MQM 1.1.2, 1.1.3, 1.1.4 Apr 25, 1996 14.02 MQ Series 1.2.0 May 26, 1998 16.02 MQ Series 2.1.0 Oct 2, 1999 17.07 MQ Series 5.2 Dec 16, 2000 18.10 MQ Series 5.3 Dec 16, 2002 21.05 MQ Series 6.0 Feb 14, 2006 23.23 Webshpere MQ Series 7.0 ??? ??, 2009 *28.06 Websphere MQ Series 7.1 MAR 12, 2011 29.03 Websphere MQ Series 8.0 Jun 24, 2011 29.05 NETVIEW 3.1 type 37 ??? ??, 1996 14.03 NPM 2.0 Dec 17, 1993 12.03 NPM 2.2 Aug 29, 1994 12.05 NPM 2.3 ??? ??, 1996 15.08 NPM 2.4 Nov 18, 1998 17.01 NPM 2.5 Feb ??, 2000 18.02 NPM 2.6 Nov ??, 2001 19.06 RMDS 2.1, 2.2 Dec 12, 1995 12.12 RMDS 2.3 Jan 31, 2002 19.11 TCP/IP 3.1 Jun 12, 1995 12.12 TCP/IP 3.4 Sep 22, 1998 16.04 WebSphere 5.0 APAR PQ7463 Aug 19, 2003 21.04 WebSphere 6.0 Feb 18, 2006 23.23 WebSphere 7.0 Oct 7, 2010 28.06 WebSphere 8.0 Jul 17, 2011 29.05 DOS/VSE POWER V6.3.0 Dec 19, 1998 16.08 VM/ESA 2.0 Dec 23, 1992 10.04 VM/ESA 2.1 Jun 27, 1993 12.02 VM/ESA 2.2 Nov 22, 1994 12.06 VM/ESA 2.3 Jun 1, 1998 16.08 VM/ESA 2.4 Mar 1, 2001 19.03 z/VM 3.1 Mar 1, 2001 19.03 z/VM 3.1 DATABYTE=0 May 2, 2002 20.02 z/VM 4.2 ?? May 2, 2002 20.02 z/VM 4.4 Jan 22, 2005 22.22 z/VM 5.1 Jan 22, 2005 22.22 z/VM 5.2 Jan 22, 2006 24.01 z/VM 5.3 TOLERATE Jun 7, 2007 25.05 z/VM 5.3 NEW VARIABLES Sep 12, 2008 26.08 z/VM 5.4 (COMPATIBLE) Sep 12, 2008 27.01* z/VM 6.1 (NO CHANGES) Jul 7, 2008 27.01 z/VM 6.2 Dec 2, 2011 29.04 IMS log 4.1 Jul 4, 1994 12.02 IMS log 5.1 Jun 9, 1996 14.05 IMS log 6.1 ??? ?, 199? 20.03 IMS log 7.1 ??? ?, 200? 20.03 IMS log 8.1 May 21, 2003 21.02 IMS log 9.1 Mar 96, 2004 26.01* IMS log 10.0 Mar 06, 2007 26.01* Yüklə 28,67 Mb. Dostları ilə paylaş:
|