100 general provisions

Yüklə 7,65 Mb.

səhifə	77/108
tarix	18.01.2019
ölçüsü	7,65 Mb.
	#100759

1 ... 73 74 75 76 77 78 79 80 ... 108

Notify District Testing if rejecting material.

707.44	Polyvinyl Chloride Sanitary Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.45	Polyvinyl Chloride Solid Wall Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.46	Polyvinyl Chloride Drain Waste and Vent Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.47	ABS and Polyvinyl Chloride Composite Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.51	ABS Drain Waste and Vent Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.52	ABS Sewer Pipe	If material is shipped with TE24, accept based on inspection of material for type, condition and dimension. Document in CMS. If no TE24, accept based on inspection of material for type, condition, dimension, receipt and verification of manufacturer’s certified test data. Document in CMS	Notify District Testing if rejecting material.
707.70	Welded and Seamless Steel Pipe	Verify type and brand name of material is on QPL at the time of use. Document in CMS.	Notify District Testing and OMM, structural metals and Welding section, if rejecting material because material non-performs or looks defective during use.
708.01	Inorganic Zinc Silicate Primer Paint	Products will be supplied by a source on the Certified List for S-1084 maintained by OMM. Verify type and brand name of material is on QPL at the time of use. Inspect material container for markings, expiration date and condition. Document in CMS.	Notify District Testing and OMM, chemical section, if rejecting material because material non-performs or looks defective during use. Obtain a 1 qt (1 L) sample representative of the defects.
708.02 708.02B 708.02C 708.02D	OZEU Structural Steel Pant Organic Zinc Prime Coat Epoxy Intermediate Coat Urethane Finish Coat	Products will be supplied by a source on the Certified List for S-1084 maintained by OMM. Verify type and brand name of material is on QPL at the time of use. Inspect material container for markings, expiration date and condition. Document in CMS.	Notify District Testing and OMM, chemical section, if rejecting material because material non-performs or looks defective during use. Obtain a 1 qt (1 L) sample representative of the defects.
709.01	Deformed and Plain Billet Steel Bars for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.
709.03	Rail Steel Deformed and Plain Bars for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.
709.05	Axle Steel Deformed and Plain Bars for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.
709.08	Cold-Drawn Steel Wire for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each diameter and submit for QA testing by the Laboratory.
709.09	Fabricated Steel Bar or Rod Mats for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.
709.10	Welded Steel Wire Fabric for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.
709.11	Deformed Steel Wire for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.
709.12	Welded Deformed Steel Wire Fabric for Concrete Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.
709.13	Coated Dowel Bars	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 dowel bars and submit for QA testing by the Laboratory.
709.14	Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 3 ft x 3 ft (1 m x 1 m) of the mat and submit for QA testing by the Laboratory.
709.15	Plastic Supports for Reinforcing Steel	Products will be supplied by a source on the Approved List maintained by OMM. Inspect for dimension and condition.	Notify District Testing if rejecting material that non-performs or looks defective during use.
709.16	Galvanizing Steel Option for Bridge Spirals	Products will be supplied by a source on the Certified List for S-1068 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 30" (.8 m) long samples of each rebar size, with markings, and submit for QA testing by the Laboratory.
710.01.A 710.01 B	Barbed Wire	Products will be supplied by a source on the Certified List for S-1067 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain a 5 ft (1.5 m) length of barbed wire and submit for QA testing by the Laboratory.
710.02	Woven Steel Wire Fence, Type 47	Products will be supplied by a source on the Certified List for S-1067 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain 4 ft (1.2 m) width of fencing and submit for QA testing by the Laboratory.
710.03	Chain-Link Fence [ including Fittings and Accessories]	Products will be supplied by a source on the Certified List for S-1067 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain samples as directed by the Laboratory.
710.06	Deep Beam Rail	Products will be supplied by a source on the Certified List for S-1042 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three (3) 1 ft (0.3 m) lengths of guardrail from the same section and submit for QA testing by the Laboratory.
710.09	Wire Rope Rail	Inspect for dimension, condition, appearance and markings on tag or reel. Submit one (1) six (6) ft. sample to OMM. Document in CMS.	Approval required prior to use. 1Notify District Testing and OMM.
710.11	Fence Posts and Braces [Lumber] [Steel]	Products will be supplied by a source on the Certified List for S-1067 and S-1072 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
710.12	Square-Sawed and Round Guardrail Posts	Products will be supplied by a source on the Certified List for S-1042 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
710.14	Pressure Treated Guardrail and Fence Posts, Braces, and Blocks	Products will be supplied by a source on the Certified List for S-1042 and S-1067 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
710.15	Steel Guardrail Posts	Products will be supplied by a source on the Certified List for S-1042 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
710.16	Guard Posts	Products will be supplied by a source on the Certified List for S-1042 and S-1067 maintained by OMM. Received with TE-24. Check dimension, markings and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
711.01 711.04 711.07	Structural Steel Cold Rolled Steel Steel Castings	Material supplied by a Fabricator source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM. Structural Steel Members are received with TE-24.	If questions concerning structural steel materials, contact OMM Structural Steel Section 1and notify District Testing.
711.02	Galvanized Steel	Any material supplied with galvanizing will conform to this specification. Randomly inspect galvanizing for appearance and thickness of coating.	Notify District Testing if rejecting material.
711.03	Steel for Sheet Piling	Certified Mill Test Data required for new material. Verify tensile and chemical properties meet requirements. Inspect all material for dimension and condition. Used material is not acceptable for permanent installations. Document field inspection.
711.08	Arc-welding Electrode & Fluxes	Verify manufacturer is on Approved List maintained by OMM. Inspect for dimension, condition and markings. Document in CMS.	If material is not on Approved List, certification and test data from supplier will be submitted to OMM. Do not use until approval has been received.
711.09	High Strength Bolts Nuts and Washers	Received with TE-24. Inspect material for dimension, condition and markings. Reject defective material. Perform field testing of assembly combination per S-1080. Document field inspection & testing in CMS.	If field test does not meet requirements of S 1080, retest bolt, nut and washer combination after application of a lubricant. Notify District Testing if rejecting material.
711.10	Machine Bolts	General specification for many common bolts Verify material is component of certified supplier shipment like S-1042 for Guardrail Suppliers or S-1067 for Fence Suppliers. Inspect for condition and coating. Reject defective material.	Notify District Testing if rejecting material.
711.12 711.13 711.14	Gray Iron Castings Ductile Iron Castings Gray Iron & Ductile Iron Castings	Verify manufacturer is on Approved List maintained by OMM. Received with TE-24. Inspect for condition and defect.	1Notify District Testing if rejecting material
711.15 711.16 711.17 711.18 711.19	Sheet Copper Phosphor Bronze Plate Cast Bronze Leaded Bronze Sheet Lead	Material supplied by a Fabricator source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM. Structural Steel Members are received with TE-24. Document in CMS.	If questions concerning structural steel materials, contact OMM Structural Steel Section 1and notify District Testing.
711.20	Aluminum for Railings	Material supplied by a Fabricator source on the Certified List for Items 513, 516, 517 & 518 maintained by OMM. Structural Steel Members are received with TE-24. Document in CMS.	If questions concerning structural steel materials, contact OMM Structural Steel Section 1and notify District Testing.
711.21	Preformed Bearing Pads	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	If material non-performs or looks defective during use 1notify District Testing and OMM.
711.23	Elastomeric Bearings	Only accept elastomeric bearings shipped by TE-24.and provided by certified suppliers conforming to S1081. Notify district testing. to Inspect material to check location and number of internal shims utilizing an ice pick or similar tool. Five (5) Durometer Gage readings should be taken and averaged to determine compliance with design plans. Document in CMS.	Field acceptable for durometer. Reading average range: +/- 7 points of design plan number.
711.24	Waterproofing fabric	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material.
711.25	Type 2 Membrane Waterproofing	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send one (1) 4 ft² sample representative of defect to OMM for QA follow-up.
711.26	Structural Timber, Lumber and Piling	Products will be supplied by a source on the Certified List for S-1072 maintained by OMM. Received with TE-24 and supplier bill of lading. Check dimension, quantity and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
711.27	Prestressing Steel	Material supplied by a Fabricator source on the Certified List for Items 515 maintained by OMM. Prestressed Concrete Members are received with TE-24.	If questions concerning prstressed concrete or prestressed
711.28	Cellular Polyvinyl Chloride Sponge	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send one (1) 1.5'x2.5' sample representative of defect to OMM for QA follow-up.
711.29	Type 3 Membrane Waterproofing	Verify type and brand name of material is on QPL at the time of use. Membrane primer is 705.04 material Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send one (1) 4 square ft sample representative of defect to OMM for QA follow-up.
711.30	Aluminum for Steps	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
711.31	Reinforced Propylene Plastic Manhole Steps	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
712.01	Expansion Shield Anchors	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain three(3) samples representative of defect to OMM for QA follow-up.
712.02	Calcium Chloride	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use contact OMM.
712.03	Sodium Chloride	Inspect material for condition. Submit one (1) pint sample per Each Purchase Order to OMM. Document in CMS.	If additional samples required for material quantities exceeding 3000 tons, Notify District Testing.
712.04 A	Lime [masonry]	Sample & Inspect material for condition with 24 hrs of receipt. One (1) five (5) lb sample for Masonry and Stabilization purposes. One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering. Document in CMS.	Notify District Testing if rejecting material. Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.
712.04 B	Lime [Quick] Stabilization	Assure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS. If questions on material quality Ssample. One (1) five (5) lb sample for Masonry and Stabilization purposes. One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering..	Notify District Testing if rejecting material. Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.
712.04 B	Lime [Hydrated] Stabilization	Assure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS. If questions on material quality sample. One (1) five (5) lb sample for Masonry and Stabilization purposes. One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering	Notify District Testing if rejecting material. Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.
712.04 C	Lime [Hydrated] Stabilization	Assure provided material is from suppliers certified under Supplement 1087 and documentation for m S1087 is complete. Document in CMS. If questions on material quality sample. One (1) five (5) lb sample for Masonry and Stabilization purposes. One (1) ten (10) lb sample of Quicklime. Send to Geotechnical Engineering	Notify District Testing if rejecting material. Samples may be taken in triplicate, if required. Contact Geotechnical Engineering.
712.06	Preservative Treatment for Structural Timber	Component material of pressure treated lumber. No approval required.	If questions on pressure treated lumber check the specific material item and follow those instructions
712.09	Geotextile Fabrics	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use submit one (1) 4' x 4' sample representative of defect to OMM.
712.10	Prefabricated Edge Underdrain	Inspect material for condition and dimension. Manufacturer’s certified test data required for acceptance. Document in CMS.	Notify District Testing if rejecting material.
712.11	Temporary Erosion Control Mats Material [Types A through I]	Inspect material for condition and dimension. Manufacturer’s certified test data required for acceptance. Field Acceptance item Refer to Temporary Materials Policy for documentation requirements.	Notify District Testing if rejecting material.
720.01	Rectangular Reflectors	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, color requirements and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
720.03	Flexible Delineator Posts	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
720.04	Barrier Reflectors	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
721.01	Raised Pavement Marker Castings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify type conforms to pre-qualification requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain one (1) 4x2x0.48 in. sample representative of defect to OMM for QA follow-up.
721.02	Prismatic Retroreflector	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify type conforms to pre-qualification requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use. Obtain one (1) sample representative of defective RPM casting to OMM for QA follow-up.
721.03	Casting Adhesive	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
721.04	Prismatic Retroreflector Adhesive	Verify type and brand name of material is on QPL at the time of use. Inspect for condition and defect. Verify dimension conform to plan requirements. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use
725.02	Electrical Cables	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.
725.03	Unit Type Duct-Cable Systems	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a 10 ft. sample representative of non -compliance or defect to OMM for QA follow-up.
725.04	Rigid Ferrous Metal Electrical Conduit and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition of coating and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.
725.051	Polyvinyl Chloride Conduit and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.
725.052	Polyethylene Conduit and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.
725.06	Polymer Concrete Pull Boxes	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use send a sample representative of non -compliance or defect to OMM for QA follow-up.
725.07	Plastic Pull Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use 1notify District Testing and OMM.
725.08	Portland Concrete Pull Boxes	Products will be supplied by a source on the Certified List for S-1073 maintained by OMM. Received with TE-24. Check dimension, markings, roughness or excessive cracks. Item 604 Installation documented on CA-P-3 Inspection Form. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM..
725.10	Junction Boxes	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.11 B	Lamps for Luminaires	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.11 E	Luminaires for High Intensity Discharge Lamps (including Optical system, lamp, ballast and housing)	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.11 F	Wall Mounted Underpass Luminaires (including Optical system, lamp, ballast and housing)	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.11 G	High Mast/Low Mast Luminaire (including Optical system, lamp, ballast and housing)	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.12	Polyethylene, Fiberglas reinforced, Pull Box with Polymer concrete cover and support ring	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.15	Circuit Cable Connections and terminations	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.16	Ground Rods	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use contact OMM.
725.19 I	Power Service Components Wood Pole	Products will be supplied by a source on the Certified List for S-1072 maintained by OMM. Received with TE-24 and supplier bill of lading. Check dimension, quantity and condition. Document in CMS.	Notify District Testing and OMM, structural welding and metals section, if rejecting material because material non-performs or looks defective during use.
725.20	Multiple Cell Polyvinyl Chloride Conduit and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, markings and conformance to plan requirements. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.21 A	Luminaire Supports Light Poles	Inspect material for condition and conformance to plan requirements. Verify pole provided by Certified Manufacturer under Supplement 1091. Accept with TE-24 Document in CMS	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.21 B	Luminaire Supports Light Towers	Inspect material for condition and conformance to plan requirements. Verify pole provided by Certified Manufacturer under Supplement 1091. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
725.21B9	Luminaire Support Anchor Bolts	OPTION 1 Verify type and brand name of material is on QPL at the time of use. Inspect for condition, and conformance to plan requirements. OPTION 2 Verify pole provided by Certified Manufacturer under Supplement 1091. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.01	Steel Tube and Pipe	This item typically is a component of a sign support. Inspect total component for condition and conformance to shop drawings. Document in CMS	Notify District Testing if rejecting material.
730.015	U-Channel Posts	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District testing and OMM.
730.016	Square Posts	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.02	Steel Anchor Bolts and Nuts	OPTION 1 Verify type and brand name of material is on QPL at the time of use. Inspect for condition, and conformance to plan requirements. OPTION 2 Verify pole provided by Certified Manufacturer under Supplement 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.03	Steel Poles and Arms	Component material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.04	Base and Arm Plates	Component material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.05	Handhole Covers	Component material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.06	Pole Caps	Component material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.07	Arm Caps	Component material provided by Certified Manufacturer under Supplement 1093. Verify manufacturer is on 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.08	Steel Hardware	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.09	Stainless Steel	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.10	Stainless Steel Hardware	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093 Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.11	Aluminum Sheet and Plate	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.12	Aluminum Extrusions	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.13	Aluminum Tube and Pipe	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.14	Aluminum Castings	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.15	Aluminum Forgings	Component material provided by Certified Manufacturer under Supplement 1092 or 1093. Verify manufacturer is on 1092 or 1093. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.16	Aluminum Welding Rods	Normally only applies to shop fabrication. If performing field aluminum welding contact District Testing and OMM for recommendations.	Notify District Testing if rejecting material.
730.17	Aluminum Hardware	Component material provided by Certified Manufacturer under Supplement 1092. Verify manufacturer is on 1092. Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.18	Reflective Sheeting Type F	Use if certification provided. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM..
730.19	Reflective Sheeting Type G	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.191	Reflective Sheeting Type G rebondable	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.192	Reflective Sheeting Type H	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.193	Reflective Sheeting Type J	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.20	Nonreflective Sheeting	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
730.22	Silk Screen Inks	No field acceptance requirements.- part of 730.19,191,192 or 193 items.
730.23	Transparent Electronic Cuttable Films	No field acceptance requirements.- part of 730.19,191,192 or 193 items No field requirements.
731.01	Mercury Vapor Luminaire	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.03	Changeable Message Sign, Electrical Type	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.05	Internally Illuminated Fixed Message Sign	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.06	Sign Flasher Assembly	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.07	School Speed Limit Sign Assembly	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.08	Flexible Conduit	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
731.10	Timer with Enclosure	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.01	Vehicular Signal Heads, Conventional	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.02	Vehicular Signal Heads, Optically Programmed, 12-inch (300 mm) Lens	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.03	Vehicular Signal Heads, Optically Programmed, 8-inch (200 mm) Lens	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.04 A	Optically Programmed And Pedestrian Incandescent Signal Lamps	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.04 B	Vehicular Signal Incandescent Lamps	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.04 C	Vehicular and pedestrian light Emitting Diode Lamps	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.05	Pedestrian Signal Heads [Type A1] [Type A2] [Type D2]	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.06	Pedestrian Pushbuttons	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.07 A	Loop Detector Units Nema TS 1	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.07 B	Loop Detector Units Nema TS 2	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.08	Loop Detector Units, Delay and Extension Type	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.09	Magnetometer Detector Units	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.10	Magnetometer Sensor Probes	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.11	Signal Supports	Check provided by Certified Manufacturer under Supplement 1094 Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.12	Strain Poles	Check provided by Certified Manufacturer under Supplement 1094 Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.13	Wood Poles	Check provided by Certified Manufacturer under Supplement 1072 Accept with TE-24. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.14	Down Guy Assemblies	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.15	Pedestals	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.16	Conduit Risers	See 725.04 requirements.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.17	Cable Support Assemblies	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.18	Messenger Wire	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.19	Cable and Wire	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.20	Power Service	See 725.04 requirements	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
732.21	Disconnect Switch with Enclosure	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.02 A	Controller Unit Type TS2/A1	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.02 B	Controller Unit Type TS2/A2	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.02 C	Controller Unit Type 170E	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.02 D	Controller Unit Type 2070L and LC	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.03 A	Cabinet Type TS 1	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.03 B	Cabinet Type TS 2	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.03 C	Cabinet Type 332	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.03 D	Cabinet Type 334	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.03 E	Cabinet Type 336	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.04 A	Cabinet Riser for TS 1 – TS 2 cabinet	Field inspect for 1/4 aluminum thickness and accept.	Notify District Testing if rejecting material.
733.04 B	Cabinet Riser for Types 332, 334 or 336	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.05	Flasher Controller	Verify type and brand name of material is on QPL at the time of use. Inspect for conformance to dimension and condition. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
733.06	Controller, Master, Traffic Responsive	Assure the same manufacturer as the supplied controller unit 733.02.	Notify District Testing if rejecting material.
733.07	Remote Monitoring Station	Compatible with the supplied 733.02 and 733.06 unit.	Notify District Testing if rejecting material.
740.02	Traffic Paint	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.03	Polyester Pavement Marking	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.04	Thermoplastic Pavement Marking	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.05	Preformed Pavement Marking	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.06	Work Zone Pavement Marking [Type 1 Removable] [Type 2 Non-Removable]	Materials accepted by Engineer. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.07	Epoxy Pavement Marking Material	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District
740.08	Heat-Fused Preformed Plastic Pavement Marking Material	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District
740.09 A	Glass Beads – for 740.02	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.09 B	Glass Beads – for 740.03	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.09 C	Glass Beads – for 740.04	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
740.09 D	Glass Beads – for 740.07	Verify material is on Approved List maintained by OMM. Accepted with TE-24. Inspect container for appropriate markings. Inspect material for uniform consistency. Document in CMS.	If rejecting for performance provide 1 qt (1 L) sample and notify District.
748.01	Ductile Iron Pipe, Joints, and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.02	Polyvinyl Chloride (PVC) Pipe, Joints, and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.03	Polyethylene (PE) Service Branches and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.05	Copper Service Branches and Fittings	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.06	Steel Pipe Encasement	Basis of acceptance is certified test data containing documentation of domestic origin from manufacturer.	Notify District Testing if rejecting material
748.07	Polyethylene Encasement	Verify manufacturer certification conforms to ANSI/AWWA C105/A21.5 Inspect condition, dimension, suitability for intended use.	Notify District Testing if rejecting material.
748.08	Gate Valve and Valve Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.09	Inserting Valve and Valve Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.10	Cutting-in Sleeve, Valve, and Valve Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.11	Tapping Sleeve, Valve, and Valve Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.12	Tapping Saddle and Corporation Stop	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.13	Service Stop and Service Box	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.
748.14	Meter, Setting, Stop, and Chamber	Inspect for condition, dimension, suitability for intended use. Acceptance based on manufacturer’s statement of conformity.
748.15	Fire Hydrant	Verify type and brand name of material is on QPL at the time of use. Inspect for condition, dimension, suitability for intended use. Document in CMS.	Notify District Testing if rejecting material. If material non-performs or looks defective during use notify District Testing and OMM.

Yüklə 7,65 Mb.

Dostları ilə paylaş: