Machine Translated by Google Entering command parameters

the Point on Curve
snap
and draw a circle using the
Basic line style.
~s
·
Mark the circle with a diametrical dimension of 7.
Machine Translated by Google

---

~on the
Restrictions panel.
Vertically align the origin and the center of the circle
when
using the
Align~
command
~at a distance of
5.
·
Extrude the
sketch~ Make sure that the direction of the operation displayed on the
phantom is selected correctly.
Machine Translated by Google

---

·
Construct a circle~
Let's build a ditch.
·
Create a sketch on the edge
~in any
place of the sketch.
.
Machine Translated by Google

---

~on the
Restrictions
panel
·
Move the cursor to the edge of the part (cursor 1), and the phantom
projection of the edge onto the sketch plane will be highlighted.
Select this edge by clicking without moving the cursor, and then click the
center of the circle (cursor 2) using the
Closest point snap.
We will place the center of the circle on the curve - the projection of the outer
edge of the large boss onto the sketch plane. We will bind the center in the
following way.
cylindrical face and edge, for example, as shown in the figure. To do
this, click on the Orientation Control sphere, and then, while
holding down the

key ,
click on the Z arrow.
·
Click
the Point
on Curve~
button
( Merge
points group).
·
Click the
Snaps
button
on the Quick Access Toolbar and make sure
that the Snap