Title: Exciton binding energy and excitonic absorption spectra in a parabolic quantum wire under transverse electric field
Yüklə 2,34 Mb.
|
|
Number of references:8 Main heading:Probability density function Controlled terms:Security of data Uncontrolled terms:Analytical results - Decoding errors - Dither modulation - General expression - Generalized Gaussian - Host signals - Independently and identically distributed - Mutually independents - Noise vectors - Valumetric scaling Classification code:723.2 Data Processing and Image Processing - 921 Mathematics DOI:10.1007/978-3-642-25243-3_24 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114614521473 Title:Automatic assembly control system of bar-type engine oil cooler Authors:Zhan, Yuling (1); Zhu, Xinglong (1); Gao, Longqin (1); Ren, Hao (1) Author affiliation:(1) Department of Mechanical Engineering College, University of Yangzhou, Yangzhou, Jiangsu Province, China Corresponding author:Zhan, Y.(zhanyuling1986@163.com) Source title:2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011 Abbreviated source title:IEEE Int. Conf. Mechatronics Autom., ICMA Monograph title:2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011 Issue date:2011 Publication year:2011 Pages:2297-2302 Article number:5986343 Language:English ISBN-13:9781424481149 Document type:Conference article (CA) Conference name:2011 IEEE International Conference on Mechatronics and Automation, ICMA 2011 Conference date:August 7, 2011 - August 10, 2011 Conference location:Beijing, China Conference code:87274 Sponsor:IEEE Robotics and Automation Society; Beijing University of Technology; Kagawa University Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:The operational principle of bar-type engine oil cooler is introduced in this paper, and the assembly process of bar-type engine oil cooler unit is described. The control system project of the shortest path assembly is presented based on the assembly process. This project adopts PCL-839 control card as the controller to control AC servo motor and step motors. AC servo motor is controlled by position mode, and the step motors are controlled by the following mode, which adopts the proximity sensor and the position sensor, respectively. Moreover, the software flow diagram of system control is given. Finally, the feasibility of the control system is verified through a simulation experiment. © 2011 IEEE. Number of references:7 Main heading:AC generator motors Controlled terms:Assembly - Control systems - Cooling systems - Lubricating oils - Sensors - Stepping motors Uncontrolled terms:AC servo motor - Assembly process - Automatic assembly - Control cards - Engine oil - Flow diagram - Motor Control - Operational principles - Position sensors - Shortest path - Simulation experiments - System control Classification code:607.1 Lubricants - 641.2 Heat Transfer - 705 Electric Generators and Motors - 731.1 Control Systems - 801 Chemistry - 913.1 Production Engineering DOI:10.1109/ICMA.2011.5986343 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114614522481 Title:Detection for multiplicative watermarking in DCT domain by Cauchy model Authors:Yin, Xiang (1); Peng, Shuoling (1); Zhu, Xinshan (1) Author affiliation:(1) Department of Information Engineering, Yangzhou University, Yangzhou 225009, China Corresponding author:Yin, X.(yinxiang@yzu.edu.cn) Source title:Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) Abbreviated source title:Lect. Notes Comput. Sci. Volume:7043 LNCS Monograph title:Information and Communications Security - 13th International Conference, ICICS 2011, Proceedings Issue date:2011 Publication year:2011 Pages:173-183 Language:English ISSN:03029743 E-ISSN:16113349 ISBN-13:9783642252426 Document type:Conference article (CA) Conference name:13th International Conference on Information and Communications Security, ICICS 2011 Conference date:November 23, 2011 - November 26, 2011 Conference location:Beijing, China Conference code:87293 Sponsor:National Natural Science Foundation of China (NNSFC); The Microsoft Corporation; Beijing Tip Technology Corporation; Trusted Computing Group (TCG) Publisher:Springer Verlag, Tiergartenstrasse 17, Heidelberg, D-69121, Germany Abstract:In the last decade, the requirement for copyright protection of digital multimedia has become more and more urgent. As an efficient method to address this issue, watermarking has gained a lot of attention. To watermarking system, detectors have an important influence on its performance. In this paper, we propose a new optimal detector to multiplicative watermarking in the discrete cosine transform (DCT) domain, which is based on Cauchy models. Furthermore, theoretical analysis is also presented. The performance of the new detector is confirmed by various experiments. © 2011 Springer-Verlag. Number of references:15 Main heading:Discrete cosine transforms Controlled terms:Detectors - Optimization - Security of data - Watermarking Uncontrolled terms:Cauchy distribution - Cauchy model - Copyright protections - DCT domain - Digital multimedia - Image Watermarking - Multiplicative watermarking - Optimal detectors - Watermarking systems Classification code:723.2 Data Processing and Image Processing - 811.1.1 Papermaking Processes - 914 Safety Engineering - 921.3 Mathematical Transformations - 921.5 Optimization Techniques DOI:10.1007/978-3-642-25243-3_14 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114614518277 Title:Prediction of sedimentation value in winter wheat using remote sensing variables obtained from HJ-CCD images Authors:Tan, Changwei (1); Tong, Lu (1); Guo, Wenshan (1); Wang, Jihua (2); Huang, Wenjiang (2) Author affiliation:(1) Jiangsu Province Key Laboratory of Crop Genetics and Physiology, Yangzhou University, Yangzhou, China; (2) National Engineering Research Center for Information, Technology in Agriculture, Beijing, China Corresponding author:Tan, C.(tanwei010@126.com) Source title:2011 International Conference on Electrical and Control Engineering, ICECE 2011 - Proceedings Abbreviated source title:Int. Conf. Electr. Control Eng., ICECE - Proc. Monograph title:2011 International Conference on Electrical and Control Engineering, ICECE 2011 - Proceedings Issue date:2011 Publication year:2011 Pages:4018-4021 Article number:6057662 Language:Chinese ISBN-13:9781424481637 Document type:Conference article (CA) Conference name:2nd Annual Conference on Electrical and Control Engineering, ICECE 2011 Conference date:September 16, 2011 - September 18, 2011 Conference location:Yichang, China Conference code:87268 Sponsor:China Three Gorges University; Huazhong University of Science and Technology; Tianjin University; Beihang University; Shanghai University Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:In order to further improve the accuracy and the mechanism of predicting winter wheat quality using remote sensing method, The quantitative relationships between remote sensing variables and agronomy parameters of winter wheat were analyzed. The results of the study showed that: the relationships between sedimentation value (SV) and remote sensing variables were more significant at booting stage than at jointing stage. At booting stage, SV presented a more significant correlation with SIPI than other remote sensing variables. An indirect model based on structure insensitive pigment index(SIPI) and leaf nitrogen content (LNC) and a direct model based on only optimization of soil-adjusted vegetation index(OSAVI) was established to predict SV. The indirect and direct models were evaluated with 20 samples by the determination coefficient(R2) with 0.741 and 0.555, the root mean square error(RMSE) with 3.64ml and 4.28ml, respectively. The indirect model performed better to predict SV with the higher accuracy by 15% than the direct model. It is concluded that the research can provide an effective way to improve the accuracy of predicting wheat quality with aerospace remote sensing, and contribute to large-scale application and promotion of the results. © 2011 IEEE. Number of references:13 Main heading:Remote sensing Controlled terms:Agriculture - Forecasting - Geologic models - Mathematical models - Sediments Uncontrolled terms:Aerospace remote sensing - Determination coefficients - Direct model - HJ-CCD image - Large-scale applications - Leaf nitrogen content - Model-based OPC - prediction model - Root mean square errors - Vegetation index - Wheat quality - Winter wheat Classification code:481.1 Geology - 483 Soil Mechanics and Foundations - 731.1 Control Systems - 821 Agricultural Equipment and Methods; Vegetation and Pest Control - 921 Mathematics DOI:10.1109/ICECENG.2011.6057662 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114514486759 Title:Cation of students innovative and entrepreneurship of China higher engineering colleges Authors:Huo, Zheng-Gang (1); Wu, Zhao-Dan (1) Author affiliation:(1) Business School, Hohai University, Nanjing, China; (2) Hydraulic Science and Engineering College, Yangzhou University, Yangzhou, China, China Corresponding author:Huo, Z.-G.(zghuo@yzu.edu.cn) Source title:2011 IEEE 18th International Conference on Industrial Engineering and Engineering Management, IE and EM 2011 Abbreviated source title:IEEM - Proc.: IEEE Int. Conf. Ind. Eng. Eng. Manage. Issue:PART 3 Monograph title:2011 IEEE 18th International Conference on Industrial Engineering and Engineering Management, IE and EM 2011 Issue date:2011 Publication year:2011 Pages:1919-1921 Article number:6035542 Language:English ISBN-13:9781612844473 Document type:Conference article (CA) Conference name:2011 IEEE 18th International Conference on Industrial Engineering and Engineering Management, IE and EM 2011 Conference date:September 3, 2011 - September 5, 2011 Conference location:Changchun, China Conference code:87136 Sponsor:Chin. Ind. Eng. Inst. Chin. Mech. Eng. Soc. (CMES); Institute of Electrical and Electronic Engineers Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:In order to further ease the unemployment pressure, colleges worked harder on education of student innovation and entrepreneurship. Colleges had tentatively probed in this aspect. However, there were still some problems, such as shortage of teachers. Colleges should further promote the education reform, and actively explore measures on education of student innovation and entrepreneurship. Particularly, Colleges should further update the concept of innovation and entrepreneurship education and build a sound education system. It should strengthen school-enterprise cooperation to ensure that innovation and entrepreneurship education funding. It also should improve organization and management of technology innovation contest to further develop and improve the innovative ability of college students. Under the background of mass higher education, higher engineering institutions must continue to promote the development of innovation and entrepreneurship education. © 2011 IEEE. Number of references:10 Main heading:Students Controlled terms:Engineering education - Industrial engineering - Innovation - Societies and institutions Uncontrolled terms:College students - Education systems - Engineering colleges - Engineering institutions - Entrepreneurship education - Higher education - Higher engineering college - Innovative ability - Organization and management Classification code:901.1.1 Societies and Institutions - 901.2 Education - 912 Industrial Engineering and Management - 912.1 Industrial Engineering DOI:10.1109/ICIEEM.2011.6035542 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20114514485371 Title:A distributors selection medel in flour milling corporation based on grey incidence analysis - Case study of Eastern Flour Milling Corporation, Sanhe City, Hebei Province, China Authors:Sun, Wei (1) Author affiliation:(1) School of Business, Yangzhou University, Yangzhou, China Corresponding author:Sun, W.(pjjerry@126.com) Source title:Proceedings of 2011 IEEE International Conference on Grey Systems and Intelligent Services, GSIS'11 - Joint with the 15th WOSC International Congress on Cybernetics and Systems Abbreviated source title:Proc. IEEE Int. Conf. Grey Syst. Intelligent Serv., GSIS - Jt. WOSC Int. Congr. Cybern. Syst. Monograph title:Proceedings of 2011 IEEE International Conference on Grey Systems and Intelligent Services, GSIS'11 - Joint with the 15th WOSC International Congress on Cybernetics and Systems Issue date:2011 Publication year:2011 Pages:67-70 Article number:6044058 Language:English ISBN-13:9781612844886 Document type:Conference article (CA) Conference name:Joint Conference of the 15th WOSC International Congress on Cybernetics and Systems and 2011 IEEE International Conference on Grey Systems and Intelligent Services, GSIS'11 Conference date:September 15, 2011 - September 18, 2011 Conference location:Nanjing, China Conference code:87124 Sponsor:IEEE Systems, Man, and Cybernetics Society; World Organisation of Systems and Cybernetics; Natural Science Foundation of China (NSFC); Nanjing University of Aeronautics and Astronautics (NUAA); Technical Committee of IEEE SMC on Grey Systems; Grey Systems Society of China, CSOOPEM Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:Distributor selection is an important component of channel design, and in this paper is a novel selection medel is proposed based on grey incidence analysis. First the relevant literature is reviewed and summarized the situation and the limitations of the study. The problems in the process of channel construction of Eastern flour milling corporation and the proposed the propositions of this study are also addressed. Subsequently based on the analysis of the channel in the Eastern flour milling corporation, a grey incidence model and the indicator system of selection and evaluation are constructed. Then utilizing the grey incidence model, selected five candidates distributors are evaluated through the corporate evaluation team to obtain the weight vector scoring and scoring matrix. Finally, the results of the distributor selection model are presented. © 2011 IEEE. Number of references:11 Main heading:Models Controlled terms:Cybernetics - Industry - Information theory - Intelligent systems - Milling (machining) - System theory Uncontrolled terms:Channel design - Distributor selection - Eastern flour milling corporation - Grey incidence - Grey incidence analysis - Hebei Province - Indicator system - Scoring matrix - Selection model - Weight vector Classification code:913 Production Planning and Control; Manufacturing - 912 Industrial Engineering and Management - 911 Cost and Value Engineering; Industrial Economics - 961 Systems Science - 902.1 Engineering Graphics - 716.1 Information Theory and Signal Processing - 604.2 Machining Operations - 723.4 Artificial Intelligence DOI:10.1109/GSIS.2011.6044058 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc.
Accession number:20114514487197 Title:Constrained ant clustering Authors:Xu, Xiao-Hua (1); Pan, Zhou-Jin (1); He, Ping (2); Chen, Ling (1) Author affiliation:(1) Department of Computer Science and Engineering, Yangzhou University, Yangzhou 225009, China; (2) Department of Computer Science and Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China Corresponding author:Xu, X.-H.(arterx@gmail.com) Source title:Proceedings - International Conference on Machine Learning and Cybernetics Abbreviated source title:Proc. - Int. Conf. Mach. Learn. Cybern. Volume:4 Monograph title:Proceedings of 2011 International Conference on Machine Learning and Cybernetics, ICMLC 2011 Issue date:2011 Publication year:2011 Pages:1566-1570 Article number:6016967 Language:English ISSN:2160133X E-ISSN:21601348 ISBN-13:9781457703065 Document type:Conference article (CA) Conference name:2011 International Conference on Machine Learning and Cybernetics, ICMLC 2011 Conference date:July 10, 2011 - July 13, 2011 Conference location:Guilin, Guangxi, China Conference code:87140 Sponsor:Hebei University; IEEE Systems, Man and Cybernetics Society; Chongqing University; South China University of Technology; Hong Kong Baptist University Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States Abstract:By simulating the clustering behavior of the real-world ant colonies, we propose in this paper a constrained ant clustering algorithm based on random walk to deal with the constrained clustering problems with pairwise must-link and cannot-link constraints. Experimental results show that our approach is more effective on both synthetic datasets and UCI datasets compared with the cop-kmeans algorithm and ant-based clustering algorithm. © 2011 IEEE. Number of references:14 Main heading:Clustering algorithms Controlled terms:Cybernetics - Learning systems - Random processes Uncontrolled terms:Ant clustering - Ant clustering algorithm - Ant colonies - Ant-based clustering algorithm - Constrained clustering - Data sets - Random Walk - Synthetic datasets Classification code:721 Computer Circuits and Logic Elements - 731.1 Control Systems - 731.5 Robotics - 922.1 Probability Theory DOI:10.1109/ICMLC.2011.6016967 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20114414470399 Title:Research on integrating hot water system heated by solar with high-rise residential building Authors:Li, Shengcai (1); Zhou, Hongyan (2); Qian, Yong (1) Author affiliation:(1) College of Architectural Science and Civil Engineering, Yangzhou University, Yangzhou, China; (2) Faculty of Architecture and Engineering, Zhejiang Sci-Tech University, Hangzhou, China Corresponding author:Li, S.(li_shcai@126.com) Source title:Applied Mechanics and Materials Abbreviated source title:Appl. Mech. Mater. Volume:71-78 Monograph title:Frontiers of Green Building, Materials and Civil Engineering Issue date:2011 Publication year:2011 Pages:1837-1841 Language:English ISSN:16609336 ISBN-13:9783037852033 Document type:Conference article (CA) Conference name:2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011 Conference date:August 22, 2011 - August 23, 2011 Conference location:Shangri-La, China Conference code:87032 Sponsor:Control Engineering and Information Science Research Association; Int. Front. Sci. Technol. Res. Assoc.; Trans Tech Publications; Chongqing Xueya Conferences Catering Co.,Ltd Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany Abstract:There are problems of resource allocation and integrating technology with building when utilizing solar energy in a high-rise residential building. In this paper, a new 34-storey residential building with solar energy design is taken for example to probe new ways for solar collectors, energy saving and distribution system. A new system is designed to solve the following problems: inadequate roof area for collecting solar energy, energy loss by long-distance heat transporting, and defacing building appearance by setting solar energy facilities on building surface. And to archive the aim of suitably using solar energy, the integration of solar energy facilities with building facade is also discussed. © (2011) Trans Tech Publications. Number of references:3 Main heading:Solar energy Controlled terms:Civil engineering - Energy dissipation - Solar radiation - Tall buildings Uncontrolled terms:Building facades - Building integration - Building surface - Central thermal collecting system - Distribution systems - Energy design - Energy loss - Following problem - High rise residential building - Hot water system - Integrating technology - Residential building - Utilizing solar energy Classification code:402 Buildings and Towers - 409 Civil Engineering, General - 525.4 Energy Losses (industrial and residential) - 657.1 Solar Energy and Phenomena DOI:10.4028/www.scientific.net/AMM.71-78.1837 Database:Compendex Compilation and indexing terms, Copyright 2011 Elsevier Inc. Accession number:20114414470063 Title:Experimental investigation on dynamic characteristics of NOPD thin-wall frame structure Authors:Zhao, Ling (1); She, Guangyu (1) Author affiliation:(1) College of Civil Science and Engineering, Yangzhou University, Yangzhou, 225009, China Corresponding author:Zhao, L.(zhaoling5180@163.com) Source title:Applied Mechanics and Materials Abbreviated source title:Appl. Mech. Mater. Volume:71-78 Monograph title:Frontiers of Green Building, Materials and Civil Engineering Issue date:2011 Publication year:2011 Pages:138-143 Language:English ISSN:16609336 ISBN-13:9783037852033 Document type:Conference article (CA) Conference name:2011 International Conference on Green Building, Materials and Civil Engineering, GBMCE 2011 Conference date:August 22, 2011 - August 23, 2011 Conference location:Shangri-La, China Conference code:87032 Sponsor:Control Engineering and Information Science Research Association; Int. Front. Sci. Technol. Res. Assoc.; Trans Tech Publications; Chongqing Xueya Conferences Catering Co.,Ltd Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany Abstract:The free vibration experiments for the NOPD frame structure were performed to investigate the dynamic characteristics of the frame. The influences of factors such as particle filling ratio, particle filling scheme and vibration direction of the frame on the damping effect are discussed by means of test data. Test results indicate that the particle filling ratio is a principal influencing factor for the damping effect of the frame. Under the same particle filling scheme and filling ratio, the damping increments for out plane vibration of the frame with smaller structural rigidity are normally larger than those for in plane vibration with larger structural rigidity. Within the three schemes of particle filling, the most prominent damping improvement exists in the particle-in-beam scheme under the same filling ratio and the corresponding maximum damping increment reaches 218% for out plane vibration. To obtain the most significant particle damping effect, the most effective scheme of particle filling is to put particles into the cavities of components with large vibration displacement. © (2011) Trans Tech Publications. Yüklə 2,34 Mb. Dostları ilə paylaş:
|