Conclusion: Approved.
S2-001439 from Siemens: Compatibility GTPv0/GTPv1 in case of SGSN change (on 23.060, CR 177, cat F, R99)
This CR clarifies some principles of inter-Releases interworking.
Discussion: The header states “29.060”: this has to be corrected.
“must” shall be replaced by “shall”.
The related CR to 29.060 was presented last week to N4, and the decision was to wait for S2’s decision first.
Conclusion: Editorially revised to S2-001531.
S2-001531 from Siemens: Compatibility GTPv0/GTPv1 in case of SGSN change (on 23.060, CR 177r1, cat F, R99)
Editorial revision of S2-001439
Conclusion: Approved.
S2-001491 from Motorola: IP v6 address stateless autoconfiguration (on 23.060, CR 180, cat F, R99)
This CR proposes to delete “Ipv6 Stateless Address Autoconfiguration Procedure” from the annex and to create, in the main body, a new subsection called “9.2.2.1.1 Ipv6 Dynamic Address Allocation”
Discussion: The proposed new section is not compliant with IP v6, according to Nokia, and is not equivalent to the section deleted in the annex.
Ericsson has also some comments, which can be seen by pointing the mouse on the highlighted text.
From a formal point of view, the use of square brackets should be avoided, as well as the use of comments. Also the version number is incorrect and the use of references is not properly performed.
Conclusion: Not approved. Later revised to S2-001543.
S2-001543 from Motorola: IP v6 address stateless autoconfiguration (on 23.060, CR 180r1, cat F, R99)
Revision of S2-001491
Dostları ilə paylaş: |
