Title: Exciton binding energy and excitonic absorption spectra in a parabolic quantum wire under transverse electric field



Yüklə 2,34 Mb.
səhifə51/69
tarix05.01.2018
ölçüsü2,34 Mb.
#37127
1   ...   47   48   49   50   51   52   53   54   ...   69

Corresponding author:Liu, C.(liuchao@yzu.edu.cn)

Source title:American Society of Mechanical Engineers, Power Division (Publication) POWER

Abbreviated source title:ASME Power Div Publ POWER

Monograph title:ASME 2010 Power Conference, POWER 2010

Issue date:2010

Publication year:2010

Report number:POWER2010-27240

Pages:777-784

Language:English

CODEN:AMEPEJ

ISBN-13:9780791849354

Document type:Conference article (CA)

Conference name:ASME 2010 Power Conference, POWER 2010

Conference date:July 13, 2010 - July 15, 2010

Conference location:Chicago, IL, United states

Conference code:86630

Sponsor:Power Division

Publisher:American Society of Mechanical Engineers, 3 Park Avenue, New York, NY 10016-5990, United States

Abstract:The two-floor flow passages pumping system with the simple structure is well practical in the Basin of Yangzi River downstream. However, this kind of pumping system has some disadvantages, such as low efficiency, easy to appear submerse vortex in discharge flow passages which causes the unit vibration and does harm to the operating of pump unit. In order to solve these problems, the design scheme with a new curve of diffusing outlet structure and inlet cone put forward, which are used in the renovation of the two-floor flow passages pumping station. With the numerical simulation of the two-floor flow passages pumping system, the flow fields are analyzed, and the external performance curves are obtained. To verify the calculation, a model tests were done using the standard model of pump?The test results are compared with the performance curves of numerical simulation. Good agreement of two results is found in the high efficiency area, which can show the calculation is believable. The new design improves the efficiency of pumping system significantly and eliminates the submerse vortex, also can guarantees the economy and security of operating. Copyright © 2010 by ASME.

Number of references:11

Main heading:Mathematical models

Controlled terms:Axial flow - Computer simulation - Efficiency - Floors - Flow simulation - Inlet flow - Pumping plants - Pumps - Structural design - Vortex flow

Uncontrolled terms:Design scheme - Discharge flow - Experimental studies - External performance - Flow passage - Model tests - New design - Outlet structures - Performance curve - Pumping stations - Pumping system - Pumping systems - Simple structures - The standard model - Two-floor - Yangzi River

Classification code:913.1 Production Engineering - 723.5 Computer Applications - 631.1 Fluid Flow, General - 921 Mathematics - 618.2 Pumps - 408.1 Structural Design, General - 402 Buildings and Towers - 446 Waterworks

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.

Accession number:20110313592544

Title:Adaptive neural control of MIMO nonlinear time-varying delay systems with minimum adjustable parameters

Authors:Zhou, Shujie (1); Xu, Lijuan (1); Zhang, Tianping (1)

Author affiliation:(1) College of Information Engineering, Yangzhou University, Jiangsu, Yangzhou 225009, China

Corresponding author:Zhang, T.(tpzhang@yzu.edu.cn)

Source title:Journal of Computational Information Systems

Abbreviated source title:J. Comput. Inf. Syst.

Volume:6

Issue:12


Issue date:December 2010

Publication year:2010

Pages:3977-3985

Language:English

ISSN:15539105

Document type:Journal article (JA)

Publisher:Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States

Abstract:Based on the principle of variable structure control, an improved adaptive control scheme is proposed for a class of more general uncertain MIMO nonlinear time-varying delay systems with unknown disturbances and nonlinear dead-zones. Neural networks are utilized to approximate the unknown nonlinear functions in the design. The unknown time-varying delay uncertainties are compensated for using appropriate Lyapunov-Krasovskii functionals. The restrictions of the control gains are relaxed by utilizing the quadratic-type Lyapunov functions. Only one adaptive parameter needs to be adjusted in each subsystem, and the complexity of control algorithm is reduced. It is proved that the proposed design method is able to guarantee semi-global uniform ultimate boundness of all the signals in the closed-loop system. Finally, simulation results are presented to illustrate the effectiveness of the proposed approach. © 2010 Binary Information Press.

Number of references:22

Main heading:Adaptive control systems

Controlled terms:Algorithms - Control theory - Lyapunov functions - Neural networks - Sliding mode control - Time varying control systems - Time varying networks - Variable structure control

Uncontrolled terms:Adaptive Control - Adaptive control schemes - Adaptive neural control - Adaptive parameters - Adjustable parameters - Boundness - Control algorithms - Control gains - Dead-zone - Design method - Lyapunov-Krasovskii functionals - Nonlinear functions - Semi-global - Simulation result - Sliding modes - Time varying delay systems - Time-varying delay - Unknown disturbance - Unknown time-varying delays

Classification code:703.1 Electric Networks - 723 Computer Software, Data Handling and Applications - 723.4 Artificial Intelligence - 731.1 Control Systems - 731.3 Specific Variables Control - 921 Mathematics

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.

Accession number:20110313597253

Title:Study and application on optimization scheme of water distribution in gravity irrigation district of large-scale plain

Authors:Chen, Xing (1); Cheng, Jilin (2); Jiang, Xiaohong (2)

Author affiliation:(1) College of Energy and Power Engineering, Yangzhou University, Jiangsu Province, 225009, China; (2) College of Hydraulic Science and Engineering, Yangzhou University, Jiangsu Province, 225009, China

Corresponding author:Cheng, J.(jlcheng@yzu.edu.cn)

Source title:2010 World Automation Congress, WAC 2010

Abbreviated source title:World Autom. Congr., WAC

Monograph title:2010 World Automation Congress, WAC 2010

Issue date:2010

Publication year:2010

Pages:185-194

Article number:5665476

Language:English

ISBN-13:9781424496730

Document type:Conference article (CA)

Conference name:2010 World Automation Congress, WAC 2010

Conference date:September 19, 2010 - September 23, 2010

Conference location:Kobe, Japan

Conference code:83391

Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States

Abstract:Large-scale irrigation district is the main force of Chinese grain production and becomes the major part of water consumers on agriculture water, which makes it very important for the irrigation management to pay attention to the study on the water distribution optimization of irrigation district. According to the characteristics of large-scale plain and gravity irrigation district, this paper takes the largest irrigated area as the objective function in some type of hydrological year and uses four kinds of irrigation system which include continued irrigation, continued irrigation of main canals with hierarchical controls, rotation irrigation in segments and rotation irrigation in individuals to make scheme optimizations for wate.distribution program. Besides that this paper takes water level calculations for the main canals by using the steady non uniform flow model and gate-hole water flow mathematical model. Also it adopts experimental optimization method to carry out the scheme comparison among the opening degree of several control sluices in order to choose the optimal opening degree program. Taking Hongjin irrigation district in Jiangsu Province for example, this paper makes the simulation of scheme optimization whose result shows that the gravity irrigated area with best irrigation scheme is about 25% larger than with the worst one.

Number of references:10

Main heading:Irrigation canals

Controlled terms:Hydraulic structures - Irrigation - Mathematical models - Optimization - Rotation - Water levels - Water supply systems

Uncontrolled terms:Experimental optimization - Grain production - Gravity irrigation area - Gravity irrigation district of large-scale plain - Hierarchical control - Hydrological years - Irrigation districts - Irrigation management - Irrigation schemes - Irrigation systems - Jiangsu province - Non-uniform flow model - Objective functions - Opening degree - Optimization scheme - Scheme optimization - Study and applications - Water distribution optimization - Water distributions - Water flows

Classification code:921 Mathematics - 821.3 Agricultural Methods - 614.2 Steam Power Plant Equipment and Operation - 921.5 Optimization Techniques - 611 Hydroelectric and Tidal Power Plants - 446.1 Water Supply Systems - 441 Dams and Reservoirs; Hydro Development - 601.1 Mechanical Devices

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.

Accession number:20110313592567

Title:A goal-driven self-adaptive software system framework based on agent

Authors:Li, Bin (1); Zhang, Xiaowei (1); Zhu, Junwu (1)

Author affiliation:(1) College of Information Engineering, Yangzhou University, Yangzhou 225009, China

Corresponding author:Li, B.(lb@yzu.edu.cn)

Source title:Journal of Computational Information Systems

Abbreviated source title:J. Comput. Inf. Syst.

Volume:6

Issue:12


Issue date:December 2010

Publication year:2010

Pages:4195-4205

Language:English

ISSN:15539105

Document type:Journal article (JA)

Publisher:Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States

Abstract:In this paper, a self-adaptive software system framework is proposed. The requirement model layer to Agent layer mapping mechanism is given to achieve the automatic conversion from requirement layer to implementation layer. The detailed work includes proposing a new goal-driven self-adaptive software system design framework based on agent (GASF); analyzing the main functions of each layer of GASF; defining model concepts (role, goal, plan, resource, activity and restriction) as well as three model methods (goal modeling method, plan modeling method and restriction modeling method); proposing mapping rules which mapping model concept and model method in requirement model of GASF to Agent based on JADE platform; developing the GASF2J (GASF-to-JADE) prototype system based on Eclipse platform. © 2010 Binary Information Press.

Number of references:12

Main heading:Software agents

Controlled terms:Mapping - Multi agent systems - Silicate minerals - Software design - Systems analysis

Uncontrolled terms:Agent based - Automatic conversion - Concept and model - Goal modeling - JADE - Mapping mechanism - Mapping model - Mapping rules - Modeling method - Prototype system - Self-adaptive software - Target Model - Three models

Classification code:482.2 Minerals - 723.5 Computer Applications - 902.1 Engineering Graphics - 961 Systems Science

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.

Accession number:20110313592556

Title:A novel hybrid evolutionary algorithm for the integrated model of collaborative planning and scheduling with tasks dividable

Authors:Bao, Zhenqiang (1); Wang, Guijun (1); Bao, Rong (2); Ding, Quanxun (1); Pan, Quanke (3)

Author affiliation:(1) Information Engineering College, Yangzhou University, Yangzhou 225009, China; (2) Microelectronics Institute, Xidian University, Xi'an 710071, China; (3) School of Computer Science, Liaocheng University, Liaocheng 252059, China

Corresponding author:Bao, Z.(yzbzq@163.com)

Source title:Journal of Computational Information Systems

Abbreviated source title:J. Comput. Inf. Syst.

Volume:6

Issue:12


Issue date:December 2010

Publication year:2010

Pages:4099-4108

Language:English

ISSN:15539105

Document type:Journal article (JA)

Publisher:Binary Information Press, P.O. Box 162, Bethel, CT 06801-0162, United States

Abstract:Due to the lack of processing capacity in workshop, we need to outsource productive tasks to our partners. In this paper, an integrated model of collaborative planning and scheduling with tasks dividable is established, which aims to reach the target of minimum sum with collaborative fee and processing cost. Because of the necessary in synchronous decision-making with continuous and discrete problems that mixed together, a novel hybrid evolutionary algorithm is presented. An integrated encoding scheme with collaborative planning encoding and scheduling encoding in one chromosome is designed for the algorithm, which uses differential evolution algorithm for continuous optimization, and genetic algorithm for discrete optimization. As a result, we obtain collaborative optimization in the two phases of production planning and scheduling. The experimental results show that the proposed algorithm is an effective method to solve the integrated problem of collaborative planning and scheduling. © 2010 Binary Information Press.

Number of references:8

Main heading:Evolutionary algorithms

Controlled terms:Biology - Decision making - Encoding (symbols) - Mathematical models - Optimization - Production control

Uncontrolled terms:Collaborative optimization - Collaborative planning - Continuous optimization - Differential evolution algorithms - Discrete optimization - Discrete problems - Encoding schemes - Hybrid algorithms - Hybrid evolutionary algorithm - Integrated models - Job-Shop scheduling - Outsource - Processing capacities - Processing costs - Production planning and scheduling

Classification code:461.9 Biology - 723.2 Data Processing and Image Processing - 731.1 Control Systems - 912.2 Management - 921 Mathematics - 921.5 Optimization Techniques

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.

Accession number:20110813676552

Title:Car body hybrid design technology in forward and reverse way

Authors:Jiang, Nan (1); Wang, Heng (1); Liu, Hui (2); Hu, Xuelong (3)

Author affiliation:(1) School of Mechanical Engineering, Yangzhou University, Yangzhou, China; (2) Siyang Productivity Promotion Center, Suqian, China; (3) Yangzhou University, Yangzhou, China

Corresponding author:Jiang, N.(jndesign9@126.com)

Source title:2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Abbreviated source title:IEEE Int. Conf. Comput.-Aided Ind. Des. Concept. Des., CAID CD

Volume:1

Monograph title:2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Issue date:2010

Publication year:2010

Pages:156-161

Article number:5681384

Language:English

ISBN-13:9781424479719

Document type:Conference article (CA)

Conference name:2010 IEEE 11th International Conference on Computer-Aided Industrial Design and Conceptual Design, CAID and CD'2010

Conference date:November 17, 2010 - November 19, 2010

Conference location:Yiwu, China

Conference code:83807

Sponsor:IEEE Beijing Section; Zhejiang University; Ind. Des. Inst., Chin. Mech. Eng. Soc.

Publisher:IEEE Computer Society, 445 Hoes Lane - P.O.Box 1331, Piscataway, NJ 08855-1331, United States

Abstract:The advantages and disadvantages of car body design with the forward and the reverse way is discussed. Hybrid design process with forward and reverse way for car body is proposed. Hybrid design interface technology of car body is study. The three different types of data interface are given. Combined with the hybrid design examples, the new design manner is realized. © 2010 IEEE.

Number of references:5

Main heading:Railroad cars

Controlled terms:Conceptual design - Product design

Uncontrolled terms:Car bodies - Car body design - Data interfaces - Forward designs - Hybrid design - New design - Reverse design

Classification code:408 Structural Design - 682.1.1 Railroad Cars - 913.1 Production Engineering

DOI:10.1109/CAIDCD.2010.5681384

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.


Accession number:20110413618060

Title:Multi-level weighted sequential pattern mining based on prime encoding

Authors:Li, Yun (1); Sun, Lianglei (1); Yin, Jiang (1); Bao, Wenyan (1); Gu, Mengyuan (2)

Author affiliation:(1) College of Information Engineering, Yangzhou University, Yangzhou 225009, China; (2) College of Software, Nanjing University, Nanjing 210005, China

Corresponding author:Li, Y.(liyun@yzu.edu.cn)

Source title:International Journal of Digital Content Technology and its Applications

Abbreviated source title:Int. J. Digit. Content Technol. Appl.

Volume:4

Issue:9


Issue date:December 2010

Publication year:2010

Pages:8-16

Language:English

ISSN:19759339

Document type:Journal article (JA)

Publisher:Advanced Institute of Convergence Information Technology, 707 Seokjang-dong, Gyeongju, Gyeongbuk, Korea, Republic of

Abstract:Encoding can express the hierarchical relationship in the area of mining the multi-level sequential pattern, up to now all the algorithms of which find frequent sequences just according to frequency, but items have different importance in the real applications, therefore the weight constraint involved to the entire mining process is crucial. The MWSP algorithm based on the candidate generation-and-test approach is one of the best algorithms of the weighted sequential pattern mining, however, which will easily generate the situation of candidate combinatorial explosion during the mining process. Therefore, this paper presents the algorithm PMWSM, which adopts prime encoding to decide the parent-child relationship between different levels by one step of division operation, introduces the concept of K-minimum weighted support count to push weight constraint into the multi-level sequential pattern mining, utilizes the principle of prefix projection database to avoid the occurrence of candidate combinatorial explosion, and takes full advantage of the minimum weighted support count to optimize the algorithm. The experimental results show that the algorithm PMWSM is more effective than the algorithm MWSP on mining multi-level weighted sequential patterns from the sequence database.

Number of references:6

Main heading:Combinatorial mathematics

Controlled terms:Algorithms - Encoding (symbols) - Mining

Uncontrolled terms:Candidate generation - Combinatorial explosion - Frequent sequences - Minimum weighted support - Mining process - Multi-level - One step - Prime encoding - Projection database - Real applications - Sequence database - Sequential patterns - Sequential-pattern mining - Weight constraints - Weighted sequential pattern - Weighted sequential pattern mining

Classification code:502.1 Mine and Quarry Operations - 723 Computer Software, Data Handling and Applications - 723.2 Data Processing and Image Processing - 921 Mathematics - 921.4 Combinatorial Mathematics, Includes Graph Theory, Set Theory

DOI:10.4156/jdcta.vol4. issue9.2

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.


Accession number:20110113554479

Title:Costume and the self-extension: The functions of costume in Elmer Gantry from the perspective of material culture

Authors:Luo, J.W. (1); Yu, K. (1)

Author affiliation:(1) School of Foreign Language, Yangzhou University, 225009, China

Corresponding author:Luo, J. W.(Irene_lo2002@hotmail.com)

Source title:Applied Mechanics and Materials

Abbreviated source title:Appl. Mech. Mater.

Volume:33

Monograph title:Advances in Functional Manufacturing Technologies

Issue date:2010

Publication year:2010

Pages:474-478

Language:English

ISSN:16609336

ISBN-13:9780878492367

Document type:Conference article (CA)

Conference name:2nd International Conference on Functional Manufacturing Technologies, ICFMT 2010

Conference date:August 6, 2010 - August 9, 2010

Conference location:Harbin, China

Conference code:83186

Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany

Abstract:As the other creation of material culture, clothes have concrete forms, and reflect the wearer's taste and appreciation of beauty while provide certain social significance. This paper attempts to analyze the connection between the costume of the hero Elmer Gantry in the novel Elmer Gantry and his self-identity, then to discover how the novelist, Sinclair Lewis ,the first Nobel Prize winner in the USA, by describing the costume of the character, explores the different inner self-identities of one man. © (2010) Trans Tech Publications.

Number of references:5

Main heading:Manufacture

Uncontrolled terms:Costume - Elmer gantry - Extension - Inner-self - Nobel prizes

Classification code:537.1 Heat Treatment Processes

DOI:10.4028/www.scientific.net/AMM.33.474

Database:Compendex

Compilation and indexing terms, Copyright 2011 Elsevier Inc.


Accession number:20110213557660

Title:Synchronous suspension control study for spherical reluctance driving joint with magnetic levitation

Authors:Zen, Li (1); Wang, Jun (1); XuYuanYuan (1)

Author affiliation:(1) Mechanical Engineering College, Yangzhou University, Yangzhou, 225127, China

Corresponding author:Zen, L.(13665203656@163.com)

Source title:Applied Mechanics and Materials

Abbreviated source title:Appl. Mech. Mater.

Volume:34-35

Monograph title:Mechanical Engineering and Green Manufacturing

Issue date:2010

Publication year:2010

Pages:1471-1476

Language:English

ISSN:16609336

Document type:Conference article (CA)

Conference name:International Conference on Mechanical Engineering and Green Manufacturing 2010, MEGM 2010

Conference date:November 19, 2010 - November 22, 2010

Conference location:Xiangtan, China

Conference code:83187

Sponsor:National Natural Science Foundation of China; Shanghai Jiao Tong University; South China University of Technology; National University of Defense Technology; Central South University (CSU)

Publisher:Trans Tech Publications, P.O. Box 1254, Clausthal-Zellerfeld, D-38670, Germany

Abstract:This paper presents a novel Multi-Degree-of-Freedom magnetic levitation sphere driving joint. It analyses the relevance theory of air-gap magnetic energy of the mechanic and electric energy transformation while the magnetic levitation force and electromagnetic torque were generated by driving joint, which based on the principles of state reconstruction. It achieves state synchronization suspension control and self-test feedback control without sensor of the rotor. The simulation experiment shows that the state synchronization suspension control owns high precision and interference immunity. © (2010) Trans Tech Publications.

Number of references:7

Main heading:Magnetic levitation


Yüklə 2,34 Mb.

Dostları ilə paylaş:
1   ...   47   48   49   50   51   52   53   54   ...   69




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin