Ednesday, 9 June Session 3a 900 Keynote

Sizin üçün oyun:

Google Play'də əldə edin


Yüklə 437.73 Kb.
səhifə1/4
tarix26.10.2017
ölçüsü437.73 Kb.
  1   2   3   4

Symposium 1

Theory of Alloys and Phase Transformations

Wednesday, 9 June
Session 3a

900

Keynote

Effect of the Phase and Structural Transformation on the Mechanical and Functional Properties of the Titanium Alloys

A.A. Ilyin, MATI-Russian State Technology University after Tsiolkovsky K.E., Russia

I.S. Polkin, All-Russia Institute of Light Alloys, Russia


Development Perspectives of Titanium Alloys

V.N. Moisseev, N. V. Syisoyeva, All-Russian Institute of Aircraft Materials, Russia


New Tendencies in the High-Temperature Strength Enhancement of the Titanium Based Alloys

L.D. Kulak, O.I. Blankovsky, S.A. Firstov, Institute for Problems of Materials Science, NAS, Ukraine


Structure of Solid Ti-Al Solutions with Aluminium Content Less than 7.5%

S.S. Ushkov, I.N. Razuvaeva, CRISM "Prometey", Russia


Formation of 2 in Near- Ti-Al Alloys

H. Liew , G.D. W. Smith , Department of Materials, University of Oxford, UK

J.Koike, A.Cerezo, Department of Materials Science, Tohoku University, Japan
Session 4a

1120

About the Combined Approach for Estimates of Ability to Mutual Solubility of Chemical Elements in a Solid-State Titanium

L.N. Grishchishyna, V.N. Minakov, V.I.Trefilov, The I.N. Frantsevich Institute for Problems of Materials Science, NASU, Ukraine


About the Purposefulness of Introduction of the Terms of Aluminum and Molybdenum Strength Equivalents of Alloying Elements in Titanium Alloys

B.A. Kolachev, D.V. Ryndenkov Russian State Technological University named after K. Tsiolkovsky, Russia

V.A. Volodin, Normal Corporation, Russia
Phase Evolution of Pure Titanium and Ti-6Al-4V Alloy During Continuous Heating Process

Guo Zhanli, W. Sha, Department of Civil Engineering the Queen's University of Belfast, UK


Phase Stability in Nitrogen-Containing Ti-64 and Ti-17

M.F.X. Gigliotti, B.P. Bewlay, General Electric Company, Corporate Research and Development, USA


Session 5a

1440

Mechanisms of Martensite Formation and Tempering in Titanium Alloys and Their Relationship to Mechanical Property Development

O.M. Ivasishin, Institute of Metal Physics, National Academy of Sciences, Ukraine

H.M. Flower, Imperial College of Science, Technology and Medicine (ICSTM), UK

G.Luetjering, Technical University Hamburg-Harburg, Germany


A Critical Analysis of the / Interface Phase in Ti-Based Alloy

Z.X. Guo, Q. Kang , Department of Materials Queen Mary & Westfield College, UK

D. Li, Q. Kang , Laboratory of Titanium Alloys, Institute of Metal Research, Chinese Academy of Sciences, China

Structural and Phase Transformations in Cold Strained Ultra Fine Grained Titanium Alloy

N.A. Drozdova, A.A. Popov, I.Yu. Pushmintsev, Ural State Technical University, Russia
The Features of Phase Transformations in Multicomponent Titanium Alloys of Space Engineering

O.M. Shapovalova, A.V. Shapovalov, I.A. Markova, E.V. Zolotko, Dniepropetrovsk State University, Ukraine


Investigation of Dynamic Recrystallization on Two-Phase Titanium Alloys Ti-6Al-2Mo-2Cr and Ti-6Al-4V

Jan Sieniawski, K.Kubiak, W.Ziaja, Department of Materials Science, Rzeszow University of Technology, Poland


Phase Transformations in Titanium with Hydrogen (Deuterium) at Large Plastic Deformation under Pressure

O.A. Elkina, R.N. Eshchenko, A.M. Patselov, V.P. Pilyugin, G.G.Taluts, Institute of Metal Physics, Ural Div., RAS, Russia


Session 6a

1700

Phase Transformation in Binary Titanium-Base Alloys with Metals of Groups I, IV-VIII of the Periodic Table

A.V. Dobromyslov, Institute of Metal Physics, Ural Div., RAS , Russia


Phase Transformations of Ti-6.8 Mo-4.5 Fe-1.5Al a Resistometric Study

J. Debuigne, F.Prima, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France


Role of the Phase Diagrams for Development Titanium Alloys

Yu.K.Kovnerisly and P.B.Budberg, Baikov Institute of Metallurgy and Material Science, Russian Academy of Science, Moscow, Russia


Carbides and Borides in Titanium Alloys Prepared by Rapid Quenching from the Melt

N.V.Syisoyeva, V.N. Moisseev, S.G. Glazunov, All-Russian Institute of Aviation Materials, Russia


Hydrides and Eutectoid Transformation Products in Ti-H Alloys

Caibei Zhang, Qiang Kang, Zuhan Lai, Department of Materials Science, College of Science, Northeastern University, China


Stability Studies of the Nitride Phase in the Ternary System Ti-Zr-N at 13500 С

J. Debuigne, E. Etchessahar, J.P. Bars, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France


Thursday, 10 JUNE
Session 7a

900

Phase Transformations and Deformation Structure in TiVCrAl Alloys

P. Blenkinsop, Y.G. Li, M. H. Loretto, IRS in Materials for High Performance Applications, The University of Birmingham, UK

D. Rugg , W. Voice , Rolls-Royce Plc, UK


Analysis of the Role of Plastic Deformation on the Transformation Kinetics of the Metastable -Cez Titanium Alloy

E. Gautier, E. Laude, D.Delannoy, P. Archambault, LSG2M- UMR CNRS/INPL/UHP, France


Relation between Athermal Phase and Isothermal Phase in Ti-V Alloys

Masahiko Ikeda, Shin-Ya Komatsu, Takashi Sugimoto, Faculty of Engineering, Kansai University, Japan

Yukiko Shibao, Graduate Student of Kansai University, Japan
Effect of Thermomechanical Processing on Evolution of -Phase Morphology in -Titanium Alloys

A. Bhattacharjee, Vydehi A. Joshi, S.M. Hussain, A.K. Gogia , Defence Metallurgical Research Laboratory, India


A Statistical EPMA Method for Characterising Fine Scale Chemical Heterogeneities in Non-Equilibrium Microstructures of - Metastable Titanium Alloys

T. Grosdidier, M.J. Philippe, LETAM, CNRS-URA 2090, France

Phase Transformations and Heat Treatments of Two New Beta Titanium Alloys

J. Debuigne, I.Thibon, INSA-Laboratoire de Metallurgie et Physico-Chimie des Materiaux, France


Session 8a

1120

Ageing of Deformed Alloys VT22I, Ti-10-2-3 with Hydrogen

A.A. Popov, A.G. Illarionov, A.V.Korelin, Ural State Technical University, Russia

M.Yu. Kollerov, Russian State Aviation Technological University, Russia
Attempts to Improve Mechanical Properties of -Titanium Alloys Due to Two Step Aging

E. Sukedai, J. Okuhara, H.Hashimoto, Okayama University of Science, Japan

C. Ouchi, NKK Corporation, Japan
Premartensitic Behaviour of the Supersaturated Phase in Ti Alloys

B.H. Choi, B.H. Lee, Department of Metallurgical Engineering, Kangnung National University, Korea

Y.T. Lee, S.E. Kim, S.J. Kim, Department of Materials Technology, Korea Institute of Machinery and Materials, Korea
Formation of Martensite and Superelasticity in the -Cez Titanium Alloy

T. Grosdidier, M.J. Philippe, LETAM, CNRS-URA 2090, France


Effects of Hydrogen on Stress-Induced Martensitic Transformation in Ti-10V-2Fe-3Al Alloy

Hao Zhang, Tosoh SMD, Inc., USA


Wednesday, 9 June

Session 3f, 4f, Poster symposium 1

900 - 1320

Structural Evolution of Nd-Rich Phase Particle in Ti-55 Alloy

G.P. Li, D.Li, Y.Y.Liu, Q.J. Wang, S.X.Guan, Department of Titanium Alloys Institute of Metal Research, Chinese Academy of Sciences, China
Influence of Hydrogen on the Low-Temperature Decomposition of Non-Equilibrium Solid Solutions in Titanium Alloys

M.A. Skotnikova, Saint-Petersburg Machine Building Institute, Russia

V.I.Syshchikov., S.S. Ushkov, CRISM “Prometey”, Russia

Study into Decomposition of Metastable -Phase During Isothermal Treatment in the VT35 Titanium-Based Alloy

A.G. Illarionov, A.A. Popov, D.A. Pumpiansky, Ural State Technical University, Russia
Precipitation of the Ordered Orthorhombic o-Phase in the Non-Stoichiometric Ti-Nb-Al Alloys

T.L. Trenogina V.A. Vozilkin, V.N. Derevyanko, Institute of Metal Physics, Ural Div., RAS, Russia


Study of O-phase Formation under the Ageing of Super-2 Alloy

S.L. Demakov, L.S. Stepanov, V.D. Kibalnic, Ural State Technical University, Russia


Formation "- and -Phases in the Ti-Os Alloys

A.V. Dobromyslov, V.A. Elkin, Institute of Metal Physics, Ural Div., RAS, Russia


The Features of the Formation of the Non-Equilibrium Phases in the Titanium-Copper alloys

A.V. Dobromyslov N.V. Kazantseva, Institute of Metal Physics, Ural Div., RAS, Russia

Phase Diagram of the Ti-Ga System

Antonova N.V., Tretyachenko L.A., Velikanova T.Ya., The I.N. Frantsevich Institute for Problems of Materials Science, NAS, Ukraine


Equation of State and Atomic Characteristics for Ti, TiC and TiN

D.A. Zakaryan, The I.N. Frantsevich Institute for Problems of Materials Science, NAS, Ukraine


Peculiarities of Phase Transformations and Properties of Aging Shape Memory Ti-Ni Alloys

L.I. Yurchenko, V.G. Pushin, T.G. Koroleva, A.Yu. Sokolova, Institute of Metal Physics, Ural Div., RAS, Russia


Microstructure and Martensitic Transformations in Rapidly Quenched from Melt TiNi, TiNiCo, TiNiFe Shape Memory Alloys

V.V. Popov, V.G. Pushin, T.E. Kunstevich, N.I. Kourov, Institute of Metal Physics, Ural Div., RAS , Russia

N.M. Matveeva, Baikov Institute of Metallurgy, RAS, Russia

Hardening of Titanium Alloys Using Concentrated Energy Flows

A.I. Gordienko, V.V. Ivashko, Physical-Technical Institute of National Academy of Sciences of Belarus, Republic of Belarus

Symposium 2

Intermetallics



Wednesday, 9 June

Session 3b

900

Keynote of USA

Gamma Alloy Technology 1999

Dennis M. Dimiduk, Paul A., Y-W. Kirn, Materials & Manufacturing Directorate, Air Force Research Laboratory, AFRL/MLLM, OH, USA

McQuay, Howmet Corporation Operhall Research Center, USA


Gamma-Based Titanium Aluminide Sheet/Stringer and Honeycomb Structures for Use in High Temperature Aerospace Applications

Clemens Helmut, Institut fuer Metallkunde, Universitaet Stuttgart, Germany

Leholm Robert, BF Goodrich Aerospace, USA
The role of Molybdenum and Boron in Near- Titanium Aluminides

Harvey M. Flower, Imperial College of Science, Technology and Medicine, UK

Julie A. Christodoulou, U.S. Office of Naval Research, International Field Office, Europe
Effect of Alloying on the Properties of Intermetallic Alloys Based on Gamma TiAl: Site Preference, Microstructure and Mechanical Behaviour

R. Yang, Y.L. Hao, D. Li, Institute of Metal Research, Chinese Academy of Sciences, China


Properties, Processing and Applications of -Based TiAl

Guether Volker, GfE Metalle und Materialien GmbH, Germany




Session 4b

1120

Structure Aspects of Heat Treatment Dependence of Tensile Properties of Gamma Ti-Al Based Alloy

Anoshkin N.F., Shakhanova G. V. , Smirnova T.R., All-Russia Institute of Light Alloys, Russia


Microstructure and Mechanical Properties of an Orhorhombic Titanium Aluminide Alloy

Kumpfert Jorg, DLR- Institute of Materials Research, Germany


Grain Size Effect on Phase Transformation During Continuous Cooling in Ti48Al2Cr2Nb Alloys

D. Hu, P.A. Blenkinsop, M.H. Loretto, University of Birmingham, UK


The Effect of Thermo-mechanical Processing on the Microstructure and Mechanical Properties of Orthorhombic Titanium Alloys

J.J. Colvin, M.R. Winstone, A. Partridge, Defence Evaluation and Research Agency (DERA), UK


The Effect of Microstructure and Lamellar Orientation on Cyclic Fatigue Life of -TiAl Alloys

M.R. Salmani, P.Bowen, IRS in Materials for High Performance Applications, The University of Birmingham, UK


Microstructures and Mechanical Properties of Prealloyed P/M Ti-22Al-27Nb

Satoshi Emura, Masuo Hagiwara, National Research Institute for Metals, Japan


Session 5b

1440

Research and Development of Titanium Aluminides in Chinese Aeronautics

Fu-Sheng Sun, C.X. Cao, J.X. Cao, J.M. Ma, M.G. Yan, Beijing Institute of Aeronautical Materials, China


Development of New Orthorhombic (Ti25Al25Nb)/SiC Intermetallic Composites for Advanced Space Applications

J. Coleto, J. Goni, C. Ortiz, J. Marcos, INASMET, Spain

G. Ramusat, ESA/ESTEC/QMO, The Netherlands
Modulated Microstructure and High Temperature Mechanical Properties of Mo-modified Orthorhombic Ti2AlNb-based Alloy

Feng Tang, Satoshi Emurai, Masuo Hagiwara, National Research Institute for Metals, Japan


Development of Fully Lamellar Microstructure with "Widmanstatten" Colonies in PM Ti-48Al-2Nb-2Cr Sheet Material

M.C Chaturvedi, Q. Xu, The University of Manitoba, Canada

Electronic Structural Study of Ordering Behaviour of Alloying Elements in Some Ti

Based Compounds

Dongsheng Xu, Yan Song, Dong Li, Zhuangqi Hu, Institute of Metal Research, Chinese Academy of Sciences, China
TEM Study on the Pyramidal Slip Dislocations in Ti3Al Single Crystals

Y. Minonishi, Institute for Advanced Materials Processing, Tohoku University, Japan


Session 6b

1700

Structure and Properties of Intermetallic TiAl(Cr,Mo,Si) Alloys for Lightweight Engine Parts

S. Knippscheer, G. Frommeyer, Max-Planck-Institut fur Eisenforschung GmbH, Germany


Hydrides in Thermally Charged Ti-24Al-14Nb-3V-0.5Mo Alloy

L.L. He, Laboratory of Atomic imaging of Solids, Institute of Metal Research, Chinese Academy of Sciences, China

L. Dong, C.B. Zhang, Northeastern University, China
Phase Transformation in the Ti-24%Al-12.5%Nb Alloy

S.L. Demakov, L.S. Stepanov, A.A. Popov, The Ural State Technical University, Russia


Deformation Behaviour Anomalies of Gamma Titanium Aluminides

O.V. Antonova, B.A. Greenberg, Institute of Metal Physics, Ural Branch, Russia

M. A. Ivanov, Institute of Metal Physics, National Academy of Sciences, Ukraine
Formation of Structure and Mechanical Properties of VTi-1 Alloy During Deformation and Heat Treatment

G.A. Bochvar, L.A. Bykova, L.I. Nikolaeva, All-Russia Institute of Light Alloys, Russia


Thursday, 10 JUNE

Session 7g, 8g; Poster symposium 2

900-1320

Superlight Heat-resistant TiAl3-based Alloys

T.A. Barmina, Yu.I. Ponomarev, Yu.K. Barmin, B.N. Podgorskij, K.M. Konstantinov, Joint-stock Research and Production Corporation "KOMPOZIT", Russia
HREM Observations of TiAl/Ti3Al Interfaces of the Lamellar Structure in the TiA (M) Intermetallics (M=Mn, Cr)

(HREM Observations of TiAl/Ti3Al Interfaces and Grain Boundaries in the TiAl Intermetallics)

L.L. He, R. Yu, H.Q. Ye, Laboratory of Atomic imaging of Solids, Institute of Metal Research, Chinese Academy of Sciences, China

L. Dong, Northeastern University, China


Liquid State Interaction in Titanium Carbonitride - Titanium Nickelide Alloys with Addition of Titanium, Zirconium, Niobium and Molybdenum

L.H. Askarova, I.G.Grigorov, E.V. Shipachev, A.N.Ermakov, V.V. Fedorenko, Yu.G.Zainulin Institute of Solid State Chemistry, Ural Branch of Russian Academy of Sciences, Russia


The Heterophase Structures of Titanium Aluminides Synthesized by Explosive Reaction Pressing

E.P. Romanov, B.A. Greenberg, S.V. Sudareva, Institute of Metal Physics, Ural Div., RAS, Russia

E.V. Shorokhov, Russian Federal Nuclear Centre-VNIITF, Russia
Nanocrystalline Ti-Ni-Alloys-New Class of Shape Memory Materials

V.G. Pushin, T.G. Koroleva , L.I.Yurchenko, S.B. Volkova, Institute of Metal Physics, Ural Div., RAS, Russia

N.M. Matveeva, Baikov Institute of Metallurgy, RAS, Russia
Structure, Phase Transformations and Properties of Polycomponent Shape Memory TiNi-alloys

V.G. Pushin, V.N.Khachin, L.I. Yurchenko, Institute of Metal Physics, Ural Div., RAS, Russia


Polycomponent Shape Memory Ti-Ni Alloys

V.G. Pushin, L. I. Yurchenko, N.V. Protasevich, V.N, Khachin, A.S. Chistyakov, K.A. Yurchenko, Institute of Metal Physics, Ural Div., RAS, Russia

Mechanisms of Recrystallization in TiAl-Based Intermetallic Alloy

Hersart de La Villemarque, Yann, C. Quesne, T. Baudin, R. Penelle, C.N.R.S.- Universite Paris-Sud Orsay, France


Phase Evolution, Stability and Microstructure-Mechanical Properties Relations in Orthorhombic Ti-Al-Nb-Ta Alloy

Y. Mao, D. X. Zou, J. W. Zhang, S. Q. Li, Z. Y. Zhong, Central Iron & Steel Research Institute, Beijing, China

J. H. Peng, Southwestern Jiaotong Universtity, Chengdu, China
Symposium 3

Microstructure, Physical and Mechanical Properties

Wednesday, 9 June
Session 3c

900

Keynote

Microstructure and Mechanical Properties of Titanium Alloys

J. Albrecht and G. Lutjering

Technical University Hamburg-Harburg, Germany


Relationship between Mechanical Properties, Microstructures and Parameters of Thermomechanical Processing under Complex Loading Conditions in Ti-6.5Al-3.5Mo-1.6Zr-0.27Si Alloy

O.A. Kaibyshev, M.V. Karavaeva, R.M. Kashaev, L.A. Syutina, V.K. Berdin, Institute for Metals Superplasticity Problems, Russia


Influence of Hot Deformation and Heat Treatment Regimes on Structure and Mechanical Properties of Titanium Alloy VT22

G. A. Salishchev, Institute for Metals Superplasticity Problems, RAS, Russia

I.V.Levin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

L.A. Smolyakova, JS “All-Russian Institute of Light Alloys”, Russia


Microstructure and Mechanical Property Relation of Ti-6Al-2Sn-2Zr-2Mo-2Cr-Si

Zhang Xiao-Dong, The Ohio State University, USA

W.A.Baeslack III, College of Engineering, The Ohio State University, USA

D.Evans, Materials Directorate, WL/MLLM, USA

T.Ginter, Dept. 73-C3, USA
Processing, Microstructure and Properties of Ti-6246

G. Luetjering, C. Sauer, Technical University Hamburg-Harburg, Germany


Session 4c

1120

Compositional Effects on Dynamic and Static Fracture Properties of Alpha-Beta Titanium Alloys in Laboratory Heats

B. B. Rath, M.A. Imam, Naval Research Laboratory, USA

I.L. Caplan, NSWC, Carderock Division, USA

R.W. Judy, Retired, USA


Analysis of Compositional Effects on Fracture and Stress Corrosion Cracking Properties of Titanium Alloys in Heavy Section Sizes

B. B. Rath, M.A. Imam, Naval Research Laboratory, USA

R.W. Judy, Retired, USA

I.L. Caplan, NSWC, Carderock Division, USA


Decomposition of Nonequilibrum Solid Solutions and Mechanical Properties of Titanium Alloys

M. A. Skotnikova, Saint-Petersburg Machine Bilding Institutte, Russia

S.S. Ushkov, CRISM “Prometey”, Russia
Assessment and Characterisation of Advanced Titanium Alloys in Non-standard Microstructural Conditions

P. Blenkinsop, A.R. Coleman, P. Bowen, IRS in Materials for High Performance Applications, The University of Birmingham, UK


Kinematical Mechanisms of Spallation in Shock-Loaded Titanium Alloys

Yu.I. Mescheryakov, N.I. Zhigacheva, A.K. Divakov, Institute of Mechanical Engineering Problems RAS, Russia

B.K. Barakhtin, CRISM "Prometey", Russia

Effect of Heat Treatment on Strength Properties of Two-Phase Titanium Alloys with Lamellar Microstructure

J. Sieniawski, W.Szkliniarz, R.Filip, K.Kubiak, University of Technology, Poland
Session 5c

1440

Microcrack Propagation in the LCF- and HCF-Regime in Ti-6Al-4V

G. Luetjering, J.A.Hines, J.O. Peters, Technical University Hamburg-Harburg, Germany


Influence of the Lazer Surface Treatment on the Fatigue Stress ( + )- Titanium Alloy VT3

V.L. Rodionov, I.S. Polkin, All-Russia Institute of Light Alloys, Russia


Influence of Grain Size and Cooling Rate on the Fatigue Performance of Titanium Alloys

Ivasishin O.M., Institute of Metal Physics, National Academy of Sciences, Ukraine

Luetjering G., Technical University Hamburg-Harburg, Germany
Cyclic Stress-Strain Response of High-Temperature Titanium Alloy IMI 834 under Thermomechanical Fatigue Conditions

H.J. Maier, S. Hardt, P.Pototzky, H.-J. Christ, Institute fur Werkstoffechnik University of Siegen, Germany


The Cyclic Deformation Behaviour of Ti-6Al-4V Alloy with Widmanstatten Microstructure

F.J. Gil, J.M. Manero, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, University Politechnique of Catalonia, Spain


High Strength State and Fatigue Properties of Nanostructured Titanium Alloys Processed by Severe Plastic Deformation

V.V. Stolyarov, L.O. Shestakova, A.I. Zharikov, V.V. Latysh, R.Z. Valiev, Institute of Physics of Advanced Materials Ufa State Aviation Technical University, Russia


Session 6c

1700

Internal Damage Characterization of Cyclically Loaded Ti-9Al-4V Specimens Using TEM and Non-Linear Acoustics

J. Maurer, J.Frouin, S.Sathish, T.Matikas, D.Eylon, The University of Dayton, USA


Change in Mechanical Properties of Ti-6Al-4V ELI and Pure Titanium During Fatigue Failure Process

Mitsuo Niinomi, Kei-ichi Fukunaga, Department of Production Systems Engineering, Japan

Toshikazu Akahori, Toyohashi University of Technology, Japan
"Ghost" Structure Effect on Fatigue Crack Initiation and Growth in the Titanium Alloy Ti-6Al-4V

K. Le Biavant, S. Pommier, C. Prioul, LMSS-Mat, Ecole Centrale Paris, France


Microstructure and Mechanical Properties of Hammer Forged Ti-10V-2Fe-3Al

W. Horvath, G. Weber, Böhler Schmiedetechnik GmbH & CO KG, Austria


Grain Growth Kinetics of Ti-0.2Pd: Effect of the Addition of Palladium on Pure Titanium

F.J. Gil, J..M. Manero, J.A. Planell, Dep. Materials Science and Metallurgical Engineering, ETSIIB, Spain

Picas J.A., Forn A., University Politechnique of Catalonia, Spain
The Hydrogen Effect on Fatigue Properties of Ti-6Al-4V Titanium Alloy at Different Parameters of Cyclic Loading

B.A. Kolachev , B.B. Bylov, Russian State Technological University named after K. Tsiolkovsky, Russia


Thursday, 10 June

Session 7c

900

Keynote

The Development of -Titanium Alloy

Hui Songxiao, Zhang Zhu, Zhang Shuqi, General Research Institute for Non-ferrous Metals, China
Rapid Heat Treatment of TIMETALR LCB Alloy

O.M. Ivasishin., P.E.Markovsky, D.G.Sawakin, Institute of Metal Physics, Ukraine

P.G. Allen, TIMET, Henderson Technical Laboratory, USA
Effects of Deformation and Heat Treatment on Mechanical Properties of -processed Ti-17

Takayuki Kidai, Hideto Ohyama, Titanium Matalls Technology Dept. KOBE STEEL, Ltd, Japan

Shinya Ishigai, Shoju Masaki, Steel Casting & Forging Plant. KOBE STEEL, Ltd, Japan

Takao Ikushima, Materials Technology Dept. Ishikawajima-Harima Heavy Industries Co., Ltd, Japan


Fatigue Crack Growths Mechanisms in Ti-10V-2Fe-3Al Alloys Produced Using Powder Blended Elemental Compacts

Teruo Kishi, Hisashi .Mori, Research Centre for Advanced Science and Technology, The University of Tokyo, Japan

P. Bowen, LRS in Materials for High Performance Applications/School of Metallurgy and Materials, The University of Birmingham, UK
Serviceability of VT35 Titanium Alloy with 1200-1500 MPa Strength

V.L. Rodionov, T.V. Ishunkina, E.S. Lebedeva, A.V. Demidenkov, All-Russia Institute of Light Alloys, Russia



Dostları ilə paylaş:
  1   2   3   4
Orklarla döyüş:

Google Play'də əldə edin


Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2017
rəhbərliyinə müraciət

    Ana səhifə