Ednesday, 9 June Session 3a 900 Keynote

Session 9e

14⁴⁰

Keynote

An Experience of Manufacture of Titanium Ingots and Slabs Containing up to 70% of Scrap, Using a Compacted Consumable Electrode

V.V. Tetyukhin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia
Evaluation of Superplastically Roll Formed VT-25

M. Gigliotti, B.P. Bewlay, General Electric Corporate Research and Development, USA

F.Z. Utyashev, O.A. Kaibyshev, Institute for Metals Superplasticity Problems, Russia
Development of a Processing Route for Blisks from Ti-6Al-2Sn-4Zr-6Mo

(Ti-6-2-4-6)

G. Terlinde, G. Proske, G. Fischer, OTTO FUCHS Metallwerke, Germany
The Influence of Initial Structure and Rapid Heating on the Hot Deformation Behaviour

VT3-1 Alloy

R.G. Koknaev, S.V. Haritonin, V.A. Rogojin, A.V. Filimonov, All-Russia Institute of Light Alloys, Russia
Gas Absorption in Titanium Alloys upon Heavy Forging

S.N.. Khomov, CRISM "Prometey", Russia

Session 10e

17⁰⁰

Compressor Disks of Refractory Titanium Alloys with Variable Structure and Chemical Composition in Different Zones

V.L. Rodionov, M.Ya. Brun , O.P. Yevmenov, Ya.L. Solomonik, A.A. Gelman , All-Russia Institute of Light Alloys, Russia

Evolution of Structure in Titanium Alloys during Severe Plastic Deformation and Heating

L.O. Shestakova, G. I. Raab, A.R. Kilmametov, V.V. Stolyarov, I.V. Alexandrov, Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, Russia

Application of Reversible Hydrogen Alloying for the Purpose of Improving Workability and Mechanical Properties of High Temperature Strength (+₂) - Titanium Alloys

A.A. Ilyin, A.M. Mamonov, V.K. Nosov, Y.N. Kusakina, MATI named after Tsiolkovsky K.E.-Russian State Technology University, Russia

Automated Line for Isothermal Stamping of Large-Sized Workpieces of Titanium Alloys

B.M. Gotlib, M.B. Gotlib, The Ural State Academy of Railway Transport, Russia

The Modelling of Titanium Billet Conversion Process

M. Klimov, A. Arvind, G. Li, J. Fluhrer, Corporation Scientific Foming Technologies, USA

Effects of Thermal Deformation Parameters on Microctrusture of Ti-17 Alloy

Wang Youn Liang, Wang Xi zhe,

Friday, 11 June
Session 11e

9⁰⁰

Advance Technology for Titanium Alloy Investment Castings

Yuyong Chen, Xiumei Qi, Xiaoyue Wang, Jing Tian, Jun Jia, National Key Laboratory for Metal Precision Hot Process, Habin Institute of Technology, China
Castability and Hot Workability of Titanium Alloys

H.G. Suzuki, National Research Institute for Metals, Japan

H.Hayakawa,Taiheiyo Metals Co., Japan

D. Eylon, University of Dayton, USA

Microstructure and Porosity of Cast -TiAl

J. Zhang, Z.H.Zhang, D.X.Zou, Z.Y.Zhong, Central Iron and Steel Research Institute, China

Hydrogen Technology of Gas-Static Treatment (HIP) of Titanium Alloys Castings

A. A. Ilyin, A. M. Nadegin, E.L. Bibikov, S.V. Skvortsova, MATI named after Tsiolkovsky K.E.-Russian State echnology University, Russia

Investigation of Influence of Electron Beam Treatment on Casting Properties of Titanium-Based Alloys

D.V. Sukhodolskiy , N.I. Levitsky, Physico-Technological Institute of Metals and Alloys of NASU, Ukraine

Quality of Billets and Hot-Rolled Bars in Titanium Alloys to Be Used in Aerospace Parts

I.V. Levin, V.S. Dushin, A.V. Trubochkin, O.O. Leder, L.G.Kurochkina, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Thursday, 10 June

Session 7f, 8f; Poster symposium 9

9⁰⁰

Ti 6-2-4-6 Comparison of Different Forging Processes

J.F. Uginet, Service Metallurgie, France
Experimental Modelling of Forming Ring Forged Pieces of Complex Shape in Isothermal Forging

V.I. Frolov, A.P. Matveyenkov, Joint-stock Research and Production Corporation "KOMPOZIT", Russia

The Peculiarities of Heavy Forging of Titanium Alloys

S.N. Khomov, CRISM "Prometey", Russia

Analysis of the Process for Titanium Alloy Plate Forming during Hot Polling and updating of the Equipment to Improve Plate Flatness

I.A. Shur, Yu. M. Sigalov, All-Russia Institute of Light Alloys, Russia

Development and Investigation of Technology for Production of Large Titanium Castings for Propeller Blades

S.S. Ushkov, L.G. Krouglov, Yu.A. Filin, CRISM "Prometey", Rusia

Titanium Alloy Ingot Produced by the Method of Scrap Electron-Beam Remelting

M.A. Golub, I.I. Shatskij, Joint-stock Research and Production Corporation "KOMPOZIT", Russia

V.A. Tchernov, All-Russia Power Institute, Russia
Reprocessing and Utilization of Titanium Alloy Waste at the Foundries

Yu.K.Okunev, A.S. Barantsev, L.G. Krouglov, Yu.A Filin, CRISM "Prometey", Russia

Titanium Nickelide-Base Casting Superalloys

S.S. Ushkov, Yu.A. Filin, L.I. Amosova, CRISM "Prometey", Russia

New Binding Materials for Manufacture of Shell Molds at Casting Titanium and High-Temperature Alloys

G.I. Shcherbakova, V.G. Antashev, N.N. Korneev, V.G. Gerlivanov, SRC RF GNIIShTEOS, Russia

Texture of Forging of an Alloy BT6C

A.S. Shishmakov , S.V. Grebenkin, A.V. Stepanenco

The Ural State Academy of Raylway Transport, Russia

The Ural State Technical University, Russia

About Nature of Dissipative Processes at Cutting Treatment of Titanium Blanks

S.S. Ushkov, CRISM "Prometey", Russia

M.A. Skotnikova, K.N.Voinov, M.A. Martynov, Saint-Petersburg Machine Building Institute, Russia
The Substantiation of Quenching and Ageing Conditions of VT23 Alloy Ensuring Good Machining

Y. B. Egorova, F.S.Mamonova, L.V.Davidenko, Russian State Technological University named after K. Tsiolkovsky, Russia

Mirror polishing of Ti-6Al-4V Alloy Using Lapping Tape

Koichi Kitajima, Department of Mechanical Engineering, Kansai University, Japan

Hideyuki Tomoda, Shutaro Yamamoto, Central Research Laboratory, Neos Co., Ltd, Japan

Masanori Nakai, Graduate School of Kansai University, Japan

Shinichi Nagaoka, Faculty of Science, Ehime University, Japan
Effect of Technological Features on Mechanical Properties Large-Sized Plates of Titanium Alloy 5V

A.S.Koudriavtsev, V.P. Sorokin, CRISM "Prometey", Russia

Possible Use of Local Superplastic Deformation Processes for Axialsymmetric Products in Titanium Alloys

V.V. Tetyukhin, A.I. Grishrchkin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

F.Z. Utyashev, O.A. Kalbyshev, IPSM, Russia
Manufacturing Processes for Seamless Tubes in Titanium Alloys Used at VSMPO

V.V. Tetyukhin, V.G. Smirnov, A.K. Gavrilov, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Usage of Screw-Rolling Mill in Production Process of Small Diameter Bars in Titanium Alloys

V.S. Dushin, L.G. Kurochkina, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

S.P. Galkin, V.K. Mikhailov, MISIS, Russia
Manufacture of Strips and Welded Tubes in Titanium Alloys

A.I.Grishechkin, A.N.Kozlov, A.M.Dmitrenko, V.A.Kizilov, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Quality of Mass-Produced Sheets, Plates, and Panels in Aerospace Grade Ti-6Al-4V Alloy

A.N. Kozlov, S.N. Polyanskiy, B.A. Yegorov, V.A. Barulenko, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Influence of Beta-Transformed Structure of Titanium Alloys on Fracture at Hot Plastic Deformation during Forging and Rolling

I.V. Levin, A.S. Shibanov, V.G. Korobshikov, G.V. Savvateeva, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

G.A. Salischev, IPSM, Russia
Beta-Field Forming of a Uniform Structure of Semi-Finished Products in Titanium Alloys with Improved Plasticity

I.V. Levin, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

I.V. Rodina, All-Russia Institute of Light Alloys Russia

G.A. Salichev, IPSM, Russia

Quality and Certification of VSMPO Products

A.N. Stroshkov, JSC “Verkhne-Saldinsk Metallurgical Plant”, Russia

Influence of Phase Transformation and Heat Treatments in and + Fields on Texture Evolution in CEX Alloy

R. Penelle, C. Quesne, T. Baudin, C.N.R.S.- Universite Paris-SUD Orsay, France

P. Bernadoni, M. H. Mathon, CEA Saclay, Laboratoire Leon Brillouin, France
Validation of Isothermal Upset Forging of TIMETAL -17 via Finite Element Analysis

Vasisht Venkatesh, S. P. Fox, TIMET- Henderson Technical Lab., USA

Promising technologies for automated manufacture of ship structural parts and other complicated structures of titanium alloys

Gorbach V.D., Stegantsev V.P., Kukin O.S.

Central Research Institute of Shipbuilding Technology (CRIST), Russia
Titanium Semi-Finished Products Manufactured from Chips

V.L.Girshov, Central Research Institute of Materials (CRIM), Russia

N.Vi.Pavlov, Saint-Petersburg State Technical University (S-PbSTU),Russia
Cast Titanium Alloy Having High Reliability

K.K. Jassinsky, E.N. Tarassenco, All-Russian Institute of Aviation Materials, Russia

Quality of Billets and Die-Forgings from Medium- and High-strength Titanium Alloys

A.S. Shibanov, V.B. Timokhov, S.V. Kaparulin S.V., V.M. Merzlyakov, Evdokimov, All-Russian Institute of Aviation Materials, Russia

Symposium10

Welding and Other Joining Methods

Thursday, 10 June
Session 7b

9⁰⁰

Keynote

Methods for Making Titanium Permanent Joints

B.E. Paton, V.N. Zamkov, V.P. Prilutsky , E.O. Paton Electric Welding Institute, Ukraine
Mechanical Properties of Friction Welds in High Strength Titanium Alloys

A. Wisbey, I.C. Wallis, C.M. Ward-Close, Defence Evaluation and Research Agency (DERA), UK

P. Sketchley, P.L. Threadgill, TWI, UK
Interface Characteristics on Inertia-Friction Welding of Ti600 Alloy.

Zhang Zhenqi,Yang Guanjun, Hong Quan, Luo Guozhen,, China North-west Institute for Non-ferrous Metal Research, China

Microstructure and Properties of Friction-Welds in Titanium Alloys

G. Luetjering, Technical University Hamburg-Harburg, Germany

D. Helm, MTU, Germany
Fracture Toughness of the Weldments of Thick Plates of Two Titanium Alloys

A.M. Irisarri, I. Eizaguirre, F. Santamaria, L.M. Plaza, FUNDACION INASMET, Spain

Session 8b

11²⁰

Electron-Beam Welding of Joints Made of Titanium Alloys

J.V. Avvakumov, PA “Sevmashpredprijatie”, Russia

L.V. Boykov, V.I. Mikhailov , CRISM “Prometey”, Russia.

V.N. Zamkov, O.K. Nazarenko, E.O. Paton Electric Welding Institute of NAS of Ukraine.

Enhanced Weld Penetrations in Titanium During GTA and Laser Welding Through Flux Applications

S. Marya, N.Perry, E. Soutif, Laboratoire Mecanique et Materiaux Ecole Centrale de Nantes, France

TIG Narrow Gap Welding of Titanium Alloys

S.S.Ushkov, V.I.Mikhailov, L.V.Boikov, CRISM “Prometey”, St.Petersburg, Russia

Development of Biocompatible Brazing Filler Alloys Suitable for the Brazing of Titanium

J. Breme, Universitat des Saarlandes, Germany

H.Muller, Biotronik GmbH, Germany
A study of Ti Brazing with Al-Ti-Al Alloy Clad Metal Sheet

Luo Guozhen, Hong Quan, Gu Lian , North-west Institute for Non-ferrous Metal Research, China

Serviceability of Thermomechanical Pipe Connections Formed by the Couplings Made from a Shape Memory Alloy

L.I. Amosova, S.S. Ushkov, S.N. Khomov, CRISM "Prometey", Russia

Friday, 11 June

Session 11f, 12f; Poster symposium 10

14⁴⁰-10⁰⁰

Effective Employment of Electron-Beam Process for Repairs of Goods from Titanium Alloys

B.G. Oushakov, CRISM "Prometey", Russia

General and Local Heat Treatment of High Strength Titanium Based Welding

V.S. Liasotskaya, S.I. Kniazeva, Russian State Technological University named after K. Tsiolkovsky, Russia

The Influence of Residual Welding Stress on Welding Procedure and Working Capacity of Welded Structure of - and near --titanium Alloys

V.I. Mikhailov, A.N. Khatuntsev, V.A. Sher, S.S. Ushkov, CRISM "Prometey", Russia

Brittle Fracture of Alpha-Titanium Alloy when Soldering and Methods of its Prevention

V.A. Semionov, CRISM "Prometey", Russia

Arc Welding with Tungsten Electrode in Controlled-Atmosphere Chamber

E.V. Andronov, V.J. Goncharon, A.N. Khatuntsev, CRISM "Prometey", Russia

V.L. Russo, St. Petersburg State Technical Marine University, Russia

J.V. Avvakumov, B.M. Zykov, PA “Sevmashpredprijatie”, Russia

Specific Features of Automatic Argon-Arc Welding of Titanium thin-Walled Tubes Butt Joints

V.A. Semionov, E.V. Abramov, A.V. Baranov, CRISM "Prometey", Russia

Calculation of Welded Joints of Tubes with Tube Walls Made of Titanium Talking Account Stress Concentration

V.A. Semionov, V.A. Zelenin, CRISM "Prometey", Russia

Technological Features of Welding of Titanium Multilayer Silphon Equalizers

V.A. Semionov, V.M. Polyakov, CRISM "Prometey", Russia

Activated Amorphous Soldering of Titanium and its Alloys

A.F. Vasiliev, B.V. Farmakovsky, D.I. Tchashnikov, CRISM "Prometey", Russia

Plants "Atmosphere" Type for Titanium Alloys Welding in High-Purity Argon

E.V. Andronov, CRISM "Prometey", Russia

Efficient Systems for Processing of High-Purity Argon at Welding Titanium Alloys in Plants of "Atmosphere" Type

E.V. Andronov, CRISM "Prometey", Russia

Brazing thin Sheet Structures of Titanium Alloys using STEMET^® Amorphous Brazing Filler Metal Foils

B. A. Kalin, O. N. Sevryukov, V.T. Fedotov, A. E. Grigoriev a *Moscow State Engineering Physics Institute (Technical University), Department of Physical Problems of Material Science, Russia

Yu. N. Kalinin, Tekhnomash Scientific and Production Association, Russia
Automated welding of titanium alloy thick-walled structures

V. D. Gorbach, V. P. Stegantsev, V.L. Chaban

Central Research Institute of Shipbuilding Technology (CRIST), Russia
Promising ways for improving an accuracy and performance of titanium alloy welded structures

V. D. Gorbach, V. P. Stegantsev, V.L. Chaban, Central Research Institute of Shipbuilding Technology (CRIST), Russia

Symposium11

Powder Forming, Spraying, Coatings

Thursday, 10 June
Session 7d

9⁰⁰

Keynote

Resent Situation of Ti Alloy Casting and P/M Technology

Chunxiao Cao, Fusheng Sun, Jijin Ma, Zhishou Zhu, Beijing Institute of Aeronatical Materials, China

Tao Lan, Yinjing Wu, Huiping Tang, Jianjun Lou, Northwest Institute for Nonferrous Metal Research, China

Zhenfeng Liang, Yixiang Cai, Guangzhou Research Institute of Nonferrous Metal, China

An Investigation of Porosity in HIPped and Heat Treated -TiAl Powder Compacts

S.J. Davey^a,b, M.A.Ashworth^a, P.I. Gouma^a,c, P.A.Blenkinsop <sup>a

a</sup> IRC in Materials for High Performance Applications, The University of Birmingham, UK

^b Now at Timet UK Limited, UK

^c Now at Department of Materials Science and Engineering, The Ohio State University, USA
Degassing Effect on the Microstructure and Mechanical Properties in a PM Ti-6Al-4V

Y.T Lee, Korea Institute of Machinery and Materials, Korea

M.Peters, DLR German Aerospace Research Institute, Germany
Synthesis of Ti-Cu-Zr Amorphous Alloys with Significant Supercooled Liquid Region by Mechanical Alloying

P.Y.Lee, K.C. Chen, Institute of Materials Engineering, National Taiwan Ocean University, Taiwan

Non-Equilibrium Processes in Dispersed Powdered Systems Based on Titanium

A.A. Smetkin, V.N. Antsiferov, S.N. Pecsherenko, Centre of Powder Metallurgy, Russia

Session 8d

11²⁰

Dehydrogenation and Sphericization of TiH₂ Powder by dc Plasma

Zhou Xiaoyong, Li Hua, Wei Haiming, Liang Zhenfeng, Guangzhou Research Institute of Non-ferrous Metal, China

Fan Yousan, Cui Xiaoming, Tsinghua University, China
Investigation on the Preparation of Titanium Powder with Low Oxygen Content by Hydrogen-Dehydrogen (HDH) Process

Chen Ping, Liang Zhenfeng, Fang Zhengwei, Li Hua, Cai Yixiang, Cui Liang, Guangzhou Research Institute of Non-ferrous Metal, China

Development and Application of Microporous Titanium Plates by Powder Rolling

Zhang Fuzheng, Liang Zhenfeng, Zeng Ming, Huang Shuiwang, Wu Chengping, Guangzhou Research Institute of Non-ferrous Metal, China

Bone Plates of Porous Titanium

V.M. Anokhin, A.N. Petrunko, Titanium Institute, Ukraine

A.E. Loskutov, I.M. Yakovenko, Medical-Production Association, “ORTEN”, Ukraine
Perspectives of Production Metallothermic Powder of Titanium

S.V. Aleksandrovskij, St.Petersburg State Mining Institute, Russia

A New Method of Titanium Phosphates as Perspective Materials of Electronic Engineering

V.I. Ivanenko , I.A. Udalova, E.P. Lokshin, V.A. Masloboev, I.V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Kola Science of the Russian Academy of Sciences, Russia

Thursday, 10 June

Session 9g, 10g; Poster Symposium 11

14⁴⁰-18⁰⁰

Production of Titanium Nanopowders in Chloride Melts

L.G. Gopienko, JSC VAMI, Russia

Pressing Regimes for details from titanium granular metalceramics materials

S.V Kapustnikova, I.E. Kazimirova, L.D. Kulak, N.N. Kuzmenko, State Metallurgy Academy of Ucraine, IPMS, Usraine

Powder Metallurgy of Titanium Alloys in Promising Trend in Manufacture of Closed Blade Disks in Aerospace Industry

G.G. Demchenkov, All-Russia Institute of Light Alloys, Russia

Isostatic pressure of high-strength titanium alloys

N.V. Yanovskaya, G.A. Bochvar, All-Russia Institute of Light Alloys, Russia

High-quality powders of titanium alloys and their application

M.A. Golub, Yu.I. Ponomarev, T.A. Barmina, Yu.K Barmin, Joint-stock Research and Production Corporation "KOMPOZIT", Russia

Structure and mechanical properties of pressed workpieces produced from TiAl spherical powders

M.A. Golub, Yu.I. Ponomarev, T.I. Barmina, Yu.K. Barmin, S.I. Sinelnikov, O.V. Panfilova, Joint-stock Research and Production Corporation "KOMPOZIT", Russia

Production of Articles from titanium alloys by hot Isostatic Pressing in Glass-Ceramics Shells with a Titanium Barrier Coating

S.A. Kuznetsov, F.A. Fekhetdinov, T.I. Avaeva, I.V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of Kola Science of the Russian Academy of Sciences, Russia

To the Question on Hardening Titanium Alloys by the Method an Higher-Temperature Nitrocementation with the High Nitrogenous Potential

V. Prudnikova, CRISM "Prometey", Russia

A.V. Ivanchenko, E.E. Skladnova, K.O. Smirnov, V.I. Shapochkin, Volgograd Srate University, Russia
Sintering the Powders of Ti-Based Alloys in the Container with the Melting Closure

Yu. M. Lytvynenko, S.M. Solonin, Institute for Problems of Materials Science, NASU, Ukraine

Research of Technology Deposition of Copper Alloys on Titanium and Titanium on Steel

A.E. Vainerman, I.V. Chumakova, CRISM "Prometey", Russia

Laser Deposited TiAl Alloys

Dr. Xiao-Dong Zhang, Department of Materials and Engineering The Ohio State University, USA

Dr. Daniel Evans, Materials Directorate, WL/MLLM, Wright Patterson AFB Dayton, USA

Professor Hamish L, Department of Materials and Engineering The Ohio State University , USA

Synthesis of Novel DeNOx Catalysts Based on Modified Titanium Dioxides

Z.R. Ismagilov, R.A. Shkrabina, L.T. Tsykoza, V.A. Sazonov, N.V. Shikina.

Boreskov Institute of Catalysis, Novosibirsk, Russia
Symposium 12

Metal Matrix Composites

Thursday, 10 June
Session 9d

14⁴⁰

Keynote

Development of a Mechanically Milled Titanium Particulate MMC`s

T. Hinder, A. Wisbey, P.S. Goodwin, C.M. Ward-Close, Defence Evaluation and Research Agency (DERA), UK
Development and Ballistic Testing of a Functionally Gradient Titanium Monoboride Ceramic/Titanium Applique

Gooch William A., Matthew S. Burkins, U.S. Army Research Laboratory Aberdeen Proving Ground, MD, USA

Bryan Chen, Jack Rubin, Richard Palicka, Cercom Incorporated Vista, CA, USA

Ravi Ravichandran, University of Utah Salt Lake City, Utah, USA

Microstructure and Mechanical Properties of Ti/Carbon Nanotube Composite prepared by Powder Metallurgy

T. Kuzumaki, O. Ujiie, K. Miyazawa, K. Ito, Dept. of Materials Science, School of Engineering,

The University of Tokyo, Japan
High Temperature Titanium Matrix Composites

J. Kumpfert, .H. J. Dudek, K. Weber, DLR-German Aerospace Center, Institute of Materials Research, Germany

Titanium Matrix Composites in Comparison with Ceramic Based Materials

L.D. Kulak, S.A. Firstov , Institute for Problems of Materials Science, NASU, Ukraine

V.I. Mazur, S.V. Kapustnikova, State Metallurgy Academy of Ukraine, IPMS, Ukraine
Session 10d

17⁰⁰

Ti-Matrix Composites Produced by an in Situ Precipitation of the TiB Hard Phase

M. Bram, F. Aubertin, J. Breme, Universitat des Saarlandes, Germany

In Situ Preparation of Titanium Base Composites Reinforced by TiB Single Crystals Using a Powder Metallurgy Technique

S. Gorsse., Y. Le Petitcorps, I.C.M.C.B. CNRS, France

TiB Particle-Reinforced Titanium Matrix Composites Synthesized by TiH₂-Boride Reactions

Li Diquan, Liang Zhenfeng , Luo Kai, Guangzhou Research Institute of Non-ferrous Metal, China

Combined Mechanical Alloying and Controlled Combustion Synthesis the TiH2-B System to Produce CMC`s

Sedat Ozbilen, Abdulkadir Gullu, Gazi University, Turkey

Cost-Effective Manufacture of Ti/SiC Fibre Composites

Z.X. Guo, C.M. Lobley, Department of Materials, Queen Mary & Westfield College, University of London, UK

Microstructures and Properties of Newly Developed Alpha Titanium- Ti₅Si₃ Alloys

G. Frommeyer, M.Kreuss, R.Rosenkranz, Max-Planck-Institut Fur Eisenforschung, Germany

Friday, 11 June
Session 11d

9⁰⁰

Investigation of the Properties of Diffusion Bonded and Vapour Deposited Titanium/Gamma Laminates

C.M. Ward-Close, C.B. Loader, S.J. Howard, Defence Evaluation and Research Agency (DERA), UK

Mechanical alloying of Ti-based alloys by the Zoz attritor

Ozbilen Sedat, Cemil Cetinkaya, Gazi University, Turkey

Grain Refinement and Improvement of Mechanical Properties of Reaction Sintered TiC Dispersed Ti-6Al-4V Alloy Composites Using Hydrogenation Treatment

M. Kobayashi, K. Funami, Dept. of Mechanical Engineering, Chiba Inst. of Technology, Japan

New Amorphous Constructional and Functional Titanium Alloys

Yu.K. Kovneristy, Baikov Institute of Metallurgy and Material Science, Russian Academy of Science, Moscow, Russia

P/M Titanium Metal Matrix Composite for Exhaust Valve

T. Furuta, T. Saito, Toyota Central Research and Development Laboratories, Inc., Japan

T. Yamaguchi, Toyota Motor Corporation, Japan

Thursday, 10 June

Session 9h, 10h Poster symposium 12

14⁴⁰-18⁰⁰
Powder Composition Materials on Titanium Base

S. Firstov, A. Yuga, V. Sointsev, L. Kulak, N. Kouzmenko, Institute for Problems of Materials Science, NASU, Ukraine

New structural Metalceramic Materials of Titanium Base

V.I. Mazur, S.V. Kapustnikova, S.A. Firstov, State Metallurgy Academy of Ukraine, IPMS, Ukraine

Ti-TiN MMC`s by Reactive Mechanical Alloying.

Sedat Ozbilen, Abdulkadir Gullu, Gazi University, Turkey

Formation of Ti-TiB MMC`s by Mechanical Alloying.

Ozbilen Sedat, Gazi University, Turkey

Grain growth in Pure Ti and Ti-Based Advanced Alloys Processed by Mechanical Alloying.

Sedat Ozbilen, Cemin Cetinkaya, Gazi University, Turkey

Development of the Some Technological Schemes for Production of the Composite Materials on the Base of Titanium Alloy

T.V. Ishunkina, A.V. Gingul, E.S. Lebedeva, All-Russia Institute of Light Alloys., Russia

Alloys Based on (Ti,V)C and (Ti, Nb)C

L.G. Bodrova, G.M. Kramar, V.V. Lazaryuk, Ternopol State Technical University, Ukraine

High-Temperature Oxidation of the Titanium and Niobium Carbidies Based Alloys

V.P.Bodrov, Ternopol State Pedagogical University, Ukraine

L.G. Bodrova, V.V. Lazaryuk, Ternopol State Technical University, Ukraine

Titanium in the Synthesis of High Hardness Ceramics on Cubic BN

T.Yu. Tchemekova, Yu.S. Polyachovsky, Institute of Silicate Chemistry of Russian Academy of Sciences, Russia

Yu.A. Alekseev, O.I. Francuzov, St. Petersburg State University, Russia

Thermal Shock Behaviour of Continuously Reinforced Titanium Matrix Composites

J. Coleto, J. Goni, A.M. Irisarri, C. Ortiz, Fundacion INASMET, Spain

Y. Le Petitcorps, CNRS-ICMCB, France

A. Martin, C. Garcia, I. Ocana, J.M. Martinez, CEIT, Spain

The Sinthesis of Intermfrtallic Compositions on Titanium Surface

V.Ya. Schevchenko, V.A. Zhabrev, S.I. Sviridov, Grebentshikov Institute of the Chemistry of Silicates of Russian Academy of Sciences (IChS RAN ), Russia

овый