Iwshm 2009 – Awards



Yüklə 49,94 Kb.
tarix30.10.2017
ölçüsü49,94 Kb.
#22181

IWSHM 2013 – Awards 

Hans-Juergen Schmidt Award

 Individuals in the SHM community, recognized for their outstanding leadership in advancing technologies in industry and government, will be selected by an Award Committee representative of the world-wide SHM community to receive during every SHM workshop (International Workshop on Structural Health Monitoring [IWSHM], European Workshop on Structural Health Monitoring [EWSHM] and Asia-Pacific Workshop on Structural Health Monitoring [APWSHM]) the SHM Hans-Juergen Schmidt Award. The Award, evaluation criteria, Award Committee composition, nomination and selection procedures are described below.



I.       Eligibility

Any individual from government agencies and industry of the world region (Americas, Europe or Asia-Pacific) of the SHM Workshop being considered is eligible.



II.      Nomination criteria

The Structural Health Monitoring Hans-Juergen Schmidt Award is established to recognize an individual for his or her outstanding leadership in advancing technologies in industry and government.

The Award is named after Hans-Juergen Schmidt, whose views and efforts have made a significant impact on the progress of Structural Health Monitoring technologies in industry.

III.    Award Committee

The gathering of all the members of the Scientific or Steering Committees of the three workshops constitutes the Award Committee. This Award Committee can be considered as most representative of the world-wide SHM community, gathering faculty members from academic institutions, researchers from the main research institutions and industrialists with a broad view of technology.

The Award Committee Chairman will be chosen from among the Award Committee members by the Chairmen of the three Workshops for a 2-year term in office. His primary responsibility is to make sure the committee functions and, based on the votes from the Award Committee members, to rank the candidates.

IV.    Nomination procedure

The nominator must be a member of the Scientific or Steering Committee of the Workshop that is responsible for the award ceremony.

The nomination letter, limited to four letter-size pages (1 inch margins, Times Roman 12 font) shall contain a candidate’s bio as it relates to SHM activities, a description of the candidate’s contributions and their impact, and a closing summary of what sets this candidate apart from others in the field.  A full CV of the candidate may also be attached at the nominator’s discretion. Self-nominations are not permitted.

The nomination letter shall be sent directly to the Award Committee Chairman at least two months before the Workshop. 



V.     Selection procedure

The letters of nomination will be sent by the Chairman of the Award Committee to all the members of the Award Committee. They will have one month to review the nominations and to send to the Award Committee Chairman their votes for their top three choices.



VI.    Award presentation

During the Workshop, a plaque accompanied by a check will be presented by the Chairman of the Award Committee.

The Chairman of the Award Committee and the Chairman of the Workshop are in charge of organizing the Award presentation ceremony.

Chairman of the Award Committee:

Claus-Peter Fritzen

Prof. Institut für Mechanik und Regelungstechnik

Technische Mechanik Group

Room: PB-A 211

Paul-Bonatz-Straße 9-11


57076 Siegen

Germany
Tel:  0271/740-4621/4622/4633


Fax: 0271/740-2769

Web: http://www.uni-siegen.de/fb11/imr3/?lang=de

E-mail: fritzen@imr.mb.uni-siegen.de


Annex I

Composition of the Award Committee for 2013

 

Considering the composition of the following committees:



i)              The Workshop Committee of VIth IWSHM held in Stanford (September 2007),

ii)             The Steering Committee of the IIIrd EWSHM held in Granada (July 2006),

iii)            The International Scientific Committee of the Ist APWSHM held in Yokohama (December 2006),

the composition of the Hans Juergen Schmidt Award Committee is the following:

Adams D., Purdue University, USA

Akhras G., Royal Mil. College, Canada

Arms S., Microstrain, USA

Asanuma H., Chiba Univ., Japan

Balageas D., ONERA, France

Bannister M., CRC-ACS, Australia

Boller C., Univ. Sheffield, UK

Brownjohn J., Univ. Sheffield, UK

Budelmann H., U. Braunschweig, Germany

Buderath M., EADS, Germany

Casas J. R., UPC, Spain

Casciati F., Univ. Pavia, Italy

Caussignac J.-M., LCPC, France

Cawley P., Imperial College, UK

Chang C. C., HKUST, China

Chang F.K., Stanford University, USA

Chen W.M., Chongqing Univ., China

Chiu W. K., Monash Univ., Australia

Culshaw B., Strathclyde Univ., UK

Déom A., ONERA, France

Derriso M., Wright-Patterson Air Force Laboratories, USA

Emin Aktan A., Drexel University, USA

Farrar C., Los Alamos National Laboratory, USA

Fassois S., Univ. Patras, Greece

Feng M. Q., UC Irvine, USA

Fernando G., Cranfield Univ., UK

Finlayson R., Physical Acoustics, USA

Foote P., BAE, UK

Fritzen C.-P., Univ. Siegen, Germany

Fujino Y., Univ. of Tokyo, Japan

Fujita T., Univ. of Tokyo, Japan

Gabbert U., Univ. Magdeburg, Germany

Galea S., DSTO, Australia

Giurgiutiu V., AFRL/AFOSR, USA

Gobin P.-F., INSA Lyo,n France

Golinval J.-C., Univ. Liège, Belgium

Gordon G., Honeywell, USA

Güemes A., UPM, Spain

Habel W., BAM Berlin, Germany

Hamamoto H., Musashi Institute of Technology, Japan

Haugse E., Boeing Company, USA

Holnicki-Szulc J., IFTR Warsaw, Poland

Hyde S., ATK, USA

Inada H., Shimizu Corporation, Japan

Inaudi D., SMARTEC, Switzerland

Inman D., Virginia Tech, USA

Ishikawa T., JAXA, Japan

Jambor B., Lockheed-Martin, USA

Jata K., Air Force Research Laboratories, USA

Kageyama K., Univ. of Tokyo, Japan

Kaneko Y., Tohoku Univ., Japan

Kawiecki G., Gamesa D.A., Spain

Kim C. G., KAIST, Korea

Kim S. J., Seoul National Univ., Korea

Kiremidjian A., Stanford University, USA

Koh C., National University of Singapore, Singapore

Kumar A., Acellent Technologies, USA

Kundu T., Univ. of Arizona, USA

Lamattina B., Army Research Office, USA

Le D., Federal Aviation Administration, USA

Lee B.L., Air Force Office of Scientific Research, USA

Levin K., FOI, Sweden

Li H., Harbin Institute of Technology, China

Li J., Tongji Univ., China

Livingston R., Federal Highway Administration, USA

Lloyd P., Defense Research Agency, United Kingdom

Loh C.H., National Taiwan Univ., Taiwan

Mahmood S., Naval Surface Warfare Center, USA

Maia N., IST, Portugal

Mita A., Keio Univ., Japan

Nishimura I., Musashi Institute of Technology, Japan

Nishitani A., Waseda Univ., Japan

Ostachowicz W., Polish Academy of Sciences, Poland

Ou J., Harbin Institute of Technology, China

Paget C., Airbus, UK

Papadimitriou C., Univ. of Thessaly, Greece

Peil U., Techn. Univ. Braunschweig, Germany

Prosser W., NASA-Langley, USA

Rajic N., DSTO, Australia

Richards L., NASA-Dryden, USA

Sakurai T., RIMCOF, Japan

Salvia M., Ecole Centrale Lyon, France

Saravanos D., Univ. Patras, Greece

Shang H. M., Nanyang Technological Univ., Singapore

Sikorsky C., California Department of Transportation, USA

Speckmann H., Airbus, Germany

Spencer B.F., Univ. of Illinois at Urbana-Champaign, USA

Staszewski W., Univ. Sheffield, UK

Takatsubo J., AIST, Japan

Takeda N., Univ. of Tokyo, Japan

Thomson D., Univ. of Manitoba, Canada

Todoroki A., Tokyo Institute of Technology, Japan

Tur M., Univ. Tel Aviv, Israel

Wang G., Norwegian Def. Res., Norway

Wang X., Univ. Nanjing, China

Wu Z., Ibaraki Univ., Japan

Xue S., Kinki Univ., Japan

Yun C. B., KAIST, Korea

 

 

 



Annex II

Nominators for the IIIrd EWSHM 2006

 

The nominators for the IIIrd EWSHM (Granada, July 2006) were the members of the EWSHM Steering Committee:



Akhras G., Royal Mil. College, Canada

Asanuma H., Chiba Univ., Japan

Balageas D., ONERA, France

Bannister M., CRC-ACS, Australia

Boller C., Univ. Sheffield, UK

Buderath M., EADS, Germany

Budelmann H., U. Braunschweig, Germany

Casas J. R., UPC, Spain

Casciati F., Univ. Pavia, Italy

Caussignac J.-M., LCPC, France

Cawley P., Imperial College, UK

Chang F.K., Stanford University, USA

Culshaw B., Strathclyde Univ., UK

Déom A., ONERA, France

Fassois S., Univ. Patras, Greece

Fernando G., Cranfield Univ., UK

Fritzen C.-P., Univ. Siegen, Germany

Gabbert U., Univ. Magdeburg, Germany

Giurgiutiu V., Univ. South Carolina, USA

Gobin P.-F., INSA Lyo,n France

Golinval J.-C., Univ. Liège, Belgium

Güemes A., UPM, Spain

Habel W., BAM Berlin, Germany

Holnicki-Szulc J., IFTR Warsaw, Poland

Inaudi D., SMARTEC, Switzerland

Kawiecki G., Gamesa D.A., Spain

Kundu T., Univ. of Arizona, USA

Levin K., FOI, Sweden

Maia N., IST, Portugal

Paget C., Airbus, UK

Papadimitriou C., Univ. of Thessaly, Greece

Peil U., Univ. Braunschweig, Germany

Salvia M., Ecole Centrale Lyon, France

Saravanos D., Univ. Patras, Greece

Staszewski W., Univ. Sheffield, UK

Takeda N., University of Tokyo, Japan

Tur M., Univ. Tel Aviv, Israel

Wang G., Norwegian Def. Res., Norway

Wang X., Univ. Nanjing, China

 

 



Annex III

Nominators for the Ist APWSHM 2006

 

The possible nominators for the Ist APWSHM (Yokohama, December 2006) were the members of the APWSHM International Scientific Committee:



 

Boller C., University of Sheffield, UK

Brownjohn J., Univ. Sheffield, UK

Chang C. C., HKUST, China

Chen W.M., Chongqing Univ., China

Chang F.K., Stanford University, USA

Chiu W. K., Monash Univ., Australia

Feng M. Q., UC Irvine, USA

Fujino Y., Univ. of Tokyo, Japan

Fujita T., Univ. of Tokyo, Japan

Galea S., DSTO, Australia

Hamamoto H., Musashi Institute of Technology, Japan

Ishikawa T., JAXA, Japan

Kageyama K., Univ. of Tokyo, Japan

Kaneko Y., Tohoku Univ., Japan

Kim C. G., KAIST, Korea

Kim S. J., Seoul National Univ., Korea

Li H., Harbin Institute of Technology, China

Li J., Tongji Univ., China

Loh C.H., National Taiwan Univ., Taiwan

Mita A., Keio Univ., Japan

Nishimura I., Musashi Institute of Technology, Japan

Nishitani A., Waseda Univ., Japan

Ou J., Harbin Institute of Technology, China

Rajic N., DSTO, Australia

Sakurai T., RIMCOF, Japan

Speckmann H., Airbus, Germany

Shang H. M., Nanyang Technological Univ., Singapore

Spencer B.F., Univ. of Illinois at Urbana-Champaign, USA

Takatsubo J., AIST, Japan

Takeda N., Univ. of Tokyo, Japan

Todoroki A., Tokyo Institute of Technology, Japan

Wu Z., Ibaraki Univ., Japan

Xue S., Kinki Univ., Japan

Yun C. B., KAIST, Korea

Annex IV

Nominators for the VIth IWSHM 2007

 

The nominators for the VIth IWSHM are the members of the IWSHM Workshop Committee:



 

Adams D., Purdue University, USA

Arms S., Microstrain, USA

Balageas D. , ONERA, France

Boller C., University of Sheffield, United Kingdom

Buderath M., EADS, Germany

Casciati F., University of Pavia, Italy

Chang F.K., Stanford University, USA

Derriso M., Wright-Patterson Air Force Laboratories, USA

Emin Aktan A., Drexel University, USA

Farrar C., Los Alamos National Laboratory, USA

Finlayson R., Physical Acoustics, USA

Foote P., BAE, UK

Fritzen C., University of Siegen, Germany

Galea S., DSTO Australia, Australia

Giurgiutiu V., AFRL/AFOSR, USA

Gordon G., Honeywell, USA

Guemes A.  (Co-Chairman), Universidad Politecnica De Madrid, Spain

Haugse E., Boeing Company, USA

Hyde S., ATK, USA

Inada H., Shimizu Corporation, Japan

Inman D., Virginia Tech, USA

Jambor B., Lockheed-Martin, USA

Jata K., Air Force Research Laboratories, USA

Kiremidjian A., Stanford University, USA

Koh C., National University of Singapore, Singapore

Kumar A., Acellent Technologies, USA

Lamattina B., Army Research Office, USA

Le D., Federal Aviation Administration, USA

Lee B.L., Air Force Office of Scientific Research, USA

Livingston R., Federal Highway Administration, USA

Lloyd P., Defense Research Agency, United Kingdom

Mahmood S., Naval Surface Warfare Center, USA

Mita A., Keio University, Japan

Ostachowicz W., Polish Academy of Sciences, Poland

Ou J., Harbin Institute of Technology, China

Peil U., Technical University of Braunschweig, Germany

Prosser W., NASA-Langley, USA

Richards L., NASA-Dryden, USA

Sikorsky C., California Department of Transportation, USA

Speckmann H., Airbus, Germany

Spencer B., University of Illinois, USA

Takeda N., University of Tokyo, Japan

Thomson D., University of Manitoba, Canada



Wu Z., Ibaraki University, Japan

Yun C., KAIST, Korea
Yüklə 49,94 Kb.

Dostları ilə paylaş:




Verilənlər bazası müəlliflik hüququ ilə müdafiə olunur ©muhaz.org 2024
rəhbərliyinə müraciət

gir | qeydiyyatdan keç
    Ana səhifə


yükləyin