Marc Andrew Hillmyer

Yüklə 0,71 Mb.
ölçüsü0,71 Mb.
  1   2   3   4   5

Marc Andrew Hillmyer

McKnight Presidential Endowed Chair, University of Minnesota

Department of Chemistry • 207 Pleasant St. SE • University of Minnesota • Minneapolis, MN 55455-0431

612.625.7834 • •


Ph.D. Chemistry, California Institute of Technology 1994

B.S. Chemistry, University of Florida 1989


College of Science and Engineering – University of Minnesota

Director, Center for Sustainable Polymers 2009–present

Department of Chemistry – University of Minnesota

McKnight Presidential Endowed Chair 2015–present

Distinguished University Teaching Professor 2014–present

Distinguished McKnight University Professor 2010–present
Professor 2009–2010

Elmore H. Northey Associate Professor, Professor 2004–2007, 2007–2009

Associate Professor 2002–2004
Assistant Professor 1997–2002

Department of Chemical Engineering and Materials Science – University of Minnesota

Graduate Faculty Member 1999–present

Postdoctoral Research Associate 1994–1997


Entrepreneurial Researcher Award (UMN) 2017

McKnight Presidential Endowed Chair (UMN) 2015

NSF Division of Materials Research, Special Creativity Extension 2014–2016

Postbaccalaureate, Graduate, and Professional Education Award (UMN) 2014

PTN Medema Award 2013

LE STUDIUM research fellow, Université d'Orléans/CNRS 2012–2013

Fellow of the Polymer Chemistry (POLY) Division of the ACS 2012

Carl S. Marvel Creative Polymer Chemistry Award (POLY division of the ACS) 2011

Distinguished McKnight University Professorship (UMN) 2010

IonE Fellow (UMN) 2010

George W. Taylor/IT Alumni Society Award for Distinguished Teaching (UMN) 2010

Fellow of the American Association for the Advancement of Science (AAAS) 2009

Visiting Professor, Université d'Orléans, France 2008

Arthur K. Doolittle Award (jointly awarded, PMSE division of the ACS) 2007

George Taylor Distinguished Research Award (UMN) 2007

Leverhulme Visiting Professor, University of Cambridge 2005–2006

Best Chemistry Instructor Award (UMN Institute of Technology Student Board) 2005

Elmore H. Northey Professorship (UMN) 2004–2009

George Taylor Career Development Award (UMN) 2002

National Science Foundation CAREER Award 2001–2005

Packard Fellowship for Science and Engineering 2000–2005

Schlumberger Limited Foundation Award 2000, 2001

Camille Dreyfus Teacher-Scholar Award 2000–2005

McKnight Land-Grant Professorship (UMN) 2000–2002

DuPont Young Professor Grant 1999–2001

Research Corporation Research Innovation Award 1998–2001

3M Company Non-tenured Faculty Award 1998–2002

IBM Graduate Research Fellowship 1992

American Institute of Chemists Student Award 1989

President’s Recognition Award (UF); College Scholar Award (UF); Summerville Fellowship in Chemistry (UF) 1989

professional service

Editor-in-Chief for the ACS journal Macromolecules 2018-present

Co-organizer of “Porous Polymers 2016” an ACS symposium 2016

Co-organizer for “Sustainable Polymers” an ACS workshop 2016

Chair, Chair Elect, Vice Chair – ACS Division of Polymer Chemistry 2017, 2016, 2015

Chair, Vice Chair – Polymers Gordon Conference 2015, 2013

Scientific Committee for a symposium at the E-MRS 2015 Spring Meeting 2015

Co-organizer of “Sustainable Resources and Renewable Resources” at 14th Pacific Polymer Conf. 2015

Co-organizer of “Porous Polymers 2014” an ACS symposium 2014

Co-organizer of “Sustainable Polymers, Processes and Product Applications” an ACS symposium 2014

ACS Division of Polymer Chemistry Awards Committee co-chair 2011–2014

Co-organizer for “Sustainable Polymers” an ACS workshop 2013

Presidential Green Chemistry Award Challenge selection panel 2012

International Advisory Committee MACRO 2012 - IUPAC World Polymer Congress 2012

Co-organizer of “Next-Generation Renewable Polymers” an ACS symposium 2012

Steering Committee - Minnesota Green Chemistry Forum 2010–2012

Scientific Committee for 19th Annual BioEnvironmental Polymer Society Meeting 2011

Participant in Chemical Sciences and Society Symposia (CS3) meeting on “Sustainable Materials” 2010

Co-organizer of “Functional Block Copolymer Assemblies” a PacifiChem symposium 2010

Co-organizer of “Porous Polymers” an ACS symposium 2009

Associate Editor for the ACS journal Macromolecules 2008–2017

Co-editor for “Biorenewable Polymers” special issue of Polymer Reviews 2007

Co-organizer of “Polymers from Renewable Resources” an ACS Symposium 2007

Editorial Advisory Board Macromolecular Chemistry and Physics 2007–2010

Co-organizer of “Multicompartment Micelles” an ACS Symposium 2006

International Advisory Committee for the RSC conference Materials Chemistry 8 2006–2007

Editorial Advisory Board for Polymer 2005–2009

Los Alamos National Lab Center for Integrated Nanotechnologies proposal review panel 2005–2007

Editorial Advisory Board Polymer Reviews 2005–2010

Editorial Advisory Board for the ACS journal Macromolecules 2004–2006

Co-organizer of “Polymer Chemistry for Physicists” short course, APS Meeting 2003

Co-editor for “Materials for the 21st Century Special Issue” for J. Phys. Org. Chem. 2000

Co-organizer “Macromolecular Synthesis by Selective Chemical Modification” an ACS Symposium 2000

ACS Division of Polymer Chemistry co-rep. to the ACS Macromolecular Secretariat 1998–2007

selected invited lectures

Xingda Lecture - Peking University College of Chemistry and Molecular Eng. – Peking, China January 2019

Inaugural Distinguished Lecturer - University of Waterloo, Inst. Polymer Research – Waterloo, Canada May 2018

Aldrich Lecture - UC Berkeley, Department of Chemistry – Berkeley, California January 2017

Plenary Lecture Intl. Conf. on Polymer Sci. & Tech. (MACRO2017) – Thiruvananthapuram, India January 2017

Plenary Lecture - Warwick Polymers 2016 – Warwick, England July 2016

Plenary Lecture - 8th Annual Triangle Soft Matter Workshop – Durham, North Carolina May 2016

Plenary Lecture - 1st Annual Green Materials Symposium – London, England December 2015

Whitby Memorial Lectureship - University of Akron, Dept. of Polymer Sci. – Akron, Ohio May 2015

CSE Public Lecture – UMN College of Science and Engineering – Minneapolis, Minnesota January 2015

Dow Lecture in Sustainability - Colorado St. Univ., Dept. of Chem. – Ft. Collins, Colorado October 2014

Xerox Lecture - Univ. of British Columbia, Dept. of Chemistry – Vancouver, Canada September 2014

Keynote Lecture - Canadian High Polymer Forum – Gananoque, Canada July 2014

Bayer Lecture - Cornell University, Dept. of Chemistry & Chemical Biology – Ithaca, NY November 2013

Aldrich Lecture - Columbia University, Department of Chemistry – New York, NY October 2013

Plenary Lecture - 2013 Dutch Polymer Days Conference – Lunteren, The Netherlands March 2013

Plenary Lecture - Warwick 2012 – Warwick, England July 2012

Grande Conférence IUPAC - Université de Montréal, Dept. of Chem.– Montreal, Canada March 2012

Keynote Lecture - 2011 Australasian Polymer Symposium – Coffs Harbour, Australia February 2011

Plenary Lecture - Int. Symp. on Nano Structured Polymeric Materials – Pohang, Korea November 2010

Plenary Lecture - Virginia Tech Technical Conference and Review – Blacksburg, Virginia October 2010

Plenary Lecture - 9th National Graduate Research Polymer Conference – Chapel Hill, NC June 2010

peer-reviewed publications

(362) Ting, J. M.; Ricarte, R. G.; Schneiderman, D. K.; Saba, S. A.; Jiang, Y.; Hillmyer, M. A.; Bates, F. S.; Reineke, T. M.; Macosko, C. M.; Lodge, T. P. – “Polymer Day: Outreach Experiments for High School Students” – J. Chem. Educ. 201794, 1629–1638. 10.1021/acs.jchemed.6b00767

(361) Saba, S. A.; Lee, B.; Hillmyer, M. A. – Tricontinuous Nanostructured Polymers via Polymerization-Induced Microphase Separation – ACS Macro Lett. 2017, 6, 1232–1236. 10.1021/acsmacrolett.7b00677

(360) Vidil, T.; Hampu, N. – Nanoporous Thermosets with Percolating Pores from Block Polymers Chemically Fixed above the Order−Disorder Transition – ACS Cent. Sci. 2017, 3, 1114–1120. 10.1021/acscentsci.7b00358

(359) Chopade, S. A.; Anderson, E. L.; Schmidt, P. W.; Lodge, T. P.; Hillmyer, M. A.; Bülhmann, P. – Self-Supporting, Hydrophobic, Ionic Liquid-Based Reference Electrodes Prepared by Polymerization-Induced Microphase Separation – ACS Sens. 2017, 2, 1498–1504. 10.1021/acssensors.7b00512

(358) Wilbon, P.; Swartz, J. L.; Meltzer, N. R.; Brutman, J. P.; Hillmyer, M. A.; Wissinger, J. E. – Degradable Thermosets Derived from an Isosorbide/Succinic Anhydride Monomer and Glycerol – ACS Sustainable Chem. Eng. 2017, 5, 9185–9190. 10.1021/acssuschemeng.7b02096

(357) John, A.; Dereli, B.; Ortuño, M. A.; Johnson, H. E.; Hillmyer, M. A.; Cramer, C. J.; Tolman, W. B. – Selective Decarbonylation of Fatty Acid Esters to Linear α‐Olefins – Organometallics 2017, 36, 2956–2964. 10.1021/acs.organomet.7b00411

(356) Kennemur, J. G.; Bates, F. S.; Hillmyer, M. A. – Revisiting the Anionic Polymerization of Methyl Ethacrylate – Macromol. Chem. Phys. 2017, 1700282. 10.1002/macp.201700282

(355) Park, J.; Saba, S. A.; Hillmyer, M. A.; Kang, D.-C.; Seo, M. – Effect of homopolymer in polymerization-induced microphase separation process – Polymer 2017, 126, 338–351. 10.1016/j.polymer.2017.04.046

(354) Onbulak, S.; Wang, Y.; Brutman, J. P.; Hillmyer, M. A. – Synthesis and Utility of Ethylene (Meth)Acrylate Copolymers Prepared by a Tandem Ring-Opening Polymerization Hydrogenation Strategy – J. Polym. Sci. Polym. Chem. 2017, 55, 3117–3126. 10.1002/pola.28686

(353) Fortman, D. J.; Brutman, J. P.; Hillmyer, M. A.; Dichtel, W. R. – Structural effects on the reprocessability and stress relaxation of cross-linked polyhydroxyurethanes – J. Appl. Polym. Sci. 2017, 44984. 10.1002/APP.44984

(352) Radlauer, M.; Fukuta, S.; Matta, M. E.; Hillmyer, M. A. – Controlled synthesis of ABCA' tetrablock terpolymers – Polymer 2017, 124, 60–67. 10.1016/j.polymer.2017.07.025

(351) Wang, Y.; Hillmyer, M. A. – Oxidatively Stable Polyolefin Thermoplastics and Elastomers for Biomedical Applications – ACS Macro Lett. 2017, 6, 613–618. 10.1021/acsmacrolett.7b00277

(350) Larsen, M. B.; Van Horn, J. D.; Wu, F.; Hillmyer, M. A. – Intrinsically Hierarchical Nanoporous Polymers via Polymerization-Induced Microphase Separation – Macromolecules 2017, 50, 4363–4371. 10.1021/acs.macromol.7b00808

(349) Schulze, M. W.; Lewis III, R. M.; Lettow, J. H.; Hickey, R. J.; Gillard, T. M.; Hillmyer, M. A.; Bates, F. S. – Conformational Asymmetry and Quasicrystal Approximants in Linear Diblock Copolymers – Phys. Rev. Lett. 2017, 118, 207801. 10.1103/PhysRevLett.118.207801

(348) Kim, K.; Schulze, M. W.; Arora, A.; Lewis III, R. M.; Hillmyer, M. A.; Dorfmann, K. D.; Bates, F. S. – Thermal processing of diblock copolymer melts mimics metallurgy – Science 2017, 356, 520–523. 10.1126/science.aam7212

(347) Watts, A.; Kurokawa, N.; Hillmyer, M. A. – Strong, Resilient, and Sustainable Aliphatic Polyester Thermoplastic Elastomers – Biomacromolecules 2017, 18, 1845–1854. 10.1021/acs.biomac.7b00283

(346) Schneiderman, D. K.; Hillmyer, M. A. – 50th Anniversary Perspective: There Is a Great Future in Sustainable Polymers – Macromolecules 2017, 50, 3733–3749. 10.1021/acs.macromol.7b00293

(345) Chopade, S. A.; Au, J. G.; Li, Z.; Schmidt, P. W.; Hillmyer, M. A.; Lodge, T. P. – Robust Polymer Electrolyte Membranes with High Ambient-Temperature Lithium-Ion Conductivity via Polymerization-Induced Microphase Separation – ACS Appl. Mater. Interfaces 2017, 9, 14561–14565. 10.1021/acsami.7b02514

(344) Ricarte, R. G.; Li, Z.; Johnson, L. M.; Ting, J. M.; Reineke, T. M.; Bates, F. S.; Hillmyer, M. A.; Lodge, T. P. Direct Observation of Nanostructures during Aqueous Dissolution of Polymer/Drug Particles – Macromolecules 2017, 50, 3143–3152. 10.1021/acs.macromol.7b00372

(343) Li, Z.; Johnson, L. M.; Ricarte, R. G.; Yao, L. J.; Hillmyer, M. A.; Bates, F. S.; Lodge, T. P. – Enhanced Performance of Blended Polymer Excipients in Delivering a Hydrophobic Drug through the Synergistic Action of Micelles and HPMCAS – Langmuir 2017, 33, 2837–2848. 10.1021/acs.langmuir.7b00325

(342) John, A.; Hillmyer, M. A.; Tolman, W. B. – Anhydride-Additive-Free Nickel-Catalyzed Deoxygenation of Carboxylic Acids to Olefins – Organometallics 2017, 36, 506–509. 10.1021/acs.organomet.6b00940

(341) Johnson, L. M.; Li, Z.; LaBelle, A. J.; Bates, F. S.; Lodge, T. P.; Hillmyer, M. A. – Impact of Polymer Excipient Molar Mass and End Groups on Hydrophobic Drug Solubility Enhancement – Macromolecules 2017, 50, 1102−1112. 10.1021/acs.macromol.6b02474

(340) Schulze, M. W.; Hillmyer, M. A. – Tuning Mesoporosity in Cross-Linked Nanostructured Thermosets via Polymerization-Induced Microphase Separation – Macromolecules 2017, 50, 997−1007. 10.1021/acs.macromol.6b02570

(339) Radlauer, M. R.; Sinturel, C.; Asai, Y.; Arora, A.; Bates, F. S.; Dorfman, K. D.; Hillmyer, M. A. – Morphological Consequences of Frustration in ABC Triblock Polymers – Macromolecules 2017, 50, 446–458. 10.1021/acs.macromol.6b02112

(338) Zhang, J.; Schneiderman, D. K.; Li, T.; Hillmyer, M. A.; Bates, F. S. – Design of Graft Block Polymer Thermoplastics – Macromolecules 2016, 49, 9108−9118. 10.1021/acs.macromol.6b02033

(337) Todd, A. D.; McEneany, R. J.; Topolkaraev, V. A.; Macosko, C. W.; Hillmyer, M. A. – Reactive Compatibilization of Poly(ethylene terephthalate) and High-Density Polyethylene Using Amino-Telechelic Polyethylene – Macromolecules 2016, 49, 8988−8994. 10.1021/acs.macromol.6b02080

(336) Moughton, A. O.; Sagawa, T.; Yin, L.; Lodge, T. P. – Multicompartment Micelles by Aqueous Self-Assembly of μ‐A(BC)n Miktobrush Terpolymers – ACS Omega 2016, 1, 1027−1033. 10.1021/acsomega.6b00284 [Correction: 10.1021/acsomega.7b00327]

(335) Neitzel, A. E.; Haversang, T. J.; Hillmyer, M. A. – Organocatalytic Cationic Ring-Opening Polymerization of a Cyclic Hemiacetal Ester – Ind. Eng. Chem. Res. 2016, 55, 11747−11755. 10.1021/acs.iecr.6b03114

(334) Vanderlaan, M. E.; Hillmyer, M. A. – “Uncontrolled” Preparation of Disperse Poly(lactide)-block- poly(styrene)-block-poly(lactide) for Nanopatterning Applications – Macromolecules 2016, 49, 8031−8040. 10.1021/acs.macromol.6b02014

(333) Brutman, J. P; De Hoe, G. X.; Schneiderman, D. K.; Le, T. N.; Hillmyer, M. A. – Renewable, Degradable, and Chemically Recyclable Cross-Linked Elastomers – Ind. End. Chem. Res. 2016, 55, 11097–11106. 10.1021/acs.iecr.6b02931

(332) Radlauer, M. R.; Matta, M. E.; Hillmyer, M. A. – Regioselective cross metathesis for block and heterotelechelic polymer synthesis – Polym. Chem. 2016, 7, 6269–6278. 10.1039/c6py01231k

(331) Tang, D.; Chen, Z.; Correa-Netto, F.; Macosko, C. W.; Hillmyer, M. A.; Zhang, G. – Poly(Urea Ester): A Family of Biodegradable Polymers with High Melting Temperatures – J. Polym. Sci. Polym. Chem. 2016, 54, 3795–3799. 10.1002/pola.28355

(330) Spanjers, C. S.; Schneiderman, D. K.; Wang, J. Z.; Wang, J.; Hillmyer, M. A.; Zhang, K.; Dauenhauer, P. J. – Branched Diol Monomers from the Sequential Hydrogenation of Renewable Carboxylic Acids – ChemCat Chem 2016, 8, 3031–3035. DOI: 10.1002/cctc.201600710

(329) O’Connor, K. S.; Watts, A.; Vaidya, T.; LaPointe, A. M.; Hillmyer, M. A.; Coates, G. W. – Controlled Chain Walking for the Synthesis of Thermoplastic Polyolefin Elastomers: Synthesis, Structure, and Properties – Macromolecules 2016, 49, 6743−6751. DOI: 10.1021/acs.macromol.6b01567

(328) Cheng, C.; Watts, A.; Hillmyer, M. A.; Hartwig, J. F. – Polysilylether: A Degradable Polymer from Biorenewable Feedstocks – Angew. Chem. Int. Ed. 2016, 55, 11872 –11876. DOI: 10.1002/anie.201606282

(327) Xu, Y.; Delgado, P.; Todd, A. D.; Loi, J.; Saba, S. A.; McEneany, R. J.; Tower, T.; Topolkaraev, Macosko, C. W.; Hillmyer, M. A. – Lightweight micro-cellular plastics from polylactide/polyolefin hybrids – Polymer 2016, 102, 73–83. DOI: 10.1016/j.polymer.2016.08.102

(326) Mousavi, M. P. S.; Saba, S. A.; Anderson, E. L.; Hillmyer, M. A.; Bühlmann, P. – Avoiding Errors in Electrochemical Measurements: Effect of Frit Material on the Performance of Reference Electrodes with Porous Frit Junctions – Anal. Chem. 2016, 88, 8706−8713. DOI: 10.1021/acs.analchem.6b02025

(325) Ricarte, R. G.; Lodge, T. P.; Hillmyer, M. A. – Nanoscale Concentration Quantification of Pharmaceutical Actives in Amorphous Polymer Matrices by Electron Energy-Loss Spectroscopy – Langmuir 2016, 32, 7411–7419. DOI: 10.1021/acs.langmuir.6b01745

(324) Delgado, P. A.; Brutman, J. P.; Masica, K.; Molde, J.; Wood, B.; Hillmyer, M. A. – High surface area carbon black (BP-2000) as a reinforcing agent for poly[(+/-)-lactide] – J. Appl. Polym. Sci. 2016, 43962. DOI: 10.1002/APP.43926

(323) Pehere, A. D.; Xu, S.; Thompson, S. K.; Hillmyer, M. A.; Hoye, T. R. – Diels–Alder Reactions of Furans with Itaconic Anhydride: Overcoming Unfavorable Thermodynamics – Org. Lett. 2016, 18, 2584–2587. DOI: 10.1021/acs.orglett.6b00929

(322) Ren, N.; Matta, M. E.; Martinez, H.; Walton, K. L.; Munro, J. C.; Schneiderman, D. K.; Hillmyer, M. A. – Filler-Reinforced Elastomers Based on Functional Polyolefin Prepolymers – Ind. Eng. Chem. Res. 2016, 55, 6106–6112. DOI: 10.1021/acs.iecr.6b00426

(321) Gallagher, J. J.; Hillmyer, M. A.; Reineke, T. M. – Acrylic Triblock Copolymers Incorporating Isosorbide for Pressure Sensitive Adhesives – ACS Sustainable Chem. Eng. 2016, 4, 3379–3387. DOI: 10.1021/acssuschemeng.6b00455

(320) Schneiderman, D. K.; Vanderlaan, M. E.; Mannion, A. M.; Panthani, T. R.; Batise, D. C.; Wang, J. Z.; Bates, F. S.; Macosko, C. W.; Hillmyer, M. A. – Chemically Recyclable Biobased Polyurethanes – ACS Macro Lett. 2016, 5, 515–518. DOI: 10.1021/acsmacrolett.6b00193

(319) Schneiderman, D. K.; Hillmyer, M. A. – Aliphatic Polyester Block Polymer Design – Macromolecules 2016, 49, 2419–2428. DOI: 10.1021/acs.macromol.6b00211

(318) Yao, L.; Oquendo, L. E.; Schulze, M. W.; Lewis III, R. M. Gladfelter, W. L.; Hillmyer, M. A. – Poly(cyclohexylethylene)-block-Poly(lactide) Oligomers for Ultrasmall Nanopatterning Using Atomic Layer Deposition – ACS Appl. Mater. Interfaces 2016, 8, 7431–7439. DOI: 10.1021/acsami.5b12785

(317) Zhang, J.; Li, T.; Mannion, A. M.; Schneiderman, D. K.; Hillmyer, M. A. – Tough and Sustainable Graft Block Copolymer Thermoplastics – ACS Macro Lett. 2016, 5, 407–412. DOI: 10.1021/acsmacrolett.6b00091

(316) Chopade, S. A.; So, S.; Hillmyer, M. A.; Lodge, T. P. – Anhydrous Proton Conducting Polymer Electrolyte Membranes via Polymerization-Induced Microphase Separation – ACS Appl. Mater. Interfaces 2016, 8, 6200–6210. DOI: 10.1021/acsami.5b12366

(315) Marlier, E. E.; Macaranas, J. A.; Marell, D. J.; Dunbar, C. R.; Johnson, M. A.; DePorre, Y.; Miranda, M. O.; Neisen, B. D.; Cramer, C. J.; Hillmyer, M. A. – Mechanistic Studies of ε‐Caprolactone Polymerization by (salen)AlOR Complexes and a Predictive Model for Cyclic Ester Polymerizations – ACS Catal. 2016, 6, 1215−1224. DOI: 10.1021/acscatal.5b02607

(314) Jackson, E. A.; Lee, Y.; Radlauer, M. R.; Hillmyer, M. A. – Well-Ordered Nanoporous ABA Copolymer Thin Films via Solvent Vapor Annealing, Homopolymer Blending, and Selective Etching of ABAC Tetrablock Terpolymers – ACS Appl. Mater. Interfaces 2015, 7, 27331−27339. DOI: 10.1021/acsami.5b08856

(313) Dalsin, S. J.; Rions-Maehren, T. G.; Beam, M. D.; Bates, F. S.; Hillmyer, M. A.; Matsen, M. W. – Bottlebrush Block Polymers: Quantitative Theory and Experiments – ACS Nano 2015, 9, 12233–12245. DOI: 10.1021/acsnano.5b05473

(312) Fortman, D. J.; Brutman, J. P.; Cramer, C. J.; Hillmyer, M. A.; Dichtel, W. R. – Mechanically Activated, Catalyst-Free Polyhydroxyurethane Vitrimers – J. Am. Chem. Soc. 2015, 137, 14019−14022.

DOI: 10.1021/jacs.5b08084

(311) Sinturel, C.; Bates, F. S.; Hillmyer, M. A. – High χ−Low N Block Polymers: How Far Can We Go? – ACS Macro Lett. 2015, 4, 1044–1050. DOI: 10.1021/acsmacrolett.5b00472

(310) Schulze, M. W.; Sinturel, C.; Hillmyer, M. A. – Poly(cyclohexylethylene)-block-poly(ethylene oxide) Block Polymers for Metal Oxide Templating – ACS Macro Lett. 2015, 4, 1027−1032.
DOI: 10.1021/acsmacrolett.5b00458

(309) Wang, Y.; Hillmyer, M. A. – Hydroxy-telechelic poly(ethylene-co-isobutylene) as a soft segment for thermoplastic polyurethanes – Polym. Chem. 2015, 6, 6806–6811. DOI: 10.1039/C5PY00990A

(308) Zhou, C.; Toombes, G. E. S.; Wasbrough, M. J.; Hillmyer, M. A.; Lodge, T. P. – Structure of Two-Compartment Hydrogels from Thermoresponsive ABC Triblock Terpolymers – Macromolecules 2015, 48, 5934–5943. DOI: 10.1021/acs.macromol.5b00584

(307) Ding, K.; John, A.; Shin, J.; Lee, Y.; Quinn, T.; Tolman, W. B.; Hillmyer, M. A. – High-Performance Pressure-Sensitive Adhesives from Renewable Triblock Copolymers – Biomacromolecules 2015, 16, 2537–2539. DOI: 10.1021/acs.biomac.5b00754

(306) Saba, S. A.; Mousavi, M. P. S.; Bühlmann, P.; Hillmyer, M. A. – Hierarchically Porous Polymer Monoliths by Combining Controlled Macro- and Microphase Separation – J. Am. Chem. Soc. 2015, 137, 8896–8899. DOI: 10.1021/jacs.5b04992

(305) Dalsin, S. J.; Hillmyer, M. A.; Bates, F. S. – Linear Rheology of Polyolefin-Bases Bottlebrush Polymers – Macromolecules 2015, 48, 4680–4691. DOI: 10.1021/acs.macromol.5b01153

(304) Schneiderman, D. K.; Hill, E. M.; Martello, M. T.; Hillmyer, M. A. – Poly(lactide)-block-poly(ε-caprolactone-co-ε-decalactone)-block-poly(lactide) copolymer elastomers – Polym. Chem. 2015, 6, 3641–3651. DOI: 10.1039/C5PY00202H

(303) Xu, Y.; Loi, J.; Delgado, P.; Topolkaraev, V.; McEneany, R. J.; Macosko, C. W.; Hillmyer, M. A. – Reactive Compatibilization of Polylactide/Polypropylene Blends – Ind. Eng. Chem. Res. 2015, 54, 6108–6114.

DOI: 10.1021/acs.iecr.5b00882

(302) Gallagher, J. J; Hillmyer, M. A.; Reineke, T. M. – Isosorbide-based Polymethacrylates – ACS Sustainable Chem. Eng. 2015, 3, 662–667. DOI: 10.1021/sc5008362

(301) Martinez, H.; Zhang, J.; Kobayashi, S.; Xu, Y.; Pitet, L.; Matta, M. E.; Hillmyer, M. A. – Functionalized regio-regular linear polyethylenes from the ROMP of 3-substituted cyclooctenes – Appl. Petrochem. Res.

Yüklə 0,71 Mb.

Dostları ilə paylaş:
  1   2   3   4   5

Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur © 2022
rəhbərliyinə müraciət

    Ana səhifə