Path: senator-bedfellow

. The program

itself can be obtained from . Sudo's

author, Todd Miller < [e-mail]> reports that sudo works on

both AIX 3.2.X and 4.1.X.

------------------------------
Subject: 4.22: Flexfax/HylaFax and other fax software

From: Christian Zahl

Sam Leffler has released a new version of FlexFax called HylaFax. It

is availible from . There is a HlyaFax web

page at . Version V3.0pl1

supported many types of Class 1/2 fax modems and several UNIX systems

including AIX 3.2.3 or greater. There is also a fax modem review

document at the same site as . The FlexFax

related files on sgi.com are replicated on ftp.bsc.no as well.
>From: [e-mail] (Michael Staats)
We're using mgetty+sendfax for the basic modem I/O, I wrote a printer

backend for the modem so that users can send faxes as easy as they print

postscript. I also wrote a little X interface composer to generate a

fax form that makes sending faxes very easy. You can find these

programs at hal6000.thp.Uni-Duisburg.DE under /pub/source.
program comment
mgetty+sendfax-0.14.tar.gz basic modem I/O, needs hacking for AIX

X11/xform-1.1.tar.gz small and simple X interface composer

with an example fax form. Needs

libxview.a incl. headers.

faxiobe.tar.gz fax backend, needs configuring for

your local site

If you need a binary version of libxview.a and the headers you'll find

them under /pub/binaries/AIX-3-2/lxview.tar.gz.

------------------------------
Subject: *4.23: lsof - LiSt Open Files

From: [e-mail] (Vic Abell)

Q. How can I determine the files that a process has opened?

Q. How can I locate the process that is using a specific network address?

Q. How can I locate the processes that have files open on a file system?
A. Use lsof (LiSt Open Files).

>From: "Juan G. Ruiz Pinto"

Lsof is available via anonymous ftp from vic.cc.purdue.edu

(128.210.15.16) in /pub/tools/unix/lsof/lsof.tar.Z (for the

most current version). The most current version is 4.14. There

are binary distributions in the "binary" directory.

Lsof supports AIX 4.1 since version 3.09.
A prebuilt installp (smit) installable package is available from

. The installation scripts in this package

automatically creates a group "kmem" during the install

and uses "acledit" to allow the kmem group to read /dev/mem and /dev/kmem.

This configuraqtion is reccomended by Vic Abell , the

author of lsof.
------------------------------
Subject: 4.24: popper - POP3 mail daemon
The POP server is available via anonymous ftp from

ftp.qualcomm.com:/quest/unix/servers/popper

The makefile supports AIX

ftp.CC.Berkeley.EDU (128.32.136.9, 128.32.206.12).

There are two versions in the pub directory: a compressed tar file

popper-version.tar.Z and a Macintosh StuffIt archive in BinHex format

called MacPOP.sit.hqx.
Problems building some versions of popper can sometimes be resolved by

compiling with bsdcc or -D_BSD.

The pine 3.95 package on contains "plug

and play" support for both POP3 and IMAP mail reading protocols. You

can also get a compiled version of qpopper 2.2 there also.
------------------------------
Subject: 4.26: mpeg link errors version 2.0

From: Nathan Lane

.XShmCreateImage

.XShmDetach

.XShmAttach

.XShmGetEventBase

.XShmPutImage

.XShmQueryExtension

... are for the Shared Memory extension of the X server.

You can either choose to build it with shared memory or without. I

always do it without the performance increase is not really

incredible, except on something like a 2x0 machine with the local bus

graphics adapter. Just take out "DSH_MEM" in the CFLAGS in the

makefile for mpeg_play. There is more information about shared memory

link errors in section 1.513.
Also, in the module "video.c" for mpeg_play it will complain about not

having enough memory to fully optimize one of the loops. You can get

around that by specificying "qmaxmem=8000" in your cflags line, BUT,

the extra optimization does little good in my tests.

------------------------------
Subject: 4.27: NNTP, INN
Link errors compiling nntp may occur because your machine lacks the

"patch" command. Patch can be obtained from GNU repositories. See question

4.29 for more information on patch.
------------------------------
Subject: 4.28: Zmodem - File transfer
RZSZ is Chuck Forsberg's script for Z-modem. It is available by ftp at

or

directly from Forsberg at Omen Technology BBS at 503-621-3746.

Hints:

0. Build with "make posix"

1. Use an 8-bit clean version of rlogin or telnet (Note: below)

2. Set the system to be transparent, I use "terminal download"

3. Ensure hardware flow-control
Note, [e-mail] (James Carlson) suggests: Rlogin is

"slightly" unclean -- if an FF FF 73 73 appears in the datastream, it

can be ripped out by rlogind as a 'window size change' request.
[Ed note: The important part is using an 8-bit clean application,

since there are several implemenations of rlogin and telnet availible

you may need to try both and hunt down manuals to find the right flags

for your system]

------------------------------
Subject: 4.29: Patch - automated file updates
AIX 3.2.5 does not ship with patch, a utility to apply the differences

between two files to make them identical. This tool is often used to

update source code.



------------------------------
Subject: 4.30: XNTP - network time protocol, synchronizes clocks

From: Joerg Schumacher

AIX 4: xntpd in bos.net.tcp.client

source: ftp://ftp.udel.edu/pub/ntp/

WWW: http://www.eecis.udel.edu/~ntp/

------------------------------

Subject: 4.31: GNU Screen and AIX 4.1.x
Once again, binaries can be had from