Machine Translated by Google Entering command parameters

the Mirror Array~
button
·
On the Options Bar, activate the
Plane
field
by clicking
The elements that make up the eye can be mirrored relative to
the plane of symmetry of the Fork.
Machine Translated by Google

---

·
Click the
Create object
button
or turn off the
System
buttons
coordinates
and
Construction planes
in the
View - Hide
menu
or on the Quick Access Toolbar.
·
Enable display of coordinate systems and planes in any way:
In the graphics area, specify the ZY plane - a phantom mirror
array will be created.
click on the visibility icon in the Tree to make the object visible
,
.
Machine Translated by Google

---

Machine Translated by Google

---

Machine Translated by Google

---

Try to include as many elements as possible that
cursor.
Fillet
·
Click the
Fillet button~
~on the
Body Elements panel.
·
Rotate the model 90° around the Z axis so that the ribs are visible. To do
this, while holding down the

key ,
click on the Z arrow.
·
Indicate the two outer edges of the eyelet. Pay attention to the form
Let's round the edges of the part.
Machine Translated by Google

---

· Click the Create object button
The model will show a phantom of fillets with a given radius. You can
decrease or increase using the Radius field counter button.
required to be rounded with the same radius. In this
case, editing the model is simplified and calculations will be
performed faster.
.
· In the Radius field on the Options Bar, set the value to 23. Note the
Objects field, which contains information about the specified
edges.
Machine Translated by Google

---

Machine Translated by Google

---

To place the sketch of the next element, you will need to create an additional
design plane.